Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RN214-1-02-15M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with 300V rated voltage and 1A rated current. Operating at temperatures from -40°C to 100°C, it has dimensions of L23.0xB15.5xH25.0 mm and is ideal for applications requiring effective filtering of electromagnetic interference in electronic systems.
Median Price
$2.120
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$1.953
100+ parts
$1.273
1k+ parts
$1.020
10k+ parts
$0.977
DigiKey
$1.435
$1.181
$1.093
Master Electronics
-
$3.154
$2.342
$1.948
Verical
$4.096
$2.970
Chip1Stop
$1.080
Nova Conductors
$1.043
TME
$1.810
Electro Sonic
$1.500
$1.140
$1.040
Vyrian
IBS Electronics
$4.423
$3.285
$2.732
Schukat
$1.126
Dan-Mar Components
Bristol Electronics
$1.405
Argo Parts USA
Netroflash
$1.022
$0.991
$0.970
Perfect Parts
Continental Prestige Electronics
$1.090
Multiple approvals ensure high quality and compliance with safety standards.
Suitable for a wide range of applications requiring up to 300 V.
Effective in reducing electromagnetic interference for single phase systems.
Can operate efficiently in high temperature environments.
Suitable for use in cold temperature conditions as well.
Compact size allows for easy integration into various equipment.
Compatible with standard power frequencies for widespread use.
Optimal size for installation in different setups.
Secure mounting option for stability and reliability.
Versatile dimensions for diverse installation requirements.
Suitable for applications with low to moderate current requirements.
Compact height for space-saving installations.
EMI Mains Filters RN214-1-02-15M attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
General Semiconductor
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
SCF29XV-250-2R2A008JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
5500.2044
Schurter Ag
The Schurter Ag 5500.2044 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, operating temperature range from -25°C to 100°C, and max leakage current of 0.5mA. Ideal for panel mount applications with dimensions of L52.0xB46.0xH31.0mm.
B84142-B16-R
TDK
TDK's B84142-B16-R is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 16A rated current. Featuring 2700V high pot and 3.5mA max leakage current, it operates at 50/60Hz frequency. Ideal for panel mounting applications, its compact dimensions of L121.0xB113.0xH61.0mm make it suitable for various electronic devices requiring effective EMI mains filtering.
FN2030-4-06
Schaffner Holding Ag
FN2030-4-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L50.5xB44.5xH22.3 mm, it operates at temperatures ranging from -25 to 100 °C and can handle high pot up to 1100V.
744290321
Wuerth Elektronik & Kg
Wurth Elektronik 744290321 is an IEC-approved EMI mains filter with 80V rating and 3.25A current. It is a single-phase filter suitable for surface mount applications, operating b/w -40°C to 125°C. Dimensions are L14.5xB12.5xH9.5 mm, making it ideal for compact electronic devices requiring EMI filtering capabilities.
B84112B0000B020
TDK's B84112B0000B020 is a 250V UL/CSA/ENEC-10 approved EMI mains filter with 2A rated current. Featuring single-phase filter type, it offers 2700V high pot and 0.5mA max leakage current. Ideal for panel mount applications, its compact dimensions of L50xB45xH28.6mm make it suitable for various electronic devices requiring effective electromagnetic interference suppression.
7448040707
Wurth Elektronik 7448040707 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 7A rated current. With dimensions of L28.0XB19.0XH28.0 (mm), it is ideal for EMI mains filtering applications in electronics, ensuring efficient operation at temperatures ranging from -40 to 125 °C.
SSR21NV-M12345
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Length: 22 mm;
SS11VL-06180
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 18 MILLIHENRY;
SCF-01-5000
KEMET SCF-01-5000 is a single-phase EMI filter with 4 terminals, rated for 250V and 1A. Operating b/w -25°C to 60°C, it's designed for mains filtering applications at 50Hz frequency. With dimensions of L15.0xB12.0xH15.0 mm, it's ideal for through-hole mounting in various electronic devices.
400APH12L
TE Connectivity's 400APH12L is a UL-approved EMI mains filter with a rated voltage of 520V. It features a three-phase filter type, rated current of 400A, and high pot of 2200V. Ideal for panel mount applications, it operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
CMS2-1-R
Eaton Corporation
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
1-6609036-6
TE Connectivity's 1-6609036-6 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 40A. It operates b/w -10°C to 40°C, with max leakage current of 0.75mA. Ideal for panel mounting applications requiring effective electromagnetic interference suppression.
RN202-0.3-02
RN202-0.3-02 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It has UL and VDE approvals, making it suitable for various applications requiring EMI mains filtering.
FN2415L-6-29
FN2415L-6-29 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6A rated current. It operates at temperatures from -25°C to 100°C, with approvals from IEC, EN, UL, and CSA. Ideal for EMI mains filtering applications due to its high pot of 1100V and max leakage current of 2.59mA.
SC-03-10G
KEMET Corporation's SC-03-10G EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 3A. It is UL approved and operates b/w -25°C to 105°C. Ideal for single-phase EMI filtering applications with through-hole mounting, dimensions L17.5xB14.0xH17.5mm.
P3215-AL
Coilcraft
Coilcraft's P3215-AL EMI Mains Filter is a single-phase filter with 4 terminals. It has UL approval and can handle up to 3.2A current. With dimensions of L31.8xB15.88xH31.2 mm, it is ideal for applications requiring EMI filtering in electronic devices operating b/w -40°C to 85°C temperature range.
RN212-0.5-02
RN212-0.5-02 by Schaffner Holding Ag is a UL and VDE approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -40°C to 125°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of 12.5mm x 18mm x 20mm, it has a rated current of 0.5A and mounts through holes efficiently.
CMS2-4-R
Eaton Corporation's CMS2-4-R is a UL-approved single-phase EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.8A. Ideal for surface mount applications due to its compact dimensions of L8.89xB8.89xH6.0 mm, it offers effective EMI filtering in various electronic devices.
SSRH7H-M07196
KEMET Corporation's SSRH7H-M07196 is a UL approved EMI mains filter with 100 Mohm insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 120°C and has a rated current of 0.7A. It is designed for through-hole mounting applications, measuring 14.5mm in width, 18mm in length, and 12mm in height.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN214-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Rated Voltage: 300 V;
RN212-0.5-02-18M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch);
RN212-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Length: 18 mm; Height: 20 mm; Width (mm): 12.5; Operating Frequency (Hz): 50/60Hz;
RN212-1.5-02
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 125 Cel; Approvals (V): UL; VDE; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN214-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 100 Cel; Height: 25 mm; Operating Frequency (Hz): 50/60Hz; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-4M2
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
RN214-3-02-2M0
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
RN214-1-02
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 23 mm; Maximum Operating Temperature: 125 Cel; Height: 25 mm;
RN214-0.5-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-0.5-02-56M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Width (mm): 15.5; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-0.8-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Length: 23 mm;
RN214-1.2-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-2M2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 15.5; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-2.5-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Rated Voltage: 300 V; Length: 23 mm; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-4-02-1M5
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Height: 25 mm; Width (mm): 15.5;
RN216-0.5-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Length: 23 mm; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
RN216-0.5-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 100 Cel; Width (mm): 15.5; Height: 25 mm; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN216-1-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: THROUGH HOLE MOUNT; Length: 23 mm; Minimum Operating Temperature: -40 Cel; Width (mm): 15.5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved