Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Ceramic filters are electronic filters that are used in RF and microwave communication systems to selectively filter out unwanted frequencies from a signal. They are designed to provide a high level of selectivity and precision in filtering, making them ideal for use in applications where accurate frequency response is critical.Ceramic filters use a ceramic resonator to selectively filter out specific frequencies from a signal. The ceramic resonator is typically made of a piezoelectric material, such as barium titanate or lead zirconate titanate, and is designed to resonate at a specific frequency or range of frequencies.Ceramic filters can be designed as band-pass filters, which allow only a specific range of frequencies to pass through, or as band-stop filters, which block a specific range of frequencies. They can also be designed with multiple resonators, which can increase the level of selectivity and precision in filtering.Ceramic filters are commonly used in a variety of RF and microwave communication systems, including radios, satellite communication systems, and radar systems. They are also used in scientific research applications, such as particle accelerators and radio telescopes.
Add filters
All
Selected
CER0347B
Cts
Cts CER0347B is a Ceramic BPF filter with 2 terminals, 2350 MHz center frequency, and 2 dB insertion loss. Ideal for surface mount applications, it operates b/w -40°C to 85°C with silver terminal finish and can handle up to 2W input power.
REEL
2 W
2350 MHz
CERAMIC BPF
7.9 mm
2 dB
e4
10.2 mm
SURFACE MOUNT
2
85 Cel
-40 Cel
L10.2XB4.0XH7.9 (mm)/L0.402XB0.157XH0.311 (inch)
Silver (Ag)
CER0358B
Cts CER0358B is a Ceramic BPF filter with 1.7 dB max insertion loss, fo/fc at 1227 MHz, and 85°C max operating temp. Ideal for surface mount applications in electronics requiring high-frequency signal filtering within -40 to 85°C temperature range.
TAPE AND REEL
1 W
1227 MHz
4 mm
1.7 dB
10 mm
L10.0XB9.2XH4.0 (mm)/L0.394XB0.362XH0.157 (inch)
SFECF10M7FA00S0-R0
Murata Manufacturing
Murata Manufacturing's SFECF10M7FA00S0-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. It offers a max insertion loss of 3 dB at 10.7 MHz and an impedance of 330Ω. Ideal for surface mount applications in various electronic devices.
HIGH-RELIABILITY
10.7 MHz
1.3 mm
330 OHM
3 dB
3.45 mm
6
80 Cel
-20 Cel
L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch)
3.1
CER0357C
Cts CER0357C is a Ceramic BPF filter with 2 terminals, offering 22 dB attenuation at 1575 MHz. With a max insertion loss of 1.7 dB and operating temperature range from -40 to 85 °C, it's ideal for surface mount applications requiring high-frequency filtering.
100000 kHz
22 dB
1575 MHz
L10.0XB6.8XH4.0 (mm)/L0.394XB0.268XH0.157 (inch)
CER0398A
Cts CER0398A is a Ceramic BPF filter with 2 terminals, offering 33 dB attenuation at 2440 MHz. With a max insertion loss of 2 dB and operating temperatures from -40 to 85 °C, it's ideal for surface mount applications requiring up to 1 W input power.
160000 kHz
33 dB
2440 MHz
2.3 mm
6.8 mm
L6.8XB5.5XH2.3 (mm)/L0.268XB0.217XH0.091 (inch)
SFECS13M0SF0023-R0
Murata Manufacturing's SFECS13M0SF0023-R0 is a Ceramic BPF filter with 5 dB attenuation at 13 MHz. It has a max insertion loss of 6 dB and operates at an I/O impedance of 330Ω. Ideal for surface mount applications, it provides 250 kHz attenuation frequency for effective signal filtering.
2 ELEMENTS; CHIP TYPE; TAPE AND REEL
250 kHz
5 dB
13 MHz
6 dB
SFECV10M7JA00-R0
Murata's SFECV10M7JA00-R0 is a Ceramic BPF filter with 5.5 dB max insertion loss at 10.7 MHz. Featuring silver terminal finish, it has dimensions of L6.9xB2.9xH1.5 mm and an I/O impedance of 330Ω, ideal for surface mount applications in RF circuits.
2 ELEMENTS THICKNESS LONGITUDINAL VIBRATION; CHIP TYPE; TAPE AND REEL
1.5 mm
5.5 dB
6.9 mm
L6.9XB2.9XH1.5 (mm)
2.9
SFECV10M7KA00-R0
SFECV10M7KA00-R0 by Murata Manufacturing is a ceramic filter with 3 terminals. It has a max operating temperature of 80°C and a min operating temperature of -20°C. This surface mount filter has a center/cutoff frequency of 10.7 MHz and an insertion loss of 6 dB, making it suitable for various applications requiring precise filtering at high frequencies.
TR, EMBOSSED, 7 INCH
3
L6.9XB2.9XH1.5 (mm)/L0.272XB0.114XH0.059 (inch)
LFCN-1000
Mini-circuits
LFCN-1000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
600000 kHz
250000 kHz
30 dB
20 dB
10 W
1300 MHz
CERAMIC LPF
.94 mm
50 OHM
e0
3.2 mm
7
4
100 Cel
-55 Cel
L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch)
Tin/Lead (Sn10Pb90)
1.3
1.6
CDSCB10M7GA119-R0
Murata Manufacturing's CDSCB10M7GA119-R0 is a Ceramic BPF filter with 2 terminals, measuring L4.5xB2.0xH1.0 mm. It operates at 10.7 MHz and is ideal for surface mount applications in electronic devices requiring precise frequency filtering capabilities.
1 mm
4.5 mm
L4.5XB2.0XH1.0 (mm)/L0.177XB0.079XH0.039 (inch)
2.0
SFECF10M7EA00-R0
SFECF10M7EA00-R0 by Murata: Ceramic BPF filter with 3dB max insertion loss, 10.7 MHz center frequency, and 6 terminals. Ideal for surface mount applications in electronics for impedance of 330Ω at -20 to 80°C temperature range.
SFECF10M7FA00-R0
Murata's SFECF10M7FA00-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. It offers a center frequency of 10.7 MHz and max insertion loss of 3 dB. Ideal for surface mount applications with an impedance of 330Ω, it measures L3.45xB3.1xH1.3 mm and is suitable for various electronic devices requiring precise signal filtering.
SFECF10M7GA00-R0
Murata's SFECF10M7GA00-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. Featuring a center frequency of 10.7 MHz and max insertion loss of 3.5 dB, it's ideal for surface mount applications with an impedance of 330Ω.
3.5 dB
SFECF10M7HA00-R0
Murata's SFECF10M7HA00-R0 is a Ceramic BPF filter with 6 terminals, fo/fc of 10.7 MHz, and max insertion loss of 4 dB. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C with an impedance of 330Ω.
4 dB
B096QC2S
Knowles Precision Devices
B096QC2S by Knowles Precision Devices is a Ceramic BPF filter with 3dB max insertion loss, 10,000 MHz center frequency, and -55 to 125°C operating temperature range. Ideal for surface mount applications in need of a compact (4.57mm x 10.86mm x 2.54mm) ceramic filter with 50Ω impedance.
10000 MHz
2.54 mm
10.86 mm
1
125 Cel
4.57
LFL182G50TC1B905
Murata Manufacturing's LFL182G50TC1B905 is a Ceramic LPF filter with 0.8mm width, 1.6mm length, and 0.6mm height. It operates b/w -40°C to 85°C, has a max insertion loss of 0.43 dB at 2500 MHz, and an I/O impedance of 50 ohms. Ideal for surface mount applications requiring a VSWR of 2 and handling up to 3W average input power.
3 W
2500 MHz
.6 mm
.43 dB
1.6 mm
TR, PAPER, 7 INCH
0.8
LFL183G55TC2B908
Murata Manufacturing's LFL183G55TC2B908 is a Ceramic LPF filter with 0.8mm width, 1.6mm length, and 0.6mm height. It operates b/w -40 to 85°C, has a max insertion loss of 0.55 dB at 3550 MHz, and VSWR of 1.9 for applications in surface mount configurations requiring a 50Ω impedance.
3550 MHz
.55 dB
1.9
TSB1N18D2G00LV0H7T
Taiyo Yuden
TSB1N18D2G00LV0H7T by Taiyo Yuden is a Ceramic BPF filter with 1.8 dB max insertion loss, 2002.5 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in temperature range -40 to 85 °C, commonly used in RF communication systems.
2002.5 MHz
.65 mm
1.8 dB
TAPE, PAPER
SFSKA5M50CF00-R3
Murata Manufacturing's SFSKA5M50CF00-R3 is a Ceramic BPF filter with 5.5 MHz center frequency, 6 dB insertion loss, and -20 to 80°C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter solution.
5.5 MHz
1.8 mm
600 OHM
8.5 mm
TR, EMBOSSED, 13 INCH
3.8
LFL182G45TC3B746
LFL182G45TC3B746 by Murata Manufacturing is a ceramic LPF filter with a center frequency of 2450 MHz. It has a max insertion loss of 0.7 dB and can handle an average input power of 3 W. This filter is commonly used in applications requiring high-frequency signal filtering, such as wireless communication systems.
2450 MHz
.7 mm
.7 dB
e3
Tin (Sn)
1.7
L185XF4S
The Knowles Precision Devices L185XF4S is a Ceramic LPF filter with a center frequency of 18.5 GHz and max insertion loss of 2.2 dB. Operating b/w -55°C to 125°C, it has an impedance of 50Ω and VSWR of 1.4, making it ideal for panel mount applications in RF systems.
18500 MHz
2.49 mm
2.2 dB
5.58 mm
PANEL MOUNT
1.4
3.56
RFLPF1608060A07B1U
Walsin Technology
RFLPF1608060A07B1U by Walsin Technology is a Ceramic LPF filter with 2450 MHz center frequency, 0.65 dB insertion loss, and 1.5 VSWR. Ideal for surface mount applications in the 50 OHM impedance range, it operates b/w -40 to 85 °C temperatures.
.65 dB
TR, 7 INCH
1.5
FI168B5538FW-T
FI168B5538FW-T by Taiyo Yuden is a ceramic BPF filter with a center frequency of 5537.5 MHz and max insertion loss of 1.2 dB. It operates in temperatures ranging from -40 to 85 °C and is suitable for surface mount applications requiring a 50 OHM impedance.
5537.5 MHz
1.2 dB
B168MB1S
B168MB1S by Knowles Precision Devices is a Ceramic BPF filter with 2.75 dB max insertion loss, operating from -55 to 125°C. With a center frequency of 16750 MHz, it has a compact size of 8.89mm x 5.08mm x 2.489mm for surface mount applications in RF systems requiring a 50Ω impedance.
16750 MHz
2.489 mm
2.75 dB
8.89 mm
5.08
ECS-DCF-105
Ecs International
ECS-DCF-105 by Ecs International is a Ceramic Filter with DIELECTRIC BPF type. It operates b/w -40 to 85°C, has 4.5 dB Max Insertion Loss at 6525 MHz, and handles up to 1W Average Input Power. Ideal for applications requiring a compact surface mount filter with 50Ω impedance.
6525 MHz
DIELECTRIC BPF
4.2 mm
4.5 dB
12.8 mm
TR, 13 INCH
4.4
ECS-DCF-108
ECS-DCF-108 by Ecs International is a Ceramic Filter with DIELECTRIC BPF type. It operates b/w -40 to 85 °C, has 4 dB Max Insertion Loss at 6525 MHz. With dimensions of 4.6mm x 9.4mm x 3mm, it's ideal for applications requiring a compact surface mount filter with an I/O Impedance of 50 OHM and handling up to 1W input power.
3 mm
9.4 mm
4.6
© 2023 All rights reserved
