Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power and mains transformers are types of electrical transformers used in power transmission and distribution systems to convert high voltage and low current to low voltage and high current or vice versa. They are essential components in the electricity grid, and are used to step up or step down voltage levels for efficient transmission and distribution of electrical energy.Power transformers are used in high voltage transmission systems, typically at voltages of 110 kV and above, to step up or step down the voltage levels. They have a high power rating, typically ranging from several hundred kVA to several thousand MVA, and are designed to handle high currents and voltages without overheating or breaking down. Power transformers are typically oil-immersed, and use a magnetic core made of laminated steel to reduce losses and improve efficiency.Mains transformers, also known as distribution transformers, are used in low voltage distribution systems, typically at voltages of 11 kV or below, to step down the voltage levels for use by consumers. They have a lower power rating than power transformers, typically ranging from several kVA to several hundred kVA, and are designed to operate at lower voltages and currents. Mains transformers are typically dry-type, and use a magnetic core made of laminated steel or ferrite to reduce losses and improve efficiency.Both power and mains transformers require proper design, selection, and maintenance to ensure reliable and efficient operation. They are subject to various standards and regulations, such as IEC (International Electrotechnical Commission) and IEEE (Institute of Electrical and Electronics Engineers), to ensure their safety and performance. Proper installation and maintenance of transformers, such as regular inspection, testing, and oil analysis, are also critical to ensure their longevity and performance.
Add filters
All
Selected
TCT40-01E07AB
Triad Magnetics
TCT40-01E07AB by Triad Magnetics is a 40 VA power transformer with isolation voltage of 1500V, output current of 1.67A, and output voltage of 24V. It is CSA and UL approved for POWER applications, featuring dimensions of D92.5xH56.5mm and a single primary rating of 120V at a nominal frequency of 50/60Hz.
POWER
CSA, UL
NO
92.5 mm
56.5 mm
120
1500 V
92.46 mm
CHASSIS MOUNT
1
50/60 HZ
1.67 A
24 V
D92.5XH56.5 (mm)
SINGLE 120V
Other Transformers
POWER TRANSFORMER
40 VA
59.44 mm
VPL24-2000
VPL24-2000 by Triad Magnetics is a 50 VA power transformer with dual 115V primary rating. It features two windings for both primary and secondary, providing isolation voltage of 3500V. With dimensions of L101.6xB57.15xH65.07 (mm), it is ideal for chassis mount applications in power systems at 50/60Hz frequency.
CE, TUV
65.07 mm
115/230
3500 V
101.6 mm
2
4.116 A
12 V
L101.6XB57.15XH65.07 (mm)
DUAL 115V
50 VA
57.15 mm
VPL24-210
Triad Magnetics VPL24-210 is a 5VA power transformer with dual 115V primary rating and 12V output voltage. It features 2 windings for both primary and secondary, with an isolation voltage of 3500V. Ideal for power applications, this chassis mount transformer has dimensions of L60.32xB36.5xH36.5 (mm).
CUL; TUV; UL
36.5 mm
60.32 mm
.42 A
L60.32XB36.5XH36.5 (mm)
5 VA
F20-120-C2
Triad Magnetics' F20-120-C2 is a split bobbin power transformer with 2.5 VA rating, 10V output voltage, and 0.12A output current per winding. It offers an isolation voltage of 4.2MV and is ideal for applications requiring a compact design with through-hole mounting in electronics or industrial equipment.
30.15 mm
4200000 V
34.92 mm
THROUGH HOLE MOUNTED
.12 A
10 V
L34.92XB28.57XH30.15 (mm)
SINGLE 115V
SPLIT BOBBIN POWER TRANSFORMER
2.5 VA
28.57 mm
FS10-1200-C2
Triad Magnetics' FS10-1200-C2 is a 12VA power transformer with dual 115V primary rating. It offers 1.2A output current on two windings at 5V each, and an isolation voltage of 4.2MV. Ideal for applications requiring compact dimensions (L47.62xB39.67xH36.5 mm) and through-hole mounting in split bobbin power setups at 50/60Hz frequency.
47.62 mm
1.2 A
5 V
L47.62XB39.67XH36.5 (mm)
12 VA
39.67 mm
VPT100-10000
VPT100-10000 by Triad Magnetics is a 1000 VA toroidal power transformer with dual 115V primary rating. It has two windings for both primary and secondary, providing 20A output current at 50V. With CE, CUL, and UL approvals, it is ideal for power applications requiring high isolation voltage of 4000V.
CE, CUL, UL
178 mm
76 mm
4000 V
e3
20 A
50 V
D175.0XH68.0 (mm)
TIN
TOROIDAL POWER TRANSFORMER
1000 VA
VPT100-25000
VPT100-25000 by Triad Magnetics is a 2500 VA toroidal power transformer with dual 115V primary rating. It features 2 windings each for primary and secondary, providing an isolation voltage of 4000V. With approvals from CE, CUL, and UL, it is ideal for power applications requiring a 50A output current at 50V.
210 mm
120 mm
50 A
D208.0XH112.0 (mm)
2500 VA
VPT30-1670
Triad Magnetics' VPT30-1670 is a 50 VA toroidal power transformer with dual 115V primary rating. It features 2 primary and secondary windings, providing 15V output voltage at 3.34A current. With CE, CUL, UL approvals and 4000V isolation voltage, it's ideal for power applications requiring reliable performance in a compact D80.0XH33.0 mm chassis-mount design.
83 mm
36 mm
3.34 A
15 V
D80.0XH33.0 (mm)
VPT30-3330
Triad Magnetics' VPT30-3330 is a 100 VA toroidal power transformer with dual 115V primary rating. It has two windings each for primary and secondary, providing 15V output at 6.66A current. With CE, CUL, UL approvals, it's ideal for power applications requiring 4000V isolation voltage.
88 mm
51 mm
6.66 A
D87.0XH47.0 (mm)
100 VA
VPT30-5330
The Triad Magnetics VPT30-5330 is a 160 VA toroidal power transformer with dual 115V primary rating and 18V output voltage. It features CE, CUL, UL approvals and offers isolation voltage of 4000V. Ideal for power applications, this transformer has two windings each for primary and secondary with dimensions of D103.0XH48.0 (mm).
106 mm
52 mm
8.88 A
18 V
D103.0XH48.0 (mm)
160 VA
VPT30-830
VPT30-830 by Triad Magnetics is a 25 VA toroidal power transformer with dual 115V primary rating. It features 2 windings each for primary and secondary, providing an isolation voltage of 4000V. With CE, CUL, and UL approvals, it is ideal for power applications requiring 15V output at 1.66A current.
74 mm
34 mm
1.66 A
D71.0XH32.0 (mm)
25 VA
1146
Amecon
TOROIDAL POWER TRANSFORMER; Output Current-1: 3.57 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 100 VA;
60 HZ
3.57 A
2024
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2024; No. of Winding (Secondary): 1; Output Current-1: .44 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 8 VA;
.44 A
8 VA
2167
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2167; Volt-Ampere Rating (VA): 100 VA; No. of Winding (Secondary): 1; Output Current-1: .87 A; Nominal Operating Frequency: 60 HZ;
.87 A
2264
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2264; Output Current-1: 22.22 A; Volt-Ampere Rating (VA): 400 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
22.22 A
400 VA
2165
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2165; Output Current-1: 4.17 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 100 VA; No. of Winding (Secondary): 1;
4.17 A
2190
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2190; No. of Winding (Secondary): 1; Output Current-1: 4 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 120 VA;
4 A
120 VA
2292
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2292; Volt-Ampere Rating (VA): 600 VA; Output Current-1: 12.5 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
12.5 A
600 VA
166G28
Hammond Manufacturing
The Hammond Manufacturing 166G28 is a Split Bobbin Power Transformer with 2000V isolation voltage, 0.5A output current, and 14VA Volt-Ampere rating. Ideal for applications requiring a single 115V primary rating, this transformer features a center tap feature, chassis mounting option, and operates at a nominal frequency of 60Hz.
CSA; UL
YES
42.926 mm
115
2000 V
71.374 mm
.5 A
28 V
14 VA
41.402 mm
166G30
166G30 by Hammond Manufacturing is a 15 VA power transformer with 30V output voltage and 0.5A output current. It features isolation voltage of 2000V, CSA and UL approvals, and a center tap feature. Ideal for chassis mounting applications requiring a single 115V primary rating.
50.8 mm
82.55 mm
30 V
15 VA
166J28
166J28 by Hammond Manufacturing is a Split Bobbin Power Transformer with 28 VA rating, 2000V isolation voltage, and CSA/UL approvals. Ideal for applications requiring a single 115V primary rating, it features a center tap, output of 28V at 1A, and chassis mounting capability.
1 A
28 VA
166L28
The Hammond Manufacturing 166L28 transformer has a 56 VA rating with an output voltage of 28 V and isolation voltage of 2000 V. It is CSA and UL approved, suitable for chassis mounting applications requiring a center tap feature and single primary input at 115V.
58.674 mm
93.726 mm
2 A
56 VA
54.102 mm
166M16
The Hammond Manufacturing 166M16 is a power transformer with an isolation voltage of 2000V and an output current of 3A. It has a center tap feature and provides an output voltage of 16V. This transformer is suitable for chassis mount applications in the power and mains category.
3 A
16 V
48 VA
263CX
263CX by Hammond Manufacturing is a Power Transformer with 116 VA rating, 2000V isolation voltage, and dual output currents of 3A and 0.287A. Ideal for applications requiring a center tap feature, such as power supply units or industrial equipment. Dimensions: 95.25mm x 63.5mm x 77.724mm for chassis mounting setups.
CSA
77.724 mm
95.25 mm
.287 A
360 V
116 VA
63.5 mm
278X
278X by Hammond Manufacturing is a Power Transformer with 229 VA rating, 2000V isolation voltage, and 6A output current. Ideal for applications requiring a transformer with center tap feature, CSA approval, and chassis mounting capability.
96.774 mm
3
6 A
.23 A
800 V
6.3 V
229 VA
79.502 mm
84910
Pico Electronics
Pico Electronics' 84910 power transformer has a VA rating of 2.4VA, output voltage of 68V, and operates at a frequency of 400Hz. Ideal for military applications with MIL-PRF-27 approval, this transformer features a center tap and tin/lead terminal finish in compact dimensions of L25.4xB20.32xH23.24mm.
MIL-PRF-27
23.24 mm
26
e0
20.32 mm
SURFACE MOUNT
400 HZ
90 Cel
.0353 A
68 V
L25.4XB20.32XH23.24 (mm)
SINGLE 26V
Tin/Lead (Sn/Pb)
2.4 VA
TM5-5
Abbott Technologies
Abbott Technologies' TM5-5 is a 100 VA toroidal power transformer with an isolation voltage of 1000V. It operates at a max temperature of 90°C, outputting 14V at 7.14A for applications requiring reliable power conversion in aerospace and military equipment.
STANDARD: MIL-PRF-27F
1000 V
TM
7.14 A
14 V
3FS-224
Tamura
The Tamura 3FS-224 is a power transformer with UL and CSA approvals. It has two secondary windings, an output current of 0.045 A, and a VA rating of 1.1 VA. Ideal for applications requiring a nominal operating frequency of 60 HZ.
PCB MOUNTABLE
UL; CSA
.045 A
1.1 VA
3FD-248
The Tamura 3FD-248 power transformer has a VA rating of 1.1VA, output current of 0.023A, and operates at 60Hz frequency. It is UL and CSA approved for various applications requiring reliable power supply solutions.
.023 A
3FD-512
The Tamura 3FD-512 power transformer has a VA rating of 12VA, output current of 1A, and dual secondary windings. It is UL and CSA approved for applications requiring a 60Hz frequency. Ideal for various power supply applications due to its compact design and reliable performance.
10A009
POWER TRANSFORMER; Approvals (V): UL; CSA; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): .7 VA; Additional Features: PCB MOUNTABLE; Nominal Operating Frequency: 60 HZ;
.05 A
.7 VA
161G20
The Hammond Manufacturing 161G20 is a split bobbin power transformer with 10 VA rating, 1 A output current, and 2000 V isolation voltage. Ideal for PCB mounting applications, it operates at a nominal input voltage of 115V and provides an output voltage of 10V at a frequency of 60 Hz.
49.276 mm
PCB MOUNT
10 VA
36.576 mm
160F24
The Hammond Manufacturing 160F24 is a Split Bobbin Power Transformer with dual 115/230V primary rating. It offers an isolation voltage of 2000V, output current of 0.36A, and output voltage of 12V. Ideal for PCB mounting applications in power systems requiring a compact transformer solution.
36.83 mm
.36 A
DUAL 115/230V
4.4 VA
31.75 mm
160G28
160G28 by Hammond Manufacturing is a Split Bobbin Power Transformer with dual 115/230V primary rating. It has an isolation voltage of 2000V, output current of 0.72A, and output voltage of 14V. Ideal for PCB mounting applications requiring a compact transformer with a VA rating of 10VA.
.72 A
162D10
162D10 by Hammond Manufacturing is a Split Bobbin Power Transformer with dual 115V primary rating. It has an isolation voltage of 2500 V, output current of 0.22 A, and two secondary windings. Ideal for PCB mounting applications, it offers output voltages of 5 V each and operates at a nominal frequency of 50/60 Hz.
CUL; UL
23.8125 mm
2500 V
35.052 mm
.22 A
28.702 mm
162F12
The Hammond Manufacturing 162F12 is a Split Bobbin Power Transformer with dual 115V primary rating and 6.3V output voltage. It has CUL and UL approvals, isolation voltage of 2500V, and VA rating of 6VA. Ideal for PCB mounting applications requiring reliable power conversion at 50/60Hz frequency.
33.274 mm
6 VA
162H16
162H16 by Hammond Manufacturing is a Split Bobbin Power Transformer with dual 115V primary rating. It features 2.5A output current, 20VA Volt-Ampere rating, and 2500V isolation voltage. Ideal for PCB mounting applications requiring reliable power conversion at 50/60Hz frequency.
2.5 A
8 V
20 VA
47.752 mm
183H16
183H16 by Hammond Manufacturing is a Split Bobbin Power Transformer with dual 115V primary rating. It offers 4000V isolation voltage, 20VA Volt-Ampere rating, and outputs of 8V at 2.5A. Ideal for power applications requiring reliable performance in compact spaces.
CE; CUL; TUV; UL
229D24
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CUL; UL; Center Tap Feature-2: NO; Isolation Voltage: 1750 V; Length: 79.248 mm;
1750 V
79.248 mm
182F30
The Hammond Manufacturing 182F30 is a Toroidal Power Transformer with 225 VA rating, 4000 V isolation voltage, and 7.5 A output current. Ideal for chassis mounting applications, it offers dual primary ratings of 117/234 V and dual secondary windings at 30 V each.
CE; CSA; UL
126.238 mm
117/234
48.26 mm
7.5 A
DUAL 117/234
225 VA
182L30
182L30 by Hammond Manufacturing is a Toroidal Power Transformer with 120 VA rating, 4000 V isolation voltage, and dual 117/234 primary rating. It has two secondary windings producing 30 V output voltage each at 4 A current. Ideal for chassis mounting in power applications requiring reliable and efficient power conversion.
101.092 mm
42.672 mm
182P110
The Hammond Manufacturing 182P110 is a toroidal power transformer with a VA rating of 500VA. It has an isolation voltage of 4000V and output currents of 4.54A at 110V. This transformer is commonly used in power and mains applications for its high voltage isolation and reliable performance.
139.7 mm
56.134 mm
4.54 A
110 V
500 VA
182P240
The Hammond Manufacturing 182P240 is a Toroidal Power Transformer with 1000 VA rating, 240V output voltage, and 4.17A output current. It is CE, CSA, and UL approved for applications requiring 4000V isolation voltage. Ideal for chassis mounting in dual 117/234V systems at 50/60Hz frequency.
165.1 mm
88.9 mm
240 V
182Q240
The Hammond Manufacturing 182Q240 is a Toroidal Power Transformer with 1500 VA Volt-Ampere Rating, 240 V Output Voltage, and 6.3 A Output Current-1. It is suitable for applications requiring high isolation voltage of 4000 V, such as power supply units in industrial equipment or audio amplifiers. Approved by CE, CSA, and UL for quality assurance.
182.88 mm
6.3 A
1500 VA
182R117
The Hammond Manufacturing 182R117 is a Toroidal Power Transformer with 1000 VA rating, 117 V output voltage, and 8.5 A output current. It is ideal for applications requiring dual 117/234 primary rating, chassis mounting feature, and CE/CSA/UL approvals.
8.5 A
117 V
182S110
The Hammond Manufacturing 182S110 is a Toroidal Power Transformer with 1000 VA rating, 4000 V isolation voltage, and dual 117/234 primary rating. It features two secondary windings producing 110 V output each, suitable for chassis mounting applications in power systems requiring up to 9.1 A output current.
9.1 A
182U30
The Hammond Manufacturing 182U30 is a 1000 VA toroidal power transformer with dual 117/234 V primary rating. It offers an isolation voltage of 4000 V, output current of 33.3 A, and two secondary windings for applications in power systems requiring reliable and efficient voltage conversion.
33.3 A
185G36
The Hammond Manufacturing 185G36 is a 175 VA power transformer with dual 115/230V primary rating. It features an isolation voltage of 4000 V, output currents up to 9.6 A, and two secondary windings for versatile applications. Ideal for chassis mounting in various electronic devices requiring reliable power conversion at 50/60 HZ frequency.
81.28 mm
9.6 A
175 VA
© 2023 All rights reserved
