Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.
Add filters
All
Selected
20ESB1
TE Connectivity
The TE Connectivity 20ESB1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at 0.3 MHz and up to 40 dB at 30 MHz. With a rated voltage of 250V and rated current of 20A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
UL; CSA; VDE
SINGLE PHASE EMI FILTER
30 MHz
.3 MHz
33.27 mm
2250 V
40 dB
3 dB
.75 mA
74.625 mm
PANEL MOUNT
50/60Hz
40 Cel
-10 Cel
L74.625XB52.58XH33.27 (mm)/L2.938XB2.07XH1.31 (inch)
20 A
250 V
52.58
05DRCW5
Delta Electronics
The Delta Electronics 05DRCW5 is a UL, CSA, and VDE approved EMI mains filter with a rated voltage of 250V. Featuring single-phase filtering, it operates at 50/60Hz frequency and offers high pot up to 2250V. Ideal for panel mounting applications, its compact dimensions are L65.5xB51.8xH29.2mm (L2.579xB2.039xH1.15 inch).
29.2 mm
.45 mA
65.5 mm
L65.5XB51.8XH29.2 (mm)/L2.579XB2.039XH1.15 (inch)
51.8
30DKCS5B
30DKCS5B by Delta Electronics is a single-phase EMI filter with a rated voltage of 250V and a max leakage current of 2mA. It is UL, CSA, and VDE approved and has a rated current of 30A. This panel mount filter is suitable for applications requiring EMI mains filtering.
46.4 mm
2 mA
95 mm
L95.0XB56.5XH46.4 (mm)/L3.74XB2.224XH1.827 (inch)
30 A
56.5
10DBAG5
The Delta Electronics 10DBAG5 is a SINGLE PHASE EMI FILTER with UL, CSA, VDE approvals. It offers 20 dB insertion loss at 0.15-30 MHz frequencies and rated for 250V/10A applications. Ideal for PANEL MOUNT installations in equipment requiring EMI mains filtering.
.15 MHz
29.97 mm
45 dB
20 dB
64.52 mm
L64.52XB44.96XH29.97 (mm)/L2.54XB1.77XH1.18 (inch)
10 A
744834405
Wurth Elektronik
Wurth Elektronik 744834405 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 4A. Operating temperature ranges from -40 to 125°C. It is designed for through-hole mounting applications to reduce electromagnetic interference in electronic circuits.
22 mm
32.5 mm
THROUGH HOLE MOUNT
4
50Hz
125 Cel
-40 Cel
L32.5XB28.0XH22.0 (mm)/L1.28XB1.102XH0.866 (inch)
4 A
Tin (Sn) over Copper (Cu)
28.0
744834407
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
3.5 A
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
5 A
EAC-10-102-D
Cosel
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
UL; CSA; VDE; ENEC-10
30 mm
2500 V
.25 mA
85 mm
DIN RAIL MOUNT
60Hz
85 Cel
L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch)
39.0
EAC-10-102
EAC-10-102 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 10A, it is suitable for chassis mount applications requiring effective filtering at 60Hz.
CHASSIS MOUNT
EAC-10-472
Cosel EAC-10-472 is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI filter with 250V rated voltage and 10A rated current. It operates b/w -40°C to 85°C, has a high pot of 2500V, and max leakage current of 1mA. Ideal for chassis mount applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
1 mA
ESP-03-221-D
The Cosel ESP-03-221-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. With a max operating temperature of 85°C and high pot of 2500V, it's ideal for DIN rail mounting in applications requiring efficient EMI mains filtering.
.05 mA
ESP
3 A
ESP-03-221
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
ESP-03-222-D
The Cosel ESP-03-222-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI mains filter with 250V rated voltage and 3A rated current. It operates b/w -40°C to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
.5 mA
ESP-03-222
Cosel ESP-03-222 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
NAC-04-472-D
The Cosel NAC-04-472-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 4A. Operating at temperatures from -40 to 85°C, it offers high pot protection up to 2500V and DIN rail mounting. Ideal for applications requiring effective EMI filtering in compact spaces.
41 mm
92 mm
L92.0XB53.0XH41.0 (mm)/L3.622XB2.087XH1.614 (inch)
53.0
NAC-06-472-D
The Cosel NAC-06-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 6A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it is ideal for DIN rail mounting applications requiring high pot of 2500V and max leakage current of 1mA at temperatures ranging from -40 to 85°C.
6 A
NAC-10-102-D
Cosel NAC-10-102-D is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 10A rated current. It operates b/w -40°C to 85°C, offering single-phase filtering at 60Hz frequency. Ideal for DIN rail mounting applications due to compact dimensions of L92.0xB53.0xH41.0mm.
NAC-10-102
NAC-10-102 by Cosel is a UL, CSA, and VDE approved SINGLE PHASE EMI filter with a rated voltage of 250V. It operates at temperatures ranging from -40 to 85 °C and has a max leakage current of 0.25 mA. This chassis mount filter is suitable for applications requiring up to 10A of rated current.
NAC-16-472-D
The Cosel NAC-16-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI mains filter with 250V rated voltage and 16A rated current. It operates at temperatures from -40 to 85°C and features high pot of 2500V. Ideal for DIN rail mounting in applications requiring effective EMI filtering at 60Hz frequency.
16 A
NAC-20-472-D
The Cosel NAC-20-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0mm, it operates b/w -40°C to 85°C making it ideal for DIN rail mounting in various applications requiring efficient EMI mains filtering at 60Hz frequency.
NAC-20-472
The Cosel NAC-20-472 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it is ideal for chassis mount applications requiring high pot of 2500V and max leakage current of 1mA at temperatures ranging from -40 to 85°C.
NAH-10-472
The Cosel NAH-10-472 is a single-phase EMI filter with 250V rated voltage and 10A rated current. It has approvals from UL, CSA, VDE, and ENEC-10 for quality assurance. Ideal for chassis mount applications in electronics to reduce electromagnetic interference at operating temperatures ranging from -40°C to 85°C.
NAH-20-222
The Cosel NAH-20-222 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it's ideal for chassis mount applications requiring high pot of 2500V and operating temperatures from -40 to 85 °C.
NAH-20-472
NAH-20-472 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and dimensions of L92.0XB53.0XH41.0 (mm), it is suitable for chassis mount applications requiring up to 20A current capacity.
NBC-10-472-D
The Cosel NBC-10-472-D EMI Mains Filter is a single-phase filter with UL, CSA, VDE, and ENEC-10 approvals. It has a rated voltage of 250V, rated current of 10A, and operates b/w -40°C to 85°C. Ideal for DIN rail mounting applications due to its compact dimensions of L92.0xB53.0xH41.0mm.
NBC-20-472-D
Cosel NBC-20-472-D is a 250V UL/CSA/VDE/ENEC-10 approved EMI mains filter with 20A rated current. It operates b/w -40°C to 85°C, offers high pot of 2500V, and has max leakage current of 1mA. Ideal for single-phase applications, it's DIN rail mountable with dimensions of L92.0xB53.0xH41.0mm.
NBH-30-681-D
The Cosel NBH-30-681-D is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 30A, it is suitable for DIN rail mounting in various applications requiring effective EMI filtering.
43 mm
.15 mA
104 mm
NBH
L104.0XB53.0XH43.0 (mm)/L4.094XB2.087XH1.693 (inch)
NBH-30-681
The Cosel NBH-30-681 is a single-phase EMI filter with 250V rated voltage and 30A rated current. It has UL, CSA, VDE, and ENEC-10 approvals, operating at temperatures from -40 to 85°C. Ideal for chassis mount applications requiring high pot of 2500V and max leakage current of 0.15mA.
7448227005
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
18.5 mm
L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch)
6.5 A
14.5
1-6609032-3
TE Connectivity's 1-6609032-3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 10A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
1/4 INCH QUICK CONNECT TERMINAL
10 MHz
38.9 mm
1450 V
65 dB
5 dB
.4 mA
97.8 mm
L97.8XB52.6XH38.9 (mm)/L3.85XB2.071XH1.531 (inch)
52.6
FMCC-H93A-J532
Schurter Ag
Schurter Ag's FMCC-H93A-J532 is a 3-phase EMI filter with 520V rated voltage, 150A current, and -40 to 100°C operating range. It has IEC and UL approvals, suitable for panel mounting in applications requiring high-potential protection and low leakage current up to 14.1mA at 50/60Hz frequency.
IEC; UL
THREE PHASE EMI FILTER
120 mm
2150 V
14.1 mA
300 mm
100 Cel
150 A
520 V
160
FMCC-H93B-K532
The Schurter Ag FMCC-H93B-K532 is a 3-phase EMI filter with a rated voltage of 520V and rated current of 250A. It operates at temperatures from -40°C to 100°C, with high pot up to 2150V. Ideal for panel mounting applications requiring efficient filtering in industrial settings.
125 mm
250 A
180
FMCC-I93B-K534
Schurter Ag's FMCC-I93B-K534 is a 760V rated THREE PHASE EMI FILTER with approvals from IEC and UL. With a max operating temperature of 100°C, it offers a high pot of 3000V and rated current of 250A. Ideal for panel mount applications in industries requiring efficient EMI mains filtering at frequencies of 50/60Hz.
3000 V
13.5 mA
760 V
SCR-050-0R9A070JH
KEMET Corporation
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Dimensions: L29.0XB23.0XH27.0 (mm)/L1.142XB0.906XH1.063 (inch); Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Length: 29 mm;
INDUCTANCE 7 MILLI HENRY
27 mm
100 Mohm
29 mm
50 Cel
-25 Cel
L29.0XB23.0XH27.0 (mm)/L1.142XB0.906XH1.063 (inch)
23.0
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
.73 mA
TF0804S-01
TDK
TDK TF0804S-01 is a 1A, 50V single-phase EMI mains filter with -20 to 105°C operating range. Its compact D10.0xH6.0mm size makes it ideal for through-hole mounting applications in various electronic devices requiring effective EMI filtering.
INDUCTANCE 3 MICRO HENRY
10
6 mm
105 Cel
-20 Cel
D10.0XH6.0 (mm)/D0.394XH0.236 (inch)
1 A
50 V
RD8147-16-3M0
Schaffner Holding Ag
DATA LINE FILTER;
DATA LINE FILTER
RD8147-50-0M3
7448030333
Wurth Elektronik 7448030333 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 2.5A rated current. It operates b/w -40 to 125 °C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering at 50Hz frequency.
ENEC-10; VDE
25 mm
TRAY
2.5 A
13.5
7448030417
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
7448031002
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
23 mm
17
7448040435
Wurth Elektronik 7448040435 is a single-phase EMI mains filter with approvals from ENEC-10 and VDE. It has a rated voltage of 250V, rated current of 3.5A, and operates b/w -40°C to 125°C. Ideal for through-hole mounting applications in electronics to reduce electromagnetic interference at 50Hz frequency.
32 mm
e2
28 mm
TIN COPPER
19
7448041801
Wurth Elektronik 7448041801 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 18A rated current, and -40 to 125°C operating temperature range. Ideal for EMI mains filtering applications due to its compact size (19mm x 30mm x 28mm) and through-hole mounting design.
CARTON; TRAY
18 A
7448042001
Wurth Elektronik 7448042001 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -40 to 125 °C, has high pot of 1500V, and dimensions of L30.0xB19.0xH28.0 mm. Ideal for EMI mains filtering in various applications due to its through-hole mounting type and compact size.
1500 V
CARTON
L30.0XB19.0XH28.0 (mm)/L1.181XB0.748XH1.102 (inch)
19.0
7448050219
Wurth Elektronik 7448050219 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 2A rated current. It operates b/w -40°C to 125°C, approved by ENEC-10 and VDE for applications requiring EMI mains filtering in through-hole mounting setups.
39 mm
33 mm
2 A
7448051012
Wurth Elektronik 7448051012 is a single-phase EMI filter with 250V rated voltage and 10A current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125°C, and dimensions of 23mm width, 34mm length, and 33mm height. Ideal for applications requiring EMI mains filtering in electronics.
34 mm
23
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
36 mm
7448053201
Wurth Elektronik 7448053201 is a single-phase EMI filter with a rated voltage of 250V and current of 32A. It operates b/w -40°C to 125°C, suitable for applications requiring ENEC-10 and VDE approvals. With dimensions of 23mm x 37mm x 34mm, it is designed for through-hole mounting in various electronic devices.
37 mm
32 A
© 2023 All rights reserved
