Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Image sensors are electronic devices that capture images and convert them into digital signals that can be processed and stored in electronic devices such as cameras, smartphones, and security systems. They are a critical component of digital imaging technology and have revolutionized the way we capture and store visual information.Image sensors work by detecting and converting light into electrical signals. They typically consist of a grid of millions of tiny photodiodes, each of which generates an electrical charge in response to the amount of light it receives. When light enters the sensor, it is absorbed by the photodiodes, which generate a corresponding electrical signal. The signals from each photodiode are then combined to form a digital image.There are two main types of image sensors: charge-coupled devices (CCDs) and complementary metal-oxide-semiconductor (CMOS) sensors. CCDs are the older of the two technologies and are characterized by their high image quality, low noise, and low power consumption. CMOS sensors, on the other hand, are more modern and are known for their high-speed performance, low power consumption, and lower cost.Image sensors are widely used in a variety of applications, including digital cameras, smartphones, security systems, and medical imaging. They have also enabled the development of new technologies such as virtual and augmented reality, self-driving cars, and facial recognition.
Add filters
All
Selected
NOIP1FN5000A-QTI
Onsemi
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Output Interface Type: 4-WIRE INTERFACE; Optical Format (inch): 1; Minimum Operating Temperature: -40 Cel;
GLOBAL SHUTTER; IT ALSO OPERATES AT 3.3 V NOMINAL SUPPLY VOLTAGE
FRAME
19 inch
2.41 mm
19 mm
60 dB
100 fps
2592
360 MHz
SURFACE MOUNT
85 Cel
-40 Cel
1
4-WIRE INTERFACE
SQUARE
4.8X4.8
IMAGE SENSOR,CMOS
400-1000
1.9 V
1.7 V
SOLDER
2048
NOIP1SE2000A-QTI
NOIP1SE2000A-QTI by Onsemi is a 1920x1200 CMOS image sensor with 4.8x4.8 um pixel size, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of up to 230 fps. Ideal for high-resolution imaging applications requiring fast capture speeds and precise light sensitivity.
230 fps
1920
2/3
1200
NOIP1SE5000A-QTI
NOIP1SE5000A-QTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of up to 100 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
NOIP1SN2000A-QTI
NOIP1SN2000A-QTI by Onsemi features 4.8x4.8 um pixel size, 360 MHz master clock, and 1920x1200 resolution. This image sensor is ideal for high-speed imaging applications requiring a dynamic range of 60 dB and a frame rate of 230 fps in an optical format of 2/3 inch.
NOIP1SN5000A-QTI
NOIP1SN5000A-QTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of 100 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
NOIP3SE5000A-QDI
NOIP3SE5000A-QDI by Onsemi is an image sensor with 4.8x4.8 um pixel size, 360 MHz master clock, and 2592 horizontal pixels. It operates b/w -40 to 85 °C and has a dynamic range of 60 dB. Ideal for applications requiring high-resolution imaging at a frame rate of 45 fps.
45 fps
NOIP3SE5000A-QTI
NOIP3SE5000A-QTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, 60 dB dynamic range, and 45 fps frame rate. It operates b/w -40 to 85 °C and has a spectral response of 400-1000 nm. Ideal for applications requiring high-resolution imaging in various lighting conditions.
NOIP3SN5000A-QDI
NOIP3SN5000A-QDI by Onsemi features 4.8x4.8 um pixel size, 360 MHz master clock, and 2592x2048 resolution. Ideal for image sensing applications with a frame rate of 45 fps and spectral response of 400-1000 nm.
NOIP3SN5000A-QTI
NOIP3SN5000A-QTI by Onsemi features 4.8x4.8 um pixel size, 360 MHz master clock, and 2592 horizontal pixels. Ideal for image sensing applications with a frame rate of 45 fps, spectral response of 400-1000 nm, and sensitivity of 7.5 V/lx.s.
ASX340AT2C00XPED0-DRBR1
ASX340AT2C00XPED0-DRBR1 by Onsemi is a 5600x5600 pixel CMOS image sensor with a 27 MHz master clock and 1/4 inch optical format. It operates b/w -40 to 85 °C, has a dynamic range of 87 dB, and outputs digital voltage in the range of 0.84-1.96V. Ideal for applications requiring high-resolution imaging at up to 60 fps with a sensitivity of 16.5 V/lx.s.
ELECTRONIC ROLLING SHUTTER; IT ALSO OPERATES AT 2.8 V ANALOG NOMINAL SUPPLY VOLTAGE
7.5 inch
1.28 mm
7.5 mm
27 Mbps
87 dB
60 fps
728
PLASTIC
e1
27 MHz
50 mA
1/4
2-WIRE INTERFACE
0.84-1.96V
DIGITAL VOLTAGE
5600X5600
1.95 V
Tin/Silver/Copper (Sn/Ag/Cu)
560
NOIP1FN2000A-LTI
NOIP1FN2000A-LTI by Onsemi features 1920x1200 resolution, 4.8um pixel size, and 360MHz master clock. Ideal for high-speed imaging applications with a frame rate of 230fps.
1.78 mm
NOIP1FN5000A-LTI
NOIP1FN5000A-LTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of 100 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
NOIP1SE2000A-LTI
NOIP1SE2000A-LTI by Onsemi features 4.8X4.8 um pixel size, 360 MHz master clock, and 1920x1200 resolution. Ideal for image sensing applications with a spectral response of 400-1000 nm and frame rate of 230 fps.
NOIP1SE5000A-LTI
NOIP1SE5000A-LTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592H x 2048V pixels, operating at 100 fps with a dynamic range of 60 dB. It has a spectral response of 400-1000 nm and sensitivity of 7.5 V/lx.s, suitable for frame array applications in various industries like surveillance and automotive systems.
NOIP1SN2000A-LTI
NOIP1SN2000A-LTI by Onsemi features 4.8x4.8 um pixel size, 360 MHz master clock, and 1920x1200 resolution. Ideal for image sensing applications with a spectral response of 400-1000 nm and frame rate of 230 fps.
NOIP1SN5000A-LTI
NOIP1SN5000A-LTI by Onsemi is an image sensor with 4.8x4.8 um pixel size, 360 MHz master clock, and 2592 horizontal pixels. It operates b/w -40 to 85 °C and has a dynamic range of 60 dB. Ideal for applications requiring high-resolution imaging at a fast frame rate of 100 fps.
NOIP3SE5000A-LTI
NOIP3SE5000A-LTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592 (H) x 2048 (V) pixels, operating at 45 fps. It has a dynamic range of 60 dB and spectral response of 400-1000 nm. Ideal for applications requiring high-resolution imaging in industrial automation and surveillance systems.
NOIP3SN5000A-LTI
NOIP3SN5000A-LTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592H x 2048V pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of up to 45 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
KLI-8023-AAA-ER-AA
KLI-8023-AAA-ER-AA by Onsemi is an Image Sensor with 9x9 um pixel size, 8002 horizontal and vertical pixels. It operates b/w 0 to 70 °C, with a dynamic range of 84 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
LINEAR
15.49 inch
6.1 mm
93.98 mm
6 Mbps
84 dB
8002
CERAMIC
THROUGH HOLE MOUNT
70 Cel
0 Cel
5.2-5.5V
ANALOG VOLTAGE
RECTANGULAR
9X9
IMAGE SENSOR,CCD
350-850
15.5 V
14.5 V
KAI-43140-AXA-JP-B2
KAI-43140-AXA-JP-B2 by Onsemi is an image sensor with 4.5x4.5 um pixel size, 8040 horizontal pixels, and 5360 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 60 dB. Ideal for applications requiring high-resolution imaging in various industries.
IT AS OUTPUT SENSITIVITY OF 42 MICRO VOLT PER ELECTRON
INTERLINE
45.34 inch
3.61 mm
47.24 mm
60 Mbps
8040
11 mA
-50 Cel
1.7
4.5X4.5
5360
KAI-43140-FXA-JD-B2
KAI-43140-FXA-JD-B2 by Onsemi is an image sensor with 4.5x4.5 um pixel size, 8040 horizontal pixels, and 5360 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 60 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
AR0135AT2M00XUEA0-TRBR
The Onsemi AR0135AT2M00XUEA0-TRBR image sensor features 1280x960 resolution, 3.75um pixel size, and 67.7dB dynamic range. Ideal for applications requiring high-quality digital imaging with a frame rate of 54fps in a compact square package.
GLOBAL SHUTTER
9 inch
1.39 mm
9 mm
67.7 dB
54 fps
1280
50 MHz
60 mA
105 Cel
1/3
0.40-2.5V
DIGITAL OUTPUT
3.75
960
ASX342ATSC00XPED0-TP
ASX342ATSC00XPED0-TP by Onsemi is a 5.6x5.6 um CMOS image sensor with 728H x 560V pixels, offering a dynamic range of 87 dB and operating at temperatures from -40 to 105 °C. It has a digital voltage output interface, operates at a max supply voltage of 1.95 V, and features a square package style suitable for surface mount applications in various imaging systems.
IT ALSO HAVE ANALOG VOLTAGE FROM 2.66 TO 2.94V, ELECTRONIC ROLLING SHUTTER
5.6X5.6
ASX342ATSC00XPED0-TR
ASX342ATSC00XPED0-TR by Onsemi is an image sensor with 5.6x5.6 um pixel size, 27 MHz master clock, and 1/4 inch optical format. It operates b/w -40 to 105 °C and has a dynamic range of 87 dB. Ideal for applications requiring high-resolution imaging at a fast frame rate such as surveillance cameras or industrial machine vision systems.
AR0220AT3B00XUD20
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.20V; Horizontal Pixel: 1828;
1.65 mm
12 mm
120 dB
1828
220 mA
1/1.8
0.40-1.20V
1.26 V
1.14 V
948
AR0220AT3B00XUEA0-DPBR
The Onsemi AR0220AT3B00XUEA0-DPBR is an image sensor with 1828x948 pixels, offering a dynamic range of 120 dB. It operates at temperatures from -40 to 105 °C and has a max supply voltage of 1.26V. Ideal for applications requiring high-resolution imaging in varying environmental conditions.
KAI-47051-AXA-JP-B2
KAI-47051-AXA-JP-B2 by Onsemi is an image sensor with 5.5x5.5 um pixel size, 40 MHz master clock, and 66 dB dynamic range. It is suitable for applications requiring high-resolution imaging in a compact form factor, such as industrial machine vision systems or medical imaging devices.
IT HAS A SENSITIVITY OF 38 MICRO VOLT PER ELECTRON, ELECTRONIC SHUTTER
44.55 inch
3.25 mm
69.96 mm
66 dB
7 fps
8856
40 MHz
5.5X5.5
5280
NOIP1FN012KA-GTI
NOIP1FN012KA-GTI by Onsemi is a 4.5x4.5 um CMOS image sensor with 4096x3072 resolution, 59 dB dynamic range, and 160 fps frame rate. It operates b/w -40 to 85 °C and has a supply voltage range of 1.7-1.9 V. Ideal for high-speed imaging applications in industrial automation and surveillance systems due to its high sensitivity and fast frame rate capabilities.
36.1 inch
3.5 mm
43.1 mm
59 dB
160 fps
4096
4/3
3072
NOIP1FN016KA-GTI
NOIP1FN016KA-GTI by Onsemi is an Image Sensor with 4.5x4.5 um pixel size, 360 MHz master clock, and 4096x4096 resolution. It operates b/w -40 to 85 °C and has a dynamic range of 59 dB. Ideal for high-speed imaging applications requiring precise detail capture at varying light levels.
120 fps
NOIP1FN025KA-GTI
NOIP1FN025KA-GTI by Onsemi is a 4.5X4.5 um CMOS image sensor with 5120x5120 pixels, offering a dynamic range of 59 dB and sensitivity of 5.8 V/lx.s. It operates at a max supply voltage of 1.9V, has a master clock of 360 MHz, and is suitable for applications requiring high-resolution imaging at up to 80 fps frame rate.
80 fps
5120
1.28
NOIP1SE012KA-GTI
NOIP1SE012KA-GTI by Onsemi is an image sensor with 4.5x4.5 um pixel size, 360 MHz master clock, and 4096 horizontal pixels. It is ideal for applications requiring high-speed imaging with a frame rate of 160 fps and a dynamic range of 59 dB in a compact rectangular package measuring 43.1mm x 36.1mm x 3.5mm.
NOIP1SE016KA-GTI
NOIP1SE016KA-GTI by Onsemi is an Image Sensor with 4.5X4.5 um pixel size, 360 MHz master clock, and 4096x4096 resolution. It operates b/w -40 to 85 °C and has a dynamic range of 59 dB. Ideal for high-speed imaging applications requiring precise color reproduction and low-light performance.
NOIP1SE025KA-GTI
NOIP1SE025KA-GTI by Onsemi is an image sensor with 5120x5120 pixels, 4.5um pixel size, and 360MHz master clock. It operates b/w -40 to 85 °C and has a dynamic range of 59dB. Ideal for high-resolution imaging applications requiring fast frame rates up to 80fps.
NOIP1SN012KA-GTI
NOIP1SN012KA-GTI by Onsemi is a CMOS image sensor with 4.5x4.5 um pixel size, offering 4096x3072 resolution and 59 dB dynamic range. It operates at 1.7-1.9 V, has a master clock of 360 MHz, and supports a frame rate of 160 fps. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
NOIP1SN016KA-GTI
NOIP1SN016KA-GTI by Onsemi is an Image Sensor with 4.5X4.5 um pixel size, 360 MHz master clock, and 4096x4096 resolution. It operates b/w -40 to 85 °C and has a dynamic range of 59 dB. Ideal for high-speed imaging applications requiring precise color reproduction and low-light performance.
NOIP1SN025KA-GTI
NOIP1SN025KA-GTI by Onsemi is a CMOS image sensor with 5120x5120 pixels, 4.5um pixel size, and 360MHz master clock. It operates b/w -40 to 85 °C and has a dynamic range of 59dB. Ideal for high-resolution imaging applications requiring fast frame rates up to 80fps.
NOIV1SE012KA-GTI
NOIV1SE012KA-GTI by Onsemi is an image sensor with 4.5X4.5 um pixel size, 340 MHz master clock, and 4096 horizontal pixels. It operates b/w -40 to 85 °C and has a dynamic range of 56 dB. Ideal for applications requiring high-speed imaging with precise detail capture in various environments.
IT ALSO OPERATES AT 3 TO 3.6 V SUPPLY VOLTAGE, GLOBAL SHUTTER, ROLLING SHUTTER
56 dB
110 fps
340 MHz
915 mA
CURRENT OUTPUT
2 V
1.6 V
NOIV1SE016KA-GTI
NOIV1SE016KA-GTI by Onsemi is an Image Sensor with 4.5X4.5 um pixel size, 340 MHz master clock, and 80 fps frame rate. Ideal for applications requiring high-resolution imaging in a compact form factor, such as surveillance cameras or industrial machine vision systems.
NOIV1SE025KA-GTI
NOIV1SE025KA-GTI by Onsemi is an Image Sensor with 4.5um Pixel Size, 310 MHz Master Clock, and 5120 Horizontal Pixels. Ideal for applications requiring high-resolution imaging such as surveillance cameras, industrial inspection systems, and medical imaging devices.
59.6 dB
53 fps
310 MHz
775 mA
1.37
NOIV1SN012KA-GTI
NOIV1SN012KA-GTI by Onsemi is an image sensor with 4.5x4.5 um pixel size, 340 MHz master clock, and 4096 horizontal pixels. It is used in applications requiring high-resolution imaging at a max operating temperature of 85 °C, offering a dynamic range of 56 dB and a frame rate of 110 fps.
NOIV1SN016KA-GTI
NOIV1SN016KA-GTI by Onsemi is an image sensor with 4.5X4.5 um pixel size, 340 MHz master clock, and 4096 horizontal pixels. It operates b/w -40 to 85 °C and has a dynamic range of 56 dB. Ideal for applications requiring high-resolution imaging at a max supply voltage of 2 V.
NOIV1SN025KA-GTI
NOIV1SN025KA-GTI by Onsemi is an image sensor with 4.5x4.5 um pixel size, 310 MHz master clock, and 5120 horizontal pixels. It operates b/w -40 to 85 °C and has a dynamic range of 59.6 dB. Ideal for applications requiring high-resolution imaging at a frame rate of 53 fps in a rectangular package shape with through-hole mounting feature.
KAI-29050-AAA-JP-B2
Onsemi's KAI-29050-AAA-JP-B2 is a 5.5x5.5 um CCD image sensor with 6576 (H) x 4384 (V) pixels, offering a dynamic range of 64 dB. It operates b/w -50 to 70 °C, with data rate of 40 Mbps and frame rate of 4 fps. Ideal for applications requiring high-resolution imaging in industrial and scientific fields.
IT HAS A SENSITIVITY OF 34 MICRO VOLT PER ELECTRON
40 Mbps
64 dB
4 fps
6576
4384
KAI-50140-AXA-JP-B1
KAI-50140-AXA-JP-B1 by Onsemi is an image sensor with 4.5x4.5 um pixel size, 60 MHz master clock, and 10440 horizontal pixels. It operates b/w -50 to 60 °C and has a dynamic range of 60 dB. Ideal for digital output applications requiring high-resolution imaging in various environments.
10440
GLASS
60 MHz
60 Cel
4800
KAI-50140-AXA-JP-B2
KAI-50140-AXA-JP-B2 by Onsemi is an image sensor with 4.5x4.5 um pixel size, 60 MHz master clock, and 10440 horizontal pixels. It operates b/w -50 to 60 °C and has a max supply voltage of 15.5 V. Ideal for digital output applications in various industries due to its high dynamic range and frame array type design.
MT9V127IA3XTC-DR1
MT9V127IA3XTC-DR1 by Onsemi is a 5.60x5.60 um CMOS image sensor with 680H x 512V pixels, offering a dynamic range of 74.6 dB and operating at temperatures from -30 to 70 °C. It features a digital current output interface, suitable for applications requiring a frame rate of up to 30 fps in surface mount configurations.
ELECTRONIC ROLLING SHUTTER, IT ALSO OPERATES AT ANALOG SUPPLY VOLTAGE 2.66-2.94 V
74.6 dB
30 fps
680
-30 Cel
DIGITAL CURRENT
5.60X5.60
512
AR0330SR1C00SUKA0-CP
The Onsemi AR0330SR1C00SUKA0-CP is a 2.2x2.2 um CMOS image sensor with 2304 horizontal pixels and 1536 vertical pixels. It operates b/w -30 to 70 °C, has a dynamic range of 69.5 dB, and outputs digital voltage from 0.40-1.40V. Ideal for applications requiring high-resolution imaging in varying light conditions such as surveillance cameras or industrial machine vision systems.
ELECTRONIC ROLLING SHUTTER, GLOBAL RESET RELEASE, IT ALSO OPERATES AT ANALOG SUPPLY VOLTAGE 2.76-2.9V
6.278 inch
.7 mm
6.648 mm
69.5 dB
2304
75 mA
0.40-1.40V
2.2X2.2
350-1150
1536
KAI-47052-AXA-JD-B1
KAI-47052-AXA-JD-B1 by Onsemi is an image sensor with 5.5x5.5 um pixel size, 40 MHz master clock, and 15.5V max supply voltage. Ideal for applications requiring high-resolution imaging in industrial cameras or machine vision systems due to its 8856 (H) x 5280 (V) pixel resolution and 66 dB dynamic range at temperatures ranging from -50 °C to 70°C.
44.45 inch
© 2023 All rights reserved
