Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RN212-0.5-02 by Schaffner Holding Ag is a UL and VDE approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -40°C to 125°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of 12.5mm x 18mm x 20mm, it has a rated current of 0.5A and mounts through holes efficiently.
Median Price
$1.541
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$1.340
1k+ parts
$1.190
10k+ parts
Verical
$1.742
$1.599
Nova Conductors
$1.208
LWI Electronics Inc
Sensible Micro Corp
$1.093
$1.009
SPM Sales
Electro Sonic
$1.380
$1.230
Vyrian
Euro-Tech
Argo Parts USA
Continental Prestige Electronics
$1.184
Netroflash
$1.147
$1.123
AZTECH Wire
$18.787
Kepictronics
Perfect Parts
Having UL and VDE approvals ensures that this EMI Mains Filter meets safety standards and requirements set by authorities, making it a reliable choice for use.
With a rated voltage of 250V, this EMI Mains Filter is suitable for use in various applications where standard voltage levels are required.
The single phase EMI filter helps in reducing electromagnetic interference, ensuring better performance and reliability of connected equipment.
With a high maximum operating temperature of 125°C, this EMI Mains Filter can withstand elevated temperatures without compromising its functionality.
The low minimum operating temperature of -40°C allows this EMI Mains Filter to perform efficiently even in extreme cold conditions.
The compact width of 12.5mm makes this EMI Mains Filter suitable for installation in limited space, providing flexibility in various applications.
Supporting a standard operating frequency of 50/60Hz, this EMI Mains Filter is compatible with most power systems and equipment, ensuring seamless integration.
The length of 18mm offers a balanced form factor for this EMI Mains Filter, making it easy to install while maintaining optimal performance.
The through hole mount design provides secure and reliable mounting for this EMI Mains Filter, ensuring stability and ease of installation in various applications.
With a rated current of 0.5A, this EMI Mains Filter is suitable for low to moderate current applications, providing effective filtering without overloading.
The height of 20mm strikes a balance between space-saving design and efficient performance, making this EMI Mains Filter suitable for different installation requirements.
EMI Mains Filters RN212-0.5-02 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
RN212-0.5-02 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Electronic Transistors
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RN214-1.5-02-6M8
Schaffner Holding Ag
RN214-1.5-02-6M8 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1.5A rated current. It operates b/w -40 to 100°C and has dimensions of L23.0xB15.5xH25.0 mm, suitable for single-phase EMI filtering applications in various industries.
FIL-1S-1-20A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 99.5 mm; Width (mm): 45; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE;
RTEN-2020
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: PANEL MOUNT; Maximum Leakage Current: 1 mA; Minimum Insulation Resistance: 100 Mohm; Height: 42 mm;
SS26V-070510
KEMET Corporation
SS26V-070510 by KEMET Corporation is a single-phase EMI filter with a rated voltage of 250 V. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 120 °C. This filter is commonly used for EMI mains filtering applications.
50FC10
TE Connectivity
TE Connectivity's 50FC10 EMI Mains Filter is a UL approved single-phase filter with a rated voltage of 250V and current of 50A. With a wide operating temperature range (-10 to 40°C) and high pot rating (2250V), it is ideal for panel mount applications requiring effective EMI filtering at frequencies of 50-60Hz.
6EQ1
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
PLA10AN3521R2R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
SU9V-02080
SU9V-02080 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage. It offers 100 Mohm min insulation resistance, 0.2A rated current, and operates b/w -25°C to 120°C. Ideal for single-phase EMI filtering applications due to its compact dimensions of L17.0xB11.0xH17.0 mm.
SS11VL-R22020
SS11VL-R22020 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage, 2.2A current, and -25 to 75°C operating temp range. Its compact size (L22.0xB14.5xH19.5 mm) makes it ideal for EMI mains filtering applications in various electronic devices.
RTEN-5060
TDK
The TDK RTEN-5060 EMI Mains Filter is a THREE PHASE filter with 60A rated current and 500V voltage. It offers high insulation resistance of 100 Mohm, UL and EN approvals, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
FN406-3-02
Schaffner Holding Ag's FN406-3-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 3A rated current. It operates at -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.373mA. Ideal for applications requiring through-hole mounting in systems with 50/60Hz operating frequency.
PLA10AN1030R7R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1030R7R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min. Insulation Resistance, 300 V Rated Voltage, and 0.7 A Rated Current. It operates b/w -25 to 120 °C and is ideal for EMI mains filtering applications due to its Through Hole Mounting type and compact dimensions of L18.0xB16.0xH17.5 mm.
SSHB21HS-08200
KEMET Corporation's SSHB21HS-08200 is a UL-approved EMI mains filter with 100 Mohm min insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 130°C and has a max high pot of 500V. Ideal for through-hole mounting applications requiring 0.8A current handling capacity.
SC-02-30G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Diameter (mm): 17.5; Height: 14 mm; Minimum Operating Temperature: -25 Cel;
FMW-65-0001
Schurter Ag
Schurter Ag's FMW-65-0001 EMI Mains Filter is a UL, IEC, VDE, and ENEC-10 approved three-phase filter with 440V rated voltage. With a max operating temperature of 100°C and high pot of 3000V, it has a rated current of 3A. Ideal for panel mounting applications in various industries due to its compact dimensions (L66.0xB51.0xH43.0 mm).
10VW1
The TE Connectivity 10VW1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 18 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
PLA10AN1522R0R2B
Murata Manufacturing's PLA10AN1522R0R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. It is used for EMI mains filtering applications requiring 2 A Rated Current in through-hole mounting setups.
SC-030-E150JH-P
KEMET Corporation's SC-030-E150JH-P is a UL approved EMI mains filter with 250V rated voltage, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and has a diameter of 31mm.
SU9VF-03060
KEMET Corporation's SU9VF-03060 EMI Mains Filter is a single-phase filter with 250V rated voltage and 0.3A rated current. With a temperature range of -25 to 120°C, it is suitable for through-hole mounting applications. This compact filter, measuring 11mm in width and 17mm in height, is ideal for noise suppression in electronic devices.
1000APS12L
TE Connectivity's 1000APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting applications, this filter offers high pot protection up to 2200V and max leakage current of 270mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN214-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Rated Voltage: 300 V;
RN212-0.5-02-18M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch);
RN212-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
RN212-1.5-02
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 125 Cel; Approvals (V): UL; VDE; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN214-1-02-15M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10; Maximum Operating Temperature: 100 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 100 Cel; Height: 25 mm; Operating Frequency (Hz): 50/60Hz; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-4M2
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
RN214-3-02-2M0
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
RN212-0.6-02
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 12.5;
RN212-0.8-02
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; VDE; Maximum Operating Temperature: 125 Cel; Rated Voltage: 250 V;
RN212-2-02
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; VDE; Length: 18 mm; Width (mm): 12.5; Mounting Type: THROUGH HOLE MOUNT;
RN212-0.4-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Minimum Operating Temperature: -40 Cel; Width (mm): 12.5; Maximum Operating Temperature: 100 Cel; Operating Frequency (Hz): 50/60Hz;
RN212-0.4-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Rated Voltage: 300 V; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch); Width (mm): 12.5;
RN212-0.5-02-27M
The Schaffner Holding Ag RN212-0.5-02-27M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.5A rated current. It operates b/w -40 to 100 °C at 50/60Hz frequency. Ideal for single-phase applications due to its compact dimensions of L18.0xB12.5xH20.0 mm and through-hole mounting type.
RN212-1.2-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Maximum Operating Temperature: 100 Cel; Length: 18 mm; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch); Approvals (V): UL; IEC; VDE; ENEC-10;
RN212-2-02-1M8
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; IEC; VDE; ENEC-10; Rated Voltage: 300 V; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT;
RN212-2.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Mounting Type: THROUGH HOLE MOUNT; Length: 18 mm; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN212-3.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Maximum Operating Temperature: 100 Cel; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN212-4-02-0M7
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Length: 18 mm; Width (mm): 12.5; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved