Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.
Add filters
All
Selected
FN3280H-16-29
Schaffner Holding Ag
The Schaffner Holding Ag FN3280H-16-29 is a 3-phase EMI mains filter with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 520V, max operating temperature of 100°C, and high pot of 2250V. This panel mount filter is ideal for applications requiring effective EMI filtering in industrial settings.
UL; CSA; ENEC-14
THREE PHASE EMI FILTER
80 mm
2250 V
1 mA
120 mm
PANEL MOUNT
60Hz
100 Cel
-25 Cel
L120.0XB115.0XH80.0 (mm)/L4.724XB4.528XH3.15 (inch)
16 A
520 V
115.0
FN3258-130-35
The Schaffner Holding Ag FN3258-130-35 is a UL, CSA, ENEC-14 approved 480V three-phase EMI mains filter with a rated current of 130A. It operates b/w -25°C to 100°C and has a high pot of 2650V. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
TERMINAL BLOCK CONNECTIONS
150 mm
2650 V
33 mA
240 mm
L240.0XB90.0XH150.0 (mm)/L9.449XB3.543XH5.906 (inch)
130 A
480 V
90.0
FN3258-30-33
The Schaffner Holding Ag FN3258-30-33 is a 480V UL/CSA/ENEC-14 approved EMI mains filter with a rated current of 30A. It operates at temperatures from -25°C to 100°C and has a max leakage current of 33mA. This three-phase filter, measuring L240.0xB50.0xH85.0 mm, is ideal for panel mounting applications in industrial settings.
85 mm
L240.0XB50.0XH85.0 (mm)/L9.449XB1.969XH3.346 (inch)
30 A
50.0
FN3258-42-33
Schaffner Holding Ag's FN3258-42-33 EMI Mains Filter is a UL, CSA, and ENEC-14 approved three-phase filter with 480V rated voltage and 42A current. With a compact size of L280.0xB50.0xH85.0 mm, it operates b/w -25°C to 100°C making it ideal for panel mounting applications requiring high pot of 2650V and max leakage current of 33mA at 60Hz frequency.
280 mm
L280.0XB50.0XH85.0 (mm)/L11.024XB1.969XH3.346 (inch)
42 A
FN355-10-05
Schaffner Holding Ag's FN355-10-05 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, UL, CSA, SEMKO approvals. It operates at -25 to 100 °C and has a high pot of 1900V. With dimensions of L65.0XB50.0XH40.3 (mm), it is ideal for PANEL MOUNT applications in systems requiring up to 11.5A current handling capacity at 400Hz frequency.
AMP FAST-ON CONNECTIONS
UL; CSA; SEMKO
40.3 mm
1900 V
.07 mA
65 mm
400Hz
L65.0XB50.0XH40.3 (mm)/L2.559XB1.969XH1.587 (inch)
11.5 A
440 V
FN356-16-06
Schaffner Holding Ag's FN356-16-06 EMI Mains Filter is a 3-phase filter with UL, CSA, and ENEC-14 approvals. It operates at 440V with a rated current of 18.4A, suitable for applications requiring high voltage filtering in industrial settings. With dimensions of L149.0xB104.0xH50.0 mm, it offers efficient EMI suppression at temperatures ranging from -25°C to 100°C.
SOLDER-LUG/FAST-ON COMBINATION CONNECTIONS
50 mm
.43 mA
149 mm
L149.0XB104.0XH50.0 (mm)/L5.866XB4.094XH1.969 (inch)
18.4 A
104.0
FN256-64-52
The Schaffner Holding Ag FN256-64-52 is a UL, CSA, ENEC-14 approved 480V three-phase EMI mains filter with a rated current of 64A. It operates at temperatures from -25°C to 100°C and has a high pot of 2650V. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
125 mm
3.4 mA
140 mm
FN256
L140.0XB125.0XH125.0 (mm)/L5.512XB4.921XH4.921 (inch)
64 A
FMBC-A91G-J310
Schurter Ag
Schurter Ag's FMBC-A91G-J310 is a UL, CUL, VDE approved EMI mains filter with 480V rated voltage. It offers 130A rated current and operates at -25 to 100°C. Ideal for three-phase applications, it has a compact size of L240.0xB90.0xH150.0mm for panel mounting in industrial settings.
INDUCTANCE 0.7 MILLIHENRY
UL; CUL; VDE; IEC; ENEC-10
50/60Hz
20SRB1
TE Connectivity
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Minimum Operating Temperature: -10 Cel; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel;
SINGLE PHASE EMI FILTER
40 Cel
-10 Cel
20 A
2-6609037-5
TE Connectivity's 2-6609037-5 EMI Mains Filter offers UL, CSA, VDE approvals. It provides 15 dB insertion loss at 0.01 MHz and 75 dB at 5 MHz. With a rated voltage of 120V, it is ideal for single-phase EMI filtering applications in panels with a max operating temperature of 40°C and high pot of 2250V.
UL; CSA; VDE
5 MHz
.01 MHz
39.6 mm
75 dB
15 dB
.21 mA
109.98 mm
L109.98XB52.6XH39.6 (mm)/L4.33XB2.071XH1.559 (inch)
7 A
120 V
2794123
Phoenix Contact
Phoenix Contact 2794123 is a UL, IEC, VDE approved EMI Mains Filter with 250V rated voltage and 1A rated current. Its single-phase filter type operates b/w -25°C to 100°C, suitable for DIN rail mounting applications. Dimensions: L79.4xB25.0xH90.3 mm (L3.126xB0.984xH3.555 inch).
UL; IEC; VDE
90.3 mm
79.4 mm
DIN RAIL MOUNT
L79.4XB25.0XH90.3 (mm)/L3.126XB0.984XH3.555 (inch)
1 A
250 V
25.0
16BCF10
TE Connectivity's 16BCF10 EMI Mains Filter is a THREE PHASE filter with UL and VDE approvals, rated for 277V and 16A. With a max operating temperature of 50°C and min of -10°C, it is ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
UL; VDE
70 mm
30 mA
220 mm
50 Cel
277 V
45
DKIH-3237-12D7
Schurter Ag's DKIH-3237-12D7 EMI Mains Filter is CSA, ENEC-10, IEC, UL, VDE approved with 425V rated voltage and 12A rated current. With a diameter of 37mm and height of 26mm, it operates b/w -40°C to 100°C for single-phase applications up to 400Hz frequency.
CSA; ENEC-10; IEC; UL; VDE
37
26 mm
2500 V
THROUGH HOLE MOUNT
0-400
-40 Cel
12 A
425 V
RN122-4-02-1M8
RN122-4-02-1M8 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L28.0xB27.0xH16.5 mm, it's mounted through hole for effective electromagnetic interference suppression.
UL; IEC; VDE; ENEC-10
16.5 mm
28 mm
L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch)
4 A
300 V
27.0
RN212-2-02-1M0
Schaffner Holding Ag's RN212-2-02-1M0 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with 300V rating. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz. With dimensions of L18.0xB12.5xH20.0 mm, it offers a rated current of 2A for through-hole mounting setups.
20 mm
18 mm
L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch)
2 A
12.5
RN212-2-02-1M8
Schaffner Holding Ag's RN212-2-02-1M8 EMI Mains Filter has approvals from UL, IEC, VDE, and ENEC-10. With a rated voltage of 300V and rated current of 2A, it operates b/w -40°C to 100°C. This single-phase filter is designed for applications requiring effective electromagnetic interference suppression.
DKIH-3237-1010-NK
DKIH-3237-1010-NK by Schurter Ag is a single-phase EMI filter with a rated voltage of 425V. It operates at temperatures ranging from -40°C to 100°C and has a max operating frequency of 400Hz. This through-hole mount filter is suitable for applications requiring high pot resistance and a rated current of 10A.
10 A
DKIH-3358-326K-NK
Schurter Ag's DKIH-3358-326K-NK is a 3-phase EMI filter with 600V voltage rating, 32A current, and -40 to 100°C operating temperature range. Ideal for applications requiring high-potential protection and filtering in industrial settings.
IEC; UL
58
31 mm
3740 V
0-400Hz
32 A
600 V
DKIH-3358-50D7-NK
DKIH-3358-50D7-NK by Schurter Ag is a 600V rated THREE PHASE EMI FILTER with approvals from IEC and UL. It operates b/w -40°C to 100°C, has a high pot of 3740V, and a rated current of 50A. Ideal for applications requiring EMI mains filtering in industrial settings.
50 A
RP400150-10-S
Astrodyne Tdi
THREE PHASE EMI FILTER; Rated Current: 150 A; Maximum Leakage Current: .1 mA; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Width (mm): 168;
EN; UL
114 mm
3500 V
.1 mA
254 mm
RP400
50-60Hz
150 A
168
RP400150-100-S
RP400150-100-S by Astrodyne Tdi is a 480V three-phase EMI filter with 150A rated current. It has approvals from EN and UL, operates at -25 to 100°C, and offers high pot of 3500V. Ideal for panel mounting applications requiring effective filtering in the frequency range of 50-60Hz.
RP400150-1000-S
Astrodyne Tdi's RP400150-1000-S is a 480V three-phase EMI filter with 150A rated current. It operates at -25 to 100°C, approved by EN and UL standards. Ideal for panel mounting applications, it offers high pot of 3500V and max leakage current of 10mA.
10 mA
RP400200-100-S
RP400200-100-S by Astrodyne Tdi is a 480V THREE PHASE EMI FILTER with 200A rated current. It has approvals from EN and UL, operates at -25 to 100 °C, and offers high pot of 3500V. Ideal for panel mount applications requiring efficient filtering in industrial settings.
330 mm
200 A
RP400300-100-S
Astrodyne Tdi's RP400300-100-S is a 480V THREE PHASE EMI FILTER with 300A rated current. It operates at -25 to 100°C, has high pot of 3500V, and max leakage current of 1mA. Ideal for EMI mains filtering applications, it is EN and UL approved, panel mountable, and suitable for 50-60Hz frequency range.
300 A
RP40045-2000-S
RP40045-2000-S by Astrodyne Tdi is a 480V THREE PHASE EMI FILTER with 45A rated current. It has approvals from EN and UL, operates at -25 to 100 °C, and offers high pot of 3500V. Ideal for panel mount applications in industries requiring efficient EMI mains filtering.
83 mm
20 mA
178 mm
45 A
102
RP135-20-10-QD
RP135-20-10-QD by Astrodyne Tdi is a 250V single-phase EMI filter with CSA, EN, and UL approvals. It operates at -25 to 100°C, has a rated current of 10A, and offers high pot protection up to 2700V. Ideal for chassis mounting applications requiring effective filtering in the 50-60Hz frequency range.
CSA; EN; UL
17 mm
2700 V
1.8 mA
44 mm
RP135
CHASSIS MOUNT
44
RP357-600-1000-B
Astrodyne Tdi's RP357-600-1000-B is a 3-phase EMI filter with 600V rated voltage and 600A rated current. It operates b/w -25°C to 100°C, approved by EN and UL standards. Ideal for panel mounting applications requiring high pot of 3800V and max leakage current of 10mA at an operating frequency of 50-60Hz.
135 mm
3800 V
300 mm
RP357
600 A
210
RPM7200-10-S
RPM7200-10-S by Astrodyne Tdi is a single-phase EMI filter with a rated voltage of 300V and a max operating temperature of 70°C. It is panel mountable and has dimensions of L4.5XB2.5XH2.0 (mm)/L0.177XB0.098XH0.079 (inch). This filter is suitable for applications requiring EMI mains filtering at 50/60/400Hz frequencies, with a rated current of 10A and high pot rating of 1800V.
2 mm
1800 V
4.5 mm
50/60/400Hz
70 Cel
L4.5XB2.5XH2.0 (mm)/L0.177XB0.098XH0.079 (inch)
2.5
FN2010M-20-06
FN2010M-20-06 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 100°C. It has approvals from EN, IEC, CSA, and UL. This panel mount filter is suitable for applications requiring up to 20A of rated current and operates at an operating frequency of 400Hz.
EN;IEC;CSA;UL
30.3 mm
3.69 mA
400
54
1000APS12L
TE Connectivity's 1000APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting applications, this filter offers high pot protection up to 2200V and max leakage current of 270mA.
UL
142 mm
2200 V
270 mA
1000 A
200
1000APS12P
TE Connectivity's 1000APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. This three-phase filter has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting, it ensures efficient filtering in industrial applications.
2640 V
390 mA
690 V
1600APS12L
TE Connectivity's 1600APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 1600A. With a max operating temperature of 50°C, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
175 mm
350 mm
1600 A
1600APS12P
TE Connectivity's 1600APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. It features a three-phase filter type, rated current of 1600A, and high pot of 2640V. Ideal for panel mount applications, it operates b/w -10°C to 50°C and has dimensions of 210mm x 350mm x 175mm.
250APH12P
The TE Connectivity 250APH12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 330mA. Ideal for panel mounting applications, it measures 160mm in width, 250mm in length, and stands at a height of 125mm.
330 mA
250 mm
250 A
160
250APS12P
The TE Connectivity 250APS12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 390mA. Ideal for panel mounting applications, it measures 160mm in width, 208mm in length, and stands at a height of 123mm.
123 mm
208 mm
400APH12L
TE Connectivity's 400APH12L is a UL-approved EMI mains filter with a rated voltage of 520V. It features a three-phase filter type, rated current of 400A, and high pot of 2200V. Ideal for panel mount applications, it operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
115 mm
222 mA
400 A
400APS12L
TE Connectivity's 400APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and max operating temperature of 50°C. With a rated current of 400A, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
245 mm
205
400APS12P
TE Connectivity's 400APS12P is a UL-approved THREE PHASE EMI FILTER with 690V rated voltage and 400A rated current. With a wide operating temperature range (-10 to 50 °C), it is ideal for panel mount applications requiring high pot (2640V) and low leakage current (390mA).
600APS12L
TE Connectivity's 600APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a high pot of 2200V and max leakage current of 270mA. Ideal for panel mounting applications, this filter operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
600APS12P
TE Connectivity's 600APS12P EMI Mains Filter is a UL approved three-phase filter with a rated voltage of 690V and current of 600A. With a wide operating temperature range (-10 to 50°C) and high pot rating (2640V), it is ideal for panel mount applications requiring effective EMI filtering at 50-60Hz frequencies.
FN3288HV-80-34-C36-R65
Schaffner's FN3288HV-80-34-C36-R65 is a 3-phase EMI filter with 305V rated voltage, 34A current, and 2650V high pot. It operates b/w -40°C to 100°C, has approvals from IEC and UL, and offers max leakage current of 12.4mA. Ideal for panel mounting applications requiring efficient mains filtering at a frequency of 60Hz.
1 Mohm
12.4 mA
270 mm
34 A
305 V
95
FN3288HVIT-100-35-C43-R60
Schaffner Holding Ag's FN3288HVIT-100-35-C43-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and -40 to 100°C operating temperature range. It has approvals from IEC and UL for applications requiring high insulation resistance, such as industrial machinery and power distribution systems.
230 mm
3530 V
100 A
FN3288IT-100-35-C34-R60
Schaffner Holding Ag's FN3288IT-100-35-C34-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and 1 Mohm insulation resistance. It operates b/w -40°C to 100°C, approved by IEC and UL for applications requiring high pot of 2900V and low leakage current of 7mA.
2900 V
7 mA
FHSAA10A1FR
XP Power
XP Power's FHSAA10A1FR is a 250V single-phase EMI filter with 10A rated current. It operates b/w -40°C to 110°C, approved by EN and UL standards. Ideal for chassis mount applications requiring effective filtering at 400Hz frequency.
17.5 mm
.6 mA
110 Cel
24
FN3288HVIT-100-35-C26-R60
Schaffner Holding Ag's FN3288HVIT-100-35-C26-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and -40 to 100°C operating temperature range. It has approvals from IEC and UL, high pot of 3530V, and max leakage current of 2.6mA. Ideal for panel mounting applications requiring effective mains filtering at 60Hz frequency.
2.6 mA
SC-030-E150JH-P
KEMET Corporation
KEMET Corporation's SC-030-E150JH-P is a UL approved EMI mains filter with 250V rated voltage, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and has a diameter of 31mm.
31
14.5 mm
500 V
100 Mohm
120 Cel
TRAY
3 A
SC-05-100J
KEMET Corporation's SC-05-100J is a UL-approved EMI mains filter with 100 Mohm insulation resistance, 250V rated voltage, and 5A current. This single-phase filter operates b/w -25°C to 120°C and has a high pot of 500V. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression in compact spaces.
33 mm
34 mm
5 A
23
SC-07-30JM
KEMET Corporation's SC-07-30JM is a UL-approved EMI mains filter with 100 Mohm insulation resistance, 250V rated voltage, and 7A current. This single-phase filter operates b/w -25°C to 120°C and has a high pot of 500V. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression in compact spaces.
© 2023 All rights reserved
