Loading...

SAW Filters

SAW (Surface Acoustic Wave) filters are a type of electronic filter that operates on the principle of acoustic waves propagating on the surface of a piezoelectric material. These filters are widely used in radio frequency (RF) and microwave communication systems to suppress unwanted frequencies and improve signal quality.

The SAW filter consists of a piezoelectric substrate, typically made of quartz, onto which a set of interdigitated electrodes are deposited. The input signal is coupled to the SAW filter through the transducer electrodes, which convert the electrical signal to an acoustic wave. The acoustic wave then travels through the substrate, where it is selectively filtered by the frequency-dependent response of the substrate material, before being converted back to an electrical signal by the output transducer electrodes.

One of the key advantages of SAW filters is their high level of selectivity, which allows them to provide superior filtering performance compared to other types of filters. SAW filters can be designed to have very narrow bandwidths, which makes them ideal for applications that require high-frequency stability and low phase noise. Additionally, SAW filters are highly reliable and can operate over a wide temperature range, making them suitable for use in harsh environments.

SAW filters are used in a wide range of applications, including cellular communications, satellite communications, wireless LANs, and radio and television broadcasting. They are also used in industrial and medical applications where high-frequency stability is required. Overall, SAW filters provide a reliable and effective solution for improving the performance of RF and microwave communication systems.

SAW Filters

Available Parts 473

Part RoHS Manufacturer Description Filter Type Maximum Frequency Power Supply (V) No. of Functions Screening Level Output Impedance (ohm) Average Input Power Packing Method Mounting Type No. of Terminals I/O Impedance Sub-Category Dimensions Maximum Operating Temperature Attenuation At Maximum Frequency Maximum Attenuation Frequency (± Δf) Package Material Minimum Operating Temperature Minimum Attenuation Frequency (± Δf) Terminal Finish Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features Center/Cutoff Frequency (fo/fc) JESD-609 Code Minimum Frequency Impedance (Input) Length
B39921B3588U410 by TDK

B39921B3588U410

TDK

SAW FILTER; No. of Functions: 1; Width (mm): 3.0; Impedance (Input): 50 OHM; Additional Features: AEC-Q200; TEMPERATURE 0 TO 70 ALSO AVAILABLE; Minimum Operating Temperature: -40 Cel;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

22 dB

32000 kHz

CERAMIC

-40 Cel

NICKEL GOLD

1.1 mm

3.0

3.5 dB

AEC-Q200; TEMPERATURE 0 TO 70 ALSO AVAILABLE

915 MHz

e4

50 OHM

3 mm

B39162B4327P810 by TDK

B39162B4327P810

TDK

SAW FILTER; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT; No. of Terminals: 5; Maximum Insertion Loss: 2 dB; Minimum Operating Temperature: -40 Cel;

SAW FILTER

1

50 OHM

SURFACE MOUNT

5

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

-40 Cel

.4 mm

1.1

2 dB

1582.4 MHz

50 OHM

1.4 mm

885071 by Qorvo

885071

Qorvo

CERAMIC BPF; Maximum Frequency: 2400 MHz; Mounting Type: SURFACE MOUNT; Terminal Finish: GOLD OVER NICKEL; No. of Terminals: 5; Additional Features: 0 TO 85 AND -30 TO 85 TEMPERATURE ALSO AVAILABLE;

CERAMIC BPF

2400 MHz

1

50 OHM

14.159 W

TR, 13 INCH

SURFACE MOUNT

5

50 OHM

L1.4XB1.2XH0.5 (mm)/L0.055XB0.047XH0.02 (inch)

95 Cel

-40 Cel

GOLD OVER NICKEL

.5 mm

1.2

2.9 dB

0 TO 85 AND -30 TO 85 TEMPERATURE ALSO AVAILABLE

2400 MHz

e4

2400 MHz

50 OHM

1.4 mm

B39162B8813P810 by TDK

B39162B8813P810

TDK

SAW FILTER; Maximum Insertion Loss: 1.9 dB; Maximum Operating Temperature: 85 Cel; Width (mm): 0.9; No. of Functions: 1; Dimensions: L1.1XB0.9XH0.45 (mm)/L0.043XB0.035XH0.018 (inch);

SAW FILTER

1

50 OHM

SURFACE MOUNT

5

L1.1XB0.9XH0.45 (mm)/L0.043XB0.035XH0.018 (inch)

85 Cel

-30 Cel

Gold (Au) - with Nickel (Ni) barrier

.45 mm

0.9

1.9 dB

1582.47 MHz

e4

50 OHM

1.1 mm

B39921B3588U410W9 by TDK

B39921B3588U410W9

TDK

SAW FILTER; Center/Cutoff Frequency (fo/fc): 915 MHz; Minimum Operating Temperature: 0 Cel; Length: 3 mm; Width (mm): 3.0; Additional Features: AEC-Q200 QUALIFIED;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

70 Cel

0 Cel

Gold (Au)

1.1 mm

3.0

3.3 dB

AEC-Q200 QUALIFIED

915 MHz

e4

50 OHM

3 mm

RF3603D by Murata Manufacturing

RF3603D

Murata Manufacturing

SAW FILTER; Dimensions: L4.0XB4.0XH1.1 (mm)/L0.157XB0.157XH0.043 (inch); Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Additional Features: TAPE AND REEL; Impedance (Input): 50 OHM;

SAW FILTER

1

150 OHM

SURFACE MOUNT

8

SAW Filters

L4.0XB4.0XH1.1 (mm)/L0.157XB0.157XH0.043 (inch)

85 Cel

CERAMIC

-40 Cel

1.1 mm

4.0

2.2 dB

TAPE AND REEL

316.4 MHz

50 OHM

4 mm

B39242B8328P810 by TDK

B39242B8328P810

TDK

SAW FILTER; Output Impedance (ohm): 50 OHM//6.8 nH; Dimensions: L1.4XB1.1XH0.45 (mm)/L0.055XB0.043XH0.018 (inch); Length: 1.4 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -20 Cel;

SAW FILTER

1

50 OHM//6.8 nH

SURFACE MOUNT

5

L1.4XB1.1XH0.45 (mm)/L0.055XB0.043XH0.018 (inch)

85 Cel

-20 Cel

Gold (Au) - with Nickel (Ni) barrier

.45 mm

1.1

2.9 dB

2442 MHz

e4

50 OHM//6.8 nH

1.4 mm

B39431B3710U410 by TDK

B39431B3710U410

TDK

SAW FILTER; Package Material: CERAMIC; No. of Terminals: 6; Maximum Operating Temperature: 105 Cel; Additional Features: AEC-Q200; TEMPERATURE -40 TO 85 ALSO AVAILABLE; Maximum Insertion Loss: 3.1 dB;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

105 Cel

CERAMIC

-40 Cel

Nickel/Gold (Ni/Au)

1.1 mm

3.0

3.1 dB

AEC-Q200; TEMPERATURE -40 TO 85 ALSO AVAILABLE

433.92 MHz

e4

50 OHM

3 mm

B39871B3725U410 by TDK

B39871B3725U410

TDK

SAW FILTER; Maximum Operating Temperature: 70 Cel; Mounting Type: SURFACE MOUNT; JESD-609 Code: e4; No. of Terminals: 6; Minimum Operating Temperature: -20 Cel;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

70 Cel

CERAMIC

-20 Cel

16000 kHz

Gold (Au) - with Nickel (Ni) barrier

1.1 mm

3.0

3.5 dB

869 MHz

e4

50 OHM

3 mm

B39921B3728U410 by TDK

B39921B3728U410

TDK

SAW FILTER; Package Material: CERAMIC; Length: 3 mm; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 915 MHz;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

CERAMIC

-40 Cel

Nickel/Gold (Ni/Au)

1.1 mm

3.0

4 dB

915 MHz

e4

50 OHM

3 mm

885071-A by Qorvo

885071-A

Qorvo

SAW FILTER; Mounting Type: SURFACE MOUNT; Height: .5 mm; Terminal Finish: GOLD OVER NICKEL; Width (mm): 1.2; Dimensions: L1.4XB1.2XH0.5 (mm)/L0.055XB0.047XH0.02 (inch);

SAW FILTER

1

SURFACE MOUNT

5

L1.4XB1.2XH0.5 (mm)/L0.055XB0.047XH0.02 (inch)

95 Cel

-40 Cel

GOLD OVER NICKEL

.5 mm

1.2

-30 TO 85 TEMPERATURE RANGE ALSO AVAILABLE; TAPE AND REEL

2400 MHz

e4

1.4 mm

F6QA1G747M2QS-J by Taiyo Yuden

F6QA1G747M2QS-J

Taiyo Yuden

SAW FILTER; Center/Cutoff Frequency (fo/fc): 1747 MHz; Additional Features: TR; Minimum Operating Temperature: -30 Cel; JESD-609 Code: e3; No. of Functions: 1;

SAW FILTER

1

50 OHM//6.8 nH

SURFACE MOUNT

L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch)

85 Cel

-30 Cel

.5 mm

0.9

3 dB

TR

1747 MHz

e3

50 OHM//7.5 nH

1.1 mm

B39921B3407U410 by TDK

B39921B3407U410

TDK

SAW FILTER; Mounting Type: SURFACE MOUNT; Width (mm): 3.0; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Height: 1.1 mm; Output Impedance (ohm): 50 OHM;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

-40 Cel

1.1 mm

3.0

2 dB

AEC-Q200

922.5 MHz

50 OHM

3 mm

B39252B5115U410 by TDK

B39252B5115U410

TDK

SAW FILTER; No. of Terminals: 6; Additional Features: OPERATING TEMPERATURE -10 TO 85 ALSO POSSIBLE; JESD-609 Code: e4; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

CERAMIC

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

1.1 mm

3.0

3.3 dB

OPERATING TEMPERATURE -10 TO 85 ALSO POSSIBLE

2535 MHz

e4

50 OHM

3 mm

SF2160E by Murata Manufacturing

SF2160E

Murata Manufacturing

SAW FILTER; Maximum Insertion Loss: 3.2 dB; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Additional Features: TAPE AND REEL; Height: 1.38 mm;

SAW FILTER

1

SURFACE MOUNT

6

L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch)

85 Cel

-40 Cel

1.38 mm

3.13

3.2 dB

TAPE AND REEL

2330 MHz

3.13 mm

885070 by Qorvo

885070

Qorvo

SAW FILTER; Minimum Operating Temperature: -40 Cel; Packing Method: TR, 13 INCH; No. of Functions: 1; Length: 1.7 mm; No. of Terminals: 10;

SAW FILTER

1

50 OHM

TR, 13 INCH

SURFACE MOUNT

10

95 Cel

CERAMIC

-40 Cel

.5 mm

1.3

1.7 dB

2437 MHz

50 OHM

1.7 mm

TA0152B by Tai-saw Technology

TA0152B

Tai-saw Technology

SAW FILTER; Width (mm): 3; No. of Functions: 1; No. of Terminals: 6; Height: 1.3 mm; Center/Cutoff Frequency (fo/fc): 942.5 MHz;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

85 Cel

-30 Cel

1.3 mm

3

4 dB

TR, 13 INCH

942.5 MHz

50 OHM

3 mm

SF2124E by Murata Manufacturing

SF2124E

Murata Manufacturing

SAW FILTER; Height: 1.38 mm; Width (mm): 3.13; Screening Level: AEC-Q200; No. of Functions: 1; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch);

SAW FILTER

1

AEC-Q200

50 OHM

SURFACE MOUNT

6

L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch)

85 Cel

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

1.38 mm

3.13

5 dB

TAPE AND REEL

2441.8 MHz

e4

50 OHM

3.13 mm

SAFEA2G45MA0F0AR15 by Murata Manufacturing

SAFEA2G45MA0F0AR15

Murata Manufacturing

SAW FILTER; Length: 1.35 mm; Width (mm): 1.05; No. of Functions: 1; Packing Method: TR, EMBOSSED, 7 INCH; Height: .5 mm;

SAW FILTER

1

TR, EMBOSSED, 7 INCH

.5 mm

1.05

1.35 mm

B39172B9443M410 by TDK

B39172B9443M410

TDK

SAW FILTER; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch); Mounting Type: SURFACE MOUNT; Width (mm): 1.1; Maximum Operating Temperature: 75 Cel; JESD-609 Code: e4;

SAW FILTER

1

50 OHM

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

75 Cel

PLASTIC

-20 Cel

Gold (Au) - with Nickel (Ni) barrier

.4 mm

1.1

3.1 dB

OPERATING TEMPERATURE -30 TO 85 ALSO POSSIBLE

1732.5 MHz

e4

50 OHM

1.4 mm

AFS20A26-915.00-T3 by Abracon

AFS20A26-915.00-T3

Abracon

SAW FILTER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 4; No. of Functions: 1; Impedance (Input): 50 OHM; Minimum Operating Temperature: -30 Cel;

SAW FILTER

1

50 OHM

SURFACE MOUNT

4

L2.0XB1.6XH0.9 (mm)/L0.079XB0.063XH0.035 (inch)

85 Cel

-30 Cel

.9 mm

1.6

3 dB

TAPE AND REEL

915 MHz

50 OHM

2 mm

B39941-B8803-P810 by TDK

B39941-B8803-P810

TDK

SAW FILTER; Maximum Insertion Loss: 4 dB; Height: .45 mm; No. of Functions: 2; No. of Terminals: 5; Minimum Operating Temperature: -20 Cel;

SAW FILTER

2

50 OHM

SURFACE MOUNT

5

90 Cel

-20 Cel

.45 mm

0.9

4 dB

942.5 MHz

50 OHM

1.1 mm

B39871B3717U410 by TDK

B39871B3717U410

TDK

SAW FILTER; Center/Cutoff Frequency (fo/fc): 866.5 MHz; Height: 1.1 mm; Terminal Finish: Nickel/Gold (Ni/Au); No. of Functions: 1; Mounting Type: SURFACE MOUNT;

SAW FILTER

1

AEC-Q200

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

CERAMIC

-40 Cel

Nickel/Gold (Ni/Au)

1.1 mm

3.0

3.8 dB

866.5 MHz

e4

50 OHM

3 mm

B39162B3413U410 by TDK

B39162B3413U410

TDK

SAW FILTER; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); No. of Functions: 1; Maximum Insertion Loss: 2.6 dB; No. of Terminals: 6; Impedance (Input): 50 OHM;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

-40 Cel

1.1 mm

3.0

2.6 dB

AEC-Q200

1587 MHz

50 OHM

3 mm

B39921B4301F210 by TDK

B39921B4301F210

TDK

SAW FILTER; Width (mm): 1.1; Center/Cutoff Frequency (fo/fc): 915 MHz; Screening Level: AEC-Q200; Height: .4 mm; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch);

SAW FILTER

1

AEC-Q200

50 OHM

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

PLASTIC

-40 Cel

.4 mm

1.1

2.5 dB

915 MHz

50 OHM

1.4 mm

B39871B3440U410 by TDK

B39871B3440U410

TDK

SAW FILTER; Width (mm): 3.0; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Impedance (Input): 50 OHM;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

1.1 mm

3.0

3.2 dB

869 MHz

e4

50 OHM

3 mm

885075 by Qorvo

885075

Qorvo

SAW FILTER; Terminal Finish: GOLD OVER NICKEL; No. of Functions: 1; Maximum Insertion Loss: 3 dB; Packing Method: TR, 13 INCH; Length: 1.1 mm;

SAW FILTER

1

50 OHM

TR, 13 INCH

SURFACE MOUNT

5

90 Cel

-20 Cel

GOLD OVER NICKEL

.5 mm

0.9

3 dB

2350 MHz

e4

50 OHM

1.1 mm

B39871B4316P810 by TDK

B39871B4316P810

TDK

SAW FILTER; Maximum Insertion Loss: 2.9 dB; Screening Level: AEC-Q200; Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Mounting Type: SURFACE MOUNT;

SAW FILTER

1

AEC-Q200

50 OHM

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

PLASTIC

-40 Cel

.4 mm

1.1

2.9 dB

869 MHz

50 OHM

1.4 mm

TA0697A by Tai-saw Technology

TA0697A

Tai-saw Technology

SAW FILTER; Additional Features: PACK QTY 1000 ALSO AVAILABLE; No. of Terminals: 8; No. of Functions: 1; Center/Cutoff Frequency (fo/fc): 1382.24 MHz; Output Impedance (ohm): 150 OHM//30 nH;

SAW FILTER

1

150 OHM//30 nH

TR, 7/13 INCH

SURFACE MOUNT

8

85 Cel

-40 Cel

1.4 mm

3

5 dB

PACK QTY 1000 ALSO AVAILABLE

1382.24 MHz

150 OHM//30 nH

3 mm

885049 by Qorvo

885049

Qorvo

SAW FILTER; Width (mm): 1.2; Minimum Operating Temperature: -20 Cel; No. of Terminals: 5; Length: 1.4 mm; Dimensions: L1.4XB1.2XH0.46 (mm)/L0.055XB0.047XH0.018 (inch);

SAW FILTER

1

SURFACE MOUNT

5

General Purpose Filters

L1.4XB1.2XH0.46 (mm)/L0.055XB0.047XH0.018 (inch)

90 Cel

PLASTIC

-20 Cel

.46 mm

1.2

TAPE AND REEL

2350 MHz

1.4 mm

B39162B9415K610 by TDK

B39162B9415K610

TDK

SAW FILTER; JESD-609 Code: e4; Width (mm): 1.1; No. of Terminals: 5; Maximum Operating Temperature: 85 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;

SAW FILTER

1

50 OHM

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

PLASTIC

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

.4 mm

1.1

1 dB

1575.42 MHz

e4

50 OHM

1.4 mm

B39162B8313P810 by TDK

B39162B8313P810

TDK

SAW FILTER; Minimum Operating Temperature: -30 Cel; No. of Terminals: 5; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel;

SAW FILTER

SURFACE MOUNT

5

SAW Filters

85 Cel

PLASTIC

-30 Cel

AFS20A20-1227.60-T3 by Abracon

AFS20A20-1227.60-T3

Abracon

SAW FILTER; Length: 2 mm; Height: .9 mm; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -30 Cel; Impedance (Input): 50 OHM;

SAW FILTER

1

50 OHM

SURFACE MOUNT

4

L2.0XB1.6XH0.9 (mm)/L0.079XB0.063XH0.035 (inch)

85 Cel

-30 Cel

.9 mm

2.5 dB

TAPE AND REEL

1227.6 MHz

50 OHM

2 mm

B39171-B5068-H810 by TDK

B39171-B5068-H810

TDK

SAW FILTER; No. of Functions: 1; JESD-609 Code: e4; Package Material: CERAMIC; Center/Cutoff Frequency (fo/fc): 173.8 MHz; Additional Features: INSERTION LOSS INCLUDING MATCHING NETWORK;

SAW FILTER

1

50 OHM

SURFACE MOUNT

12

SAW Filters

L7.0XB5.0XH1.33 (mm)/L0.276XB0.197XH0.052 (inch)

85 Cel

CERAMIC

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

1.33 mm

5.0

11 dB

INSERTION LOSS INCLUDING MATCHING NETWORK

173.8 MHz

e4

50 OHM

7 mm

B39192B9459P810 by TDK

B39192B9459P810

TDK

SAW FILTER; Maximum Insertion Loss: 3.8 dB; Minimum Operating Temperature: -30 Cel; No. of Terminals: 5; Output Impedance (ohm): 50 OHM; Package Material: PLASTIC;

SAW FILTER

1

50 OHM

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

PLASTIC

-30 Cel

Gold (Au) - with Nickel (Ni) barrier

.4 mm

1.1

3.8 dB

1880 MHz

e4

50 OHM

1.4 mm

B39242B9413K610 by TDK

B39242B9413K610

TDK

SAW FILTER; Impedance (Input): 50 OHM//1.5 nH; Height: .4 mm; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch); Minimum Operating Temperature: -20 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;

SAW FILTER

1

50 OHM//2.5 nH

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

75 Cel

PLASTIC

-20 Cel

Gold (Au) - with Nickel (Ni) barrier

.4 mm

1.1

2.8 dB

2441.75 MHz

e4

50 OHM//1.5 nH

1.4 mm

B39461B5058Z810 by TDK

B39461B5058Z810

TDK

SAW FILTER; Minimum Operating Temperature: -30 Cel; Width (mm): 3.8; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 460 MHz; No. of Terminals: 8;

SAW FILTER

1

50 OHM

SURFACE MOUNT

8

SAW Filters

L3.8XB3.8XH1.5 (mm)/L0.15XB0.15XH0.059 (inch)

60 Cel

CERAMIC

-30 Cel

Gold (Au) - with Nickel (Ni) barrier

1.5 mm

3.8

3.2 dB

460 MHz

e4

50 OHM

3.8 mm

885062 by Qorvo

885062

Qorvo

SAW FILTER; Maximum Operating Temperature: 95 Cel; No. of Terminals: 5; Package Material: CERAMIC; Width (mm): 1.2; Packing Method: TR, 13 INCH;

SAW FILTER

1

TR, 13 INCH

SURFACE MOUNT

5

95 Cel

CERAMIC

-40 Cel

.5 mm

1.2

2.2 dB

2412 MHz

1.4 mm

AFS20A42-1575.42-T3 by Abracon

AFS20A42-1575.42-T3

Abracon

SAW FILTER; No. of Terminals: 4; Dimensions: L2.0XB1.6XH0.75 (mm)/L0.079XB0.063XH0.03 (inch); Mounting Type: SURFACE MOUNT; Height: 1 mm; Minimum Operating Temperature: -40 Cel;

SAW FILTER

1

50 OHM

SURFACE MOUNT

4

L2.0XB1.6XH0.75 (mm)/L0.079XB0.063XH0.03 (inch)

85 Cel

-40 Cel

1 mm

1.6 dB

TAPE AND REEL

1575.42 MHz

50 OHM

B39122-B4057-U510 by TDK

B39122-B4057-U510

TDK

SAW FILTER; Maximum Insertion Loss: 3.5 dB; JESD-609 Code: e4; Package Material: CERAMIC; Maximum Operating Temperature: 85 Cel; Length: 3 mm;

SAW FILTER

1

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

CERAMIC

-40 Cel

GOLD OVER NICKEL

B4057

1.1 mm

3.5 dB

1228 MHz

e4

50 OHM

3 mm

B39122B8884P810 by Rf360 Europe

B39122B8884P810

Rf360 Europe

SAW FILTER;

SAW FILTER

B39162B3913U410 by TDK

B39162B3913U410

TDK

SAW FILTER; Center/Cutoff Frequency (fo/fc): 1588 MHz; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Height: 1.1 mm; No. of Functions: 1; Maximum Operating Temperature: 85 Cel;

SAW FILTER

1

AEC-Q200

50 OHM

SURFACE MOUNT

6

SAW Filters

L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch)

85 Cel

CERAMIC

-40 Cel

Gold (Au) - with Nickel (Ni) barrier

1.1 mm

3.0

3 dB

1588 MHz

e4

50 OHM

3 mm

B39182B9402K610 by TDK

B39182B9402K610

TDK

SAW FILTER; Maximum Operating Temperature: 75 Cel; Maximum Insertion Loss: 2.4 dB; Mounting Type: SURFACE MOUNT; Length: 1.4 mm; Minimum Operating Temperature: -20 Cel;

SAW FILTER

1

150 OHM//22 nH

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

75 Cel

PLASTIC

-20 Cel

Gold (Au) - with Nickel (Ni) barrier

.4 mm

1.1

2.4 dB

1842.5 MHz

e4

50 OHM

1.4 mm

B39202-B9300-G110 by TDK

B39202-B9300-G110

TDK

SAW FILTER; JESD-609 Code: e4; Impedance (Input): 50 OHM; Dimensions: L2.0XB1.6XH0.68 (mm)/L0.079XB0.063XH0.027 (inch); Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1960 MHz;

SAW FILTER

2

150 OHM//18 nH

SURFACE MOUNT

10

L2.0XB1.6XH0.68 (mm)/L0.079XB0.063XH0.027 (inch)

75 Cel

-20 Cel

Gold (Au) - with Nickel (Ni) barrier

.68 mm

1.6

2.3 dB

CENTER FREQUENCY 1842.5 MHZ ALSO AVAILABLE

1960 MHz

e4

50 OHM

2 mm

B39242B9604P810 by TDK

B39242B9604P810

TDK

SAW FILTER; Maximum Insertion Loss: 3.3 dB; Width (mm): 1.1; Output Impedance (ohm): 50 OHM; Terminal Finish: Gold (Au); Center/Cutoff Frequency (fo/fc): 2441 MHz;

SAW FILTER

1

50 OHM

SURFACE MOUNT

5

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

-20 Cel

Gold (Au)

.4 mm

1.1

3.3 dB

2441 MHz

e4

50 OHM

1.4 mm

B39731B8811P810 by TDK

B39731B8811P810

TDK

SAW FILTER; Height: .4 mm; Length: 1.1 mm; No. of Terminals: 5; Center/Cutoff Frequency (fo/fc): 737.5 MHz; Maximum Insertion Loss: 2.6 dB;

SAW FILTER

2

50 OHM

SURFACE MOUNT

5

85 Cel

-40 Cel

.4 mm

0.9

2.6 dB

737.5 MHz

50 OHM

1.1 mm

B39871B8825P810 by TDK

B39871B8825P810

TDK

SAW FILTER; No. of Functions: 1; Width (mm): 0.9; Maximum Insertion Loss: 2.8 dB; Impedance (Input): 50 OHM//1.5 nH; Maximum Operating Temperature: 90 Cel;

SAW FILTER

1

50 OHM//1.5 nH

SURFACE MOUNT

5

90 Cel

-30 Cel

.45 mm

0.9

2.8 dB

OTHER CENTER FREQ ALSO AVAILABLE

881.5 MHz

50 OHM//1.5 nH

1.1 mm

B39881B9439M410 by TDK

B39881B9439M410

TDK

SAW FILTER; Minimum Operating Temperature: -30 Cel; Length: 1.4 mm; Output Impedance (ohm): 50 OHM; No. of Functions: 1; JESD-609 Code: e4;

SAW FILTER

5

1

50 OHM

SURFACE MOUNT

5

SAW Filters

L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)

85 Cel

PLASTIC

-30 Cel

Gold (Au) - with Nickel (Ni) barrier

.4 mm

1.1

2.5 dB

881.5 MHz

e4

50 OHM

1.4 mm