Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's RN212-2-02-1M0 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with 300V rating. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz. With dimensions of L18.0xB12.5xH20.0 mm, it offers a rated current of 2A for through-hole mounting setups.
Median Price
$1.980
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.290
1k+ parts
$1.150
10k+ parts
$1.080
DigiKey
$2.040
$1.377
$1.133
$1.048
TE Connectivity
$3.740
-
Farnell
$1.230
Chip1Stop
$1.240
Nova Conductors
$1.030
Vyrian
IBS Electronics
$0.957
NAC Semi
$1.380
Advanced Electronics
$0.490
$0.446
$0.402
Netroflash
Glotronic Ltd.
Having multiple approvals ensures that the product meets high safety and quality standards, making it a reliable choice for applications.
With a high rated voltage, this EMI mains filter can handle a wide range of voltage inputs, providing versatility in usage.
The single-phase EMI filter design helps in effectively reducing electromagnetic interference, ensuring better performance of connected devices.
The high maximum operating temperature allows the filter to function in demanding environments without risk of overheating or failure.
The low minimum operating temperature means this EMI filter can also be used in cold environments without any operational issues.
The compact width makes this filter suitable for applications where space is limited, enabling easy installation even in tight spaces.
The ability to operate at common frequencies ensures compatibility with a wide range of electrical systems and appliances.
The moderate length of the filter allows for a balanced design that can fit well into different setups while maintaining efficient filtering capabilities.
The through-hole mounting type offers a secure and reliable way to install the filter on circuit boards, ensuring stability and durability.
The compact dimensions make this filter suitable for integration into various electronic devices without taking up too much space.
With a rated current of 2 A, this filter is capable of handling moderate electrical loads while effectively reducing EMI, making it a versatile choice.
The optimal height of the filter allows for efficient filtering without compromising on the overall size of the product, ensuring effective EMI suppression.
EMI Mains Filters RN212-2-02-1M0 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1554216002
Molex
WIRE AND CABLE;
Daco Semiconductor
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Changzhou Starsea Electronics
1N4148
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
RSEN-2010D
TDK
The TDK RSEN-2010D is a single-phase EMI filter with 250V rated voltage and 10A rated current. It offers approvals from UL, CSA, EN and operates b/w -25°C to 85°C. With dimensions of L98.0xB52.0xH43.5 (mm), it is ideal for panel mount applications requiring high insulation resistance and low leakage current.
1-6609037-4
TE Connectivity's 1-6609037-4 is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 40°C. With dimensions of L93.73XB57.66XH45.72 (mm), it is panel mountable and suitable for applications requiring a rated current of 15A.
SSHB21HS-15064
KEMET Corporation
KEMET Corporation's SSHB21HS-15064 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25°C to 130°C. It is UL approved and designed for single-phase applications requiring a rated current of 1.5A.
RTEN-2020
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: PANEL MOUNT; Maximum Leakage Current: 1 mA; Minimum Insulation Resistance: 100 Mohm; Height: 42 mm;
RN212-1.5-02
Schaffner Holding Ag
Schaffner Holding Ag's RN212-1.5-02 EMI Mains Filter is UL and VDE approved, rated for 250V with a 1.5A current. With a single-phase filter type, it operates b/w -40°C to 125°C, suitable for through-hole mounting in applications requiring effective electromagnetic interference suppression at 50/60Hz frequencies.
810913010112
Wuerth Elektronik & Kg
Wurth Elektronik 810913010112 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A rated current. It operates at -25 to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
SSHB10HS-R17046
KEMET Corporation's SSHB10HS-R17046 is a UL approved EMI mains filter with 250V rated voltage and 1.7A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for applications requiring single-phase EMI filtering in compact spaces.
TF2514HU-101Y7R0-01
TDK TF2514HU-101Y7R0-01 is a 280V UL/CSA/IEC approved EMI mains filter with 7A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting applications due to its compact D25xH14mm dimensions.
3-103-706
Schurter Ag
Schurter Ag's 3-103-706 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. It operates at -40 to 100°C, has 3A rated current, and 0.5mA max leakage current. Ideal for panel mounting applications in various industries due to its compact size (25mm W x 85mm L x 89.5mm H) and frequency range of 50/60Hz.
FN406B-6-02
Schaffner Holding Ag's FN406B-6-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 6A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2500V. Ideal for applications requiring through-hole mounting in various industries.
SSR10VS-08180
KEMET Corporation's SSR10VS-08180 EMI Mains Filter is UL approved with a rated voltage of 250V. It offers a min insulation resistance of 100 Mohm and can operate b/w -25°C to 120°C. This single-phase filter, with a rated current of 0.8A, is ideal for applications requiring effective electromagnetic interference suppression.
P3215-AL
Coilcraft
Coilcraft's P3215-AL EMI Mains Filter is a single-phase filter with 4 terminals. It has UL approval and can handle up to 3.2A current. With dimensions of L31.8xB15.88xH31.2 mm, it is ideal for applications requiring EMI filtering in electronic devices operating b/w -40°C to 85°C temperature range.
RSEL-2002WL
RSEL-2002WL by TDK is a 250V single-phase EMI filter with approvals from CSA, ENEC-14, and UL. It offers a rated current of 2A, max operating temperature of 85°C, and min insulation resistance of 100 Mohm. Ideal for panel mounting applications requiring effective mains filtering in the frequency range of 60Hz.
FN9246-10-06
SINGLE PHASE EMI FILTER;
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
30AYP6C
TE Connectivity's 30AYP6C is a UL, CSA, VDE approved EMI mains filter with insertion loss of 15 dB at min frequency and 50 dB at max frequency. Rated for 250V, it operates b/w -10 to 40°C and has a rated current of 30A. Ideal for three-phase EMI filtering applications due to its high pot rating of 1450V and compact dimensions (L224.0xB141.5xH65.0 mm).
B82722A2202N002
TDK B82722A2202N002 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, 50/60Hz operating frequency, and through-hole mounting. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
6EQ1
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
SC22-05-30J
KEMET Corporation's SC22-05-30J EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 5A. It is a single-phase filter with UL approval, operating b/w -25°C to 120°C. Ideal for applications requiring effective electromagnetic interference filtering in compact spaces.
SN8S-130
KEMET Corporation's SN8S-130 is a SINGLE PHASE EMI FILTER with 5A rated current, operating from -25°C to 105°C. With an 18mm diameter and 9mm height, it is designed for THROUGH HOLE MOUNT applications in EMI mains filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN212-4-02-0M7
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Length: 18 mm; Width (mm): 12.5; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN214-1-02-15M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10; Maximum Operating Temperature: 100 Cel;
RN214-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Rated Voltage: 300 V;
RN212-0.5-02
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Length: 18 mm; Height: 20 mm; Width (mm): 12.5; Operating Frequency (Hz): 50/60Hz;
RN212-0.5-02-18M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch);
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 125 Cel; Approvals (V): UL; VDE; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN214-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 100 Cel; Height: 25 mm; Operating Frequency (Hz): 50/60Hz; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-4M2
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
RN214-3-02-2M0
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
RN212-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
RN212-2-02-1M8
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; IEC; VDE; ENEC-10; Rated Voltage: 300 V; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT;
RN212-0.8-02
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; VDE; Maximum Operating Temperature: 125 Cel; Rated Voltage: 250 V;
RN212-2-02
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; VDE; Length: 18 mm; Width (mm): 12.5; Mounting Type: THROUGH HOLE MOUNT;
RN212-0.4-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Minimum Operating Temperature: -40 Cel; Width (mm): 12.5; Maximum Operating Temperature: 100 Cel; Operating Frequency (Hz): 50/60Hz;
RN212-0.4-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Rated Voltage: 300 V; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch); Width (mm): 12.5;
RN212-0.5-02-27M
The Schaffner Holding Ag RN212-0.5-02-27M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.5A rated current. It operates b/w -40 to 100 °C at 50/60Hz frequency. Ideal for single-phase applications due to its compact dimensions of L18.0xB12.5xH20.0 mm and through-hole mounting type.
RN212-1.2-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Maximum Operating Temperature: 100 Cel; Length: 18 mm; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch); Approvals (V): UL; IEC; VDE; ENEC-10;
RN212-1.5-02-3M3
Schaffner Holding Ag's RN212-1.5-02-3M3 EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rating and 1.5A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency with dimensions of L18.0xB12.5xH20.0mm for through-hole mounting.
RN212-2.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Mounting Type: THROUGH HOLE MOUNT; Length: 18 mm; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved