Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Schaffner Holding Ag RN214-0.3-02-47M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.3A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L23.0xB15.5xH25.0mm for through-hole mounting in various electronic devices.
Median Price
$2.060
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$1.004
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$1.900
$1.360
$1.180
$1.100
Distrelec
$2.219
$1.887
DigiKey
$2.260
$1.531
$1.260
$1.166
TE Connectivity
$3.630
Verical
Master Electronics
$1.610
$1.190
$0.994
Nova Conductors
$1.015
Vyrian
IBS Electronics
$1.529
$1.346
$1.220
Continental Prestige Electronics
$0.995
Argo Parts USA
Netroflash
AZTECH Wire
$5.904
Authorized Procurement Solutions
Perfect Parts
Having approvals from UL, IEC, VDE, and ENEC-10 ensures that this product meets international safety and quality standards.
With a rated voltage of 300V, this EMI mains filter is suitable for a wide range of applications and can handle higher voltages.
Being a single-phase EMI filter, it effectively reduces electromagnetic interference, ensuring clean power supply to connected equipment.
The high maximum operating temperature of 100°C allows this filter to function reliably even in demanding environments or under heavy loads.
With a low minimum operating temperature of -40°C, this filter can operate efficiently in cold conditions without any issues.
The compact width of 15.5mm makes it suitable for installations with space constraints or in applications where size is a critical factor.
Operating at a common frequency of 50/60Hz ensures compatibility with a wide range of power systems and equipment.
The length of 23mm provides a good balance between compactness and performance, making it versatile for various applications.
The through-hole mounting type offers secure and reliable installation, ensuring stability and ease of assembly in different setups.
The compact dimensions make it easy to integrate into existing systems without taking up too much space.
With a rated current of 0.3A, this filter is suitable for low to moderate power applications while providing effective EMI suppression.
The height of 25mm strikes a good balance between compactness and functionality, allowing for efficient placement in various setups.
EMI Mains Filters RN214-0.3-02-47M attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
C0805C104K5RACTU
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
B82722J2302N001
TDK
The TDK B82722J2302N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
10VR6
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
NAC-10-102-D
Cosel
Cosel NAC-10-102-D is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 10A rated current. It operates b/w -40°C to 85°C, offering single-phase filtering at 60Hz frequency. Ideal for DIN rail mounting applications due to compact dimensions of L92.0xB53.0xH41.0mm.
5500.2003
Schurter Ag
The Schurter Ag 5500.2003 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates at -25 to 85°C temperatures, and offers high pot of 2700V. Ideal for single-phase EMI filtering applications with a rated current of 4A and dimensions of L25.0xB25.0xH25.0 mm.
7448040435
Wuerth Elektronik & Kg
Wurth Elektronik 7448040435 is a single-phase EMI mains filter with approvals from ENEC-10 and VDE. It has a rated voltage of 250V, rated current of 3.5A, and operates b/w -40°C to 125°C. Ideal for through-hole mounting applications in electronics to reduce electromagnetic interference at 50Hz frequency.
SSB11H-R13090
KEMET Corporation's SSB11H-R13090 EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 130°C, ideal for single-phase applications. This filter has a rated current of 1.3A and dimensions of L21.0xB20.5xH16.0mm, suitable for through-hole mounting in various electronic devices.
6EHQ1
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Maximum Frequency: 42 dB; Maximum Leakage Current: .002 mA;
FN2010M-20-06
Schaffner Holding Ag
FN2010M-20-06 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 100°C. It has approvals from EN, IEC, CSA, and UL. This panel mount filter is suitable for applications requiring up to 20A of rated current and operates at an operating frequency of 400Hz.
PLA10AN3030R4R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm;
SSRH24NH-50041
KEMET Corporation's SSRH24NH-50041 is a UL approved EMI mains filter with 250V rated voltage and 5A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 25.5mm x 18mm. Ideal for single-phase EMI filtering applications.
SCR22-060-1R0A075JH
KEMET's SCR22-060-1R0A075JH is a UL-approved EMI mains filter with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter. Ideal for through-hole mounting applications in various industries.
RSHN-2006D
The TDK RSHN-2006D is a UL, CSA, EN approved EMI mains filter with 250V rated voltage and 6A rated current. It operates b/w -25°C to 85°C, with max leakage current of 1mA. Ideal for single-phase EMI filtering applications, it features DIN rail mounting and compact dimensions of L98.0xB52.0xH35.0mm (L3.858xB2.047xH1.378inch).
PLH10AN1612R1P2B
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 160 MICRO HENRY; HIGH-FREQUENCY TYPE; CORE VERTICAL TYPE STRUCTURE; ALIGNED WINDING TYPE; JESD-609 Code: e2;
B84112G0000B030
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
SCF19XV-150-1R3A006JH
SINGLE PHASE EMI FILTER;
SC-03-06G
KEMET Corporation's SC-03-06G is a UL-approved EMI mains filter with 250V rated voltage and 3A current. It offers a min insulation resistance of 100 Mohm, operates b/w -25°C to 105°C, and has dimensions of L17.5xB14.0xH17.5 mm. Ideal for single-phase applications requiring effective electromagnetic interference filtering in compact spaces.
B82722J2202N001
TDK B82722J2202N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
B84112G0000G125
TDK B84112G0000G125 is a 250V single-phase EMI filter with CSA, EN, UL, and IEC approvals. It operates at -25 to 100°C temperature range and has a rated current of 25A. Ideal for panel mounting applications requiring effective EMI mains filtering.
6609047-3
TE Connectivity's 6609047-3 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max current of 15A. It operates b/w -10°C to 40°C, with a max leakage current of 1.2mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
FN2010B-16-06
Schaffner Holding Ag's FN2010B-16-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and can handle a high pot of 2500V. This single-phase filter is panel mountable and ideal for applications requiring effective electromagnetic interference suppression.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN212-0.5-02-18M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch);
RN212-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
RN212-0.5-02
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Length: 18 mm; Height: 20 mm; Width (mm): 12.5; Operating Frequency (Hz): 50/60Hz;
RN212-1.5-02
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 125 Cel; Approvals (V): UL; VDE; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN214-1-02-15M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10; Maximum Operating Temperature: 100 Cel;
RN214-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 100 Cel; Height: 25 mm; Operating Frequency (Hz): 50/60Hz; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-4M2
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
RN214-3-02-2M0
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
RN214-0.3-02
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 23 mm; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT;
RN214-0.5-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-0.5-02-56M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Width (mm): 15.5; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-0.8-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Length: 23 mm;
RN214-1.2-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-2M2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 15.5; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-2.5-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Rated Voltage: 300 V; Length: 23 mm; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-4-02-1M5
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Height: 25 mm; Width (mm): 15.5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved