Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bus controllers are integrated circuits that are used to manage and control the flow of data and control signals between different devices in a computer system. They are commonly used in systems that have multiple buses, such as a memory bus and an I/O bus. Bus controllers ensure that data is transferred efficiently and correctly between different devices in the system.One of the primary functions of a bus controller is to manage bus arbitration. Bus arbitration is the process of resolving conflicts that occur when two or more devices on the bus attempt to access the bus at the same time. Bus controllers use various algorithms to determine which device has priority access to the bus and when other devices can access it.Another important function of bus controllers is to manage the transfer of data and control signals between devices on the bus. This involves controlling the timing and synchronization of signals, as well as error detection and correction. Bus controllers also manage other aspects of the bus, such as interrupt handling and power management.
Add filters
All
Selected
XIO2200GGW
Texas Instruments
XIO2200GGW by Texas Instruments is a bus controller with 176 terminals in a square package. It operates b/w 0-70°C, suitable for commercial applications. With power supplies of 1.5V and 3.3V, it is ideal for surface mount designs requiring fine pitch grid array packages.
S-PBGA-B176
176
70 Cel
0 Cel
PLASTIC/EPOXY
FBGA
BGA176,17X17,32
SQUARE
GRID ARRAY, FINE PITCH
1.5,3.3
Not Qualified
Bus Controllers
YES
COMMERCIAL
BALL
.8 mm
BOTTOM
PEX8112-AA66BI
Plx Technology
PEX8112-AA66BI by Plx Technology is a bus controller with 144 terminals in a square grid array package. It operates at -40 to 85°C, suitable for industrial use. With power supplies of 1.5V, 3.3V, and 3.3/5V, it features CMOS technology and consumes up to 207mA current.
S-PBGA-B144
144
85 Cel
-40 Cel
BGA
BGA144,12X12,40
GRID ARRAY
1.5,3.3,3.3/5
207 mA
CMOS
INDUSTRIAL
1 mm
CY7C68001-56PVXCT
Cypress Semiconductor
CY7C68001-56PVXCT by Cypress: 3.3V, 260mA supply, CMOS tech. Ideal for bus control apps with 56 terminals, dual position, and small outline package style. Operating temp range of 0-70°C makes it suitable for commercial use.
R-PDSO-G56
e4
3
56
SSOP
SSOP56,.4
RECTANGULAR
SMALL OUTLINE, SHRINK PITCH
260
3.3
260 mA
3.3 V
NICKEL PALLADIUM GOLD
GULL WING
.635 mm
DUAL
30
PX1011B-EL1/Q900,5
NXP Semiconductors
PX1011B-EL1/Q900,5 from NXP Semiconductors is a robust bus controller designed for automotive applications. It operates within a temperature range of 0 °C to 70 °C and supports multiple power supplies (1.2V, 2.5V, 3.3V). With an AEC-Q100 screening level and fine pitch grid array packaging, it ensures reliability in demanding environments.
S-PBGA-B81
81
BGA81,9X9,32
1.2,2.5,3.3
AEC-Q100
35 mA
PX1011BI-EL1/G,518
PX1011BI-EL1/G,518 by NXP Semiconductors is a robust bus controller designed for industrial applications. It operates within -40 °C to 85 °C and supports power supplies of 1.2V, 2.5V, and 3.3V with a max supply current of 35mA. Its fine pitch grid array package ensures efficient surface mounting in compact designs.
CP2109-A01-GMR
Silicon Labs
Silicon Labs' CP2109-A01-GMR is a 28-terminal bus controller with 3.3V supply voltage, ideal for industrial applications. This chip carrier package has a square shape and operates in temperatures ranging from -40°C to 85°C. Suitable for surface mount assembly, it is designed for use in various electronic devices requiring reliable data communication.
S-PQCC-N28
28
QCCN
LCC28,.2SQ,20
CHIP CARRIER
NO LEAD
.5 mm
QUAD
UPD720201K8-701-BAC-A
Renesas Electronics
UPD720201K8-701-BAC-A by Renesas Electronics is a 68-terminal BUS CONTROLLER with 3.3V supply, operating b/w 0-85°C. It features QUAD terminals in a SQUARE package for surface mounting applications. Ideal for UNIVERSAL SERIAL BUS peripheral ICs requiring reliable data transmission at high speeds.
S-PQCC-N68
e6
68
LCC68,.32SQ,16
OTHER
TIN BISMUTH
.4 mm
BUS CONTROLLER, UNIVERSAL SERIAL BUS
USB2640I-HZH-02
Microchip Technology
USB2640I-HZH-02 by Microchip Technology is a bus controller with a max data transfer rate of 35 MBps. It is compatible with I2C, SMBUS, SPI, and USB buses. This chip has a package style of CHIP CARRIER and operates at an industrial temperature grade of -40 to 85 °C.
I2C; SMBUS; SPI; USB
24 MHz
35 MBps
S-PQCC-N48
e3
7 mm
48
HVQCCN
LCC48,.28SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.9 mm
315 mA
3.6 V
3 V
MATTE TIN
USB2640I-HZH-02-TR
Microchip USB2640I-HZH-02-TR is a 48-terminal bus controller with 3.3V power supply, supporting I2C, SMBUS, SPI, and USB buses. It operates b/w -40 to 85 °C with a clock frequency of 24 MHz and data transfer rate up to 35 MBps. Ideal for industrial applications requiring high-speed data communication in compact designs.
USB3347-CP
The Microchip Technology USB3347-CP is a CMOS bus controller with UART and USB compatibility. It operates b/w -40 to 85 °C, with a max supply voltage of 2V and clock frequency of 26 MHz. Ideal for industrial applications requiring low power consumption and compact design in a square chip carrier package.
UART; USB
26 MHz
S-PQCC-N24
4 mm
24
HQCCN
LCC24,.16SQ,20
CHIP CARRIER, HEAT SINK/SLUG
1.8,3.3
52 mA
2 V
1.6 V
1.8 V
TUSB2046BIRHBRQ1
TUSB2046BIRHBRQ1 by Texas Instruments is a USB bus controller with 32 terminals, operating at 3.3-3.6V, supporting data transfer rates up to 12 MBps. It has a max clock frequency of 6 MHz and is ideal for industrial applications requiring USB compatibility and a compact chip carrier package style.
0
USB
6 MHz
12 MBps
S-PQCC-N32
5 mm
32
LCC32,.2SQ,20
3.3/3.6
40 mA
XIO2221ZAY
XIO2221ZAY by Texas Instruments is a bus controller with 167 terminals, operating at 0-70°C. It supports PCI, ISA, CardBus, and VGA buses with a supply voltage range of 1.35-3.3V. This low-profile IC in a square package is ideal for applications requiring IEEE 1394 drive interface standards.
PCI; ISA; CARDBUS; VGA
IEEE 1394; IEEE 1394A; IEEE 13
8
S-PBGA-B167
e1
12 mm
167
LFBGA
BGA167,14X14,32
GRID ARRAY, LOW PROFILE, FINE PITCH
1.5,1.95,3.3
1.4 mm
1.65 V
1.35 V
1.5 V
TIN SILVER COPPER
BUS CONTROLLER, PCI
FT232BL-TRAY
FTDI
FT232BL-TRAY by FTDI is a bus controller with 32 terminals, operating at 0-70°C. It supports supply voltages of 3.3/5,5V and has a clock frequency of up to 6MHz. Ideal for USB applications due to its low profile flatpack design and CMOS technology.
S-PQFP-G32
LQFP
QFP32,.35SQ,32
FLATPACK, LOW PROFILE
3.3/5,5
1.6 mm
Serial IO/Communication Controllers
5.25 V
4.35 V
5 V
FT232BQ-REEL
FTDI's FT232BQ-REEL is a 32-terminal bus controller with 3.3/5,5 V power supplies and 6 MHz clock frequency. Ideal for USB peripherals, it operates b/w 0-70°C in a compact square package style suitable for surface mount applications.
S-XQCC-N32
UNSPECIFIED
.75 mm
TUSB7340RKMT
TUSB7340RKMT by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at 1.045-1.155 V, supporting PCI and I2C buses. It has a data transfer rate of 625 MBps, clock frequency up to 50 MHz, and operates b/w 0-70°C. Ideal for applications requiring high-speed USB connectivity in compact designs.
PCI; I2C
50 MHz
625 MBps
S-PQCC-N100
9 mm
100
LCC100(UNSPEC)
1.1,3.3
1.155 V
1.045 V
1.1 V
.6 mm
TUSB8040PFP
TUSB8040PFP by Texas Instruments is a bus controller IC with 80 terminals, operating at 1.045-1.155V and up to 24MHz clock frequency. It is ideal for USB applications, featuring a quad-terminal position, CMOS technology, and I2C compatibility. With a compact square package style and nickel palladium gold finish, it offers high performance in commercial temperature grades.
I2C
S-PQFP-G80
80
HTFQFP
TQFP80,.55SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
1.2 mm
900 mA
FT201XQ-T
FTDI's FT201XQ-T is a bus controller with 16 terminals, operating at -40 to 85 °C. It supports I2C, UART, and USB buses with a data transfer rate of 0.425 MBps. The chip carrier package style has a square shape, measuring 4x4 mm in size and requiring a supply voltage of 3-5 V for usage in various applications.
I2C; UART; USB
12.02 MHz
.425 MBps
S-XQCC-N16
16
LCC16,.16SQ,25
CHIP CARRIER, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
3/5
8.65 mA
5.5 V
2.97 V
.65 mm
FT220XQ-R
FT220XQ-R by FTDI is a bus controller with 16 terminals, operating at 2.97-5.5V, supporting I2C, UART, and USB buses. It offers a data transfer rate of 0.5MBps, clock frequency up to 12.02MHz, and operates b/w -40 to 85°C. Ideal for applications requiring compact design and high-speed data communication.
.5 MBps
NOT SPECIFIED
12.3 mA
FT220XS-U
FT220XS-U by FTDI is a BUS CONTROLLER with 16 terminals, supporting I2C, UART, and USB. It operates b/w -40 to 85 °C with a clock frequency of 12.02 MHz for data transfer rate up to 0.5 MBps. This small outline package has a max seated height of 1.7526 mm and uses CMOS technology for various applications requiring bus control functionalities.
R-PDSO-G16
4.9022 mm
SSOP16,.25
1.7526 mm
3.9116 mm
FT221XS-R
FTDI's FT221XS-R is a USB bus controller with 20 terminals, operating at 3-5V. It offers data transfer rates up to 1MBps and clock frequency of 12.02MHz. Ideal for applications requiring high-speed USB communication in compact designs with surface mount technology.
1 MBps
R-PDSO-G20
8.6614 mm
20
SSOP20,.25
13.1 mA
TUSB7320IRKMR
TUSB7320IRKMR by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at -40 to 85°C. It supports PCI and I2C buses, has a data transfer rate of 625 MBps, and operates at a max clock frequency of 50 MHz. Ideal for industrial applications requiring high-speed USB connectivity in compact designs.
IT ALSO REQUIRES 3.3V SUPPLY
S-PBCC-B100
BCC
SLGA100,15X15,24
1.21 V
.99 V
BUTT
MCP2210-I/SS
MCP2210-I/SS by Microchip Technology is a small outline, shrink pitch bus controller with 20 terminals. It operates b/w -40 to 85 °C and supports SPI and USB buses. With a max clock frequency of 12 MHz, it offers data transfer rates up to 1.5 MBps for various applications requiring universal serial bus peripherals.
SPI, USB
12 MHz
1.5 MBps
7.2 mm
2
2 mm
15 mA
40
5.3 mm
MCP2210T-I/SO
MCP2210T-I/SO by Microchip: Bus Controller with 1.5 MBps data rate, 12 MHz clock frequency, and SPI/USB compatibility. Ideal for applications requiring universal serial bus communication in a compact package with dual terminals and matte tin finish.
12.8 mm
SOP
SMALL OUTLINE
2.65 mm
1.27 mm
7.5 mm
TUSB8040ARKMR
TUSB8040ARKMR by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at 24 MHz clock frequency. It supports I2C and SMBUS protocols, ideal for USB applications in commercial-grade devices. The chip carrier package has a square shape, measures 9mm x 9mm, and can operate b/w 0-70°C temperature range.
1.05-V SUPPLY MAY BE USED AS LONG AS MINIMUM SUPPLY CONDITIONS ARE MET
I2C; SMBUS
1.26 V
TUSB8040ARKMT
TUSB8040ARKMT by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at 24 MHz clock frequency. It supports I2C and SMBUS protocols, ideal for USB applications. The chip carrier package has a square shape, measures 9mm in length and width, with a max seated height of 0.8mm.
FT313HL-R
FT313HL-R by FTDI is a 64-terminal bus controller with 16-bit address and data bus width. Operating at 3.3V, it supports USB peripherals with a clock frequency of up to 24MHz. Ideal for industrial applications requiring low-profile, fine-pitch components in a compact square package.
S-PQFP-G64
10 mm
64
LFQFP
QFP64,.47SQ,20
FLATPACK, LOW PROFILE, FINE PITCH
3.63 V
FT313HL-T
FTDI's FT313HL-T is a bus controller with 16-bit address and data bus width, operating at up to 24 MHz. It features a low profile flatpack package, suitable for industrial applications requiring USB peripheral control. With a supply voltage range of 2.97V to 3.63V and wide temperature tolerance (-40°C to 85°C), it offers reliable performance in various environments.
FT313HQ-R
FTDI's FT313HQ-R is a 64-terminal bus controller with 16-bit address and data bus width. Operating at 3.3V, it supports a clock frequency of up to 24MHz. Ideal for industrial applications requiring USB connectivity in compact spaces due to its small form factor and low power consumption.
S-XQCC-N64
LCC64,.35SQ,20
FT312D-32Q1C-R
FT312D-32Q1C-R by FTDI is a 32-terminal bus controller with a max supply voltage of 3.63V and operating temperature range from -40 to 125 °C. It features a square package shape, very thin profile, and supports up to 12 MHz clock frequency. Ideal for automotive applications requiring USB peripheral ICs in compact designs.
125 Cel
LCC32,.27SQ,25
AUTOMOTIVE
TUSB8040A1RKMR
TUSB8040A1RKMR by Texas Instruments is a BUS CONTROLLER IC with 100 terminals, operating at 24 MHz clock frequency. It supports I2C and SMBUS bus compatibility, with supply voltages of 1.1V and 3.3V. Ideal for applications requiring USB connectivity in commercial-grade temperature environments.
XIO2213BIZAY
XIO2213BIZAY by Texas Instruments is a bus controller with 167 terminals, operating at -40 to 85°C. It supports PCI, ISA, CardBus, and VGA buses with an external data bus width of 8 bits. The package is a low-profile grid array measuring 12mm x 12mm and has a terminal pitch of 0.8mm for industrial applications.
USB5537B-5000AKZETR
Standard Microsystems
USB5537B-5000AKZETR by Standard Microsystems is a BUS CONTROLLER IC with 72 terminals, operating at 25 MHz clock frequency. It supports I2C and SMBUS bus compatibility, ideal for UNIVERSAL SERIAL BUS applications. The chip carrier package has a very thin profile, suitable for commercial-grade temperature environments.
ALSO OPRATES AT 3.3 V SUPPLY
25 MHz
S-XQCC-N72
72
1.31 V
1.22 V
1.25 V
PCA9541AD/03,112
PCA9541AD/03,112 by NXP is a CMOS bus controller ideal for I2C applications. It operates b/w 2.3V and 5.5V, with a max temp of 85 °C and features a compact 16-terminal SO package. Perfect for industrial environments requiring reliable data communication.
9.9 mm
1
1.75 mm
2.3 V
3.9 mm
BUS CONTROLLER, I2C
PCA9541AD/03,118
PCA9541AD/03,118 by NXP Semiconductors is a bus controller with 16 terminals and a rectangular package shape. It operates at a supply voltage range of 2.3V to 5.5V and has an industrial temperature grade of -40°C to 85°C. This IC is commonly used for I2C communication in various applications.
UPD720114GA-YEU-AT
Renesas Electronics UPD720114GA-YEU-AT is a 48-terminal BUS CONTROLLER IC with CMOS technology. It operates at 3.14-3.46 V, up to 30 MHz clock frequency, and -40 to 85°C temperature range. Ideal for USB applications due to its thin profile, fine pitch package style in a square shape.
30 MHz
S-PQFP-G48
TFQFP
FLATPACK, THIN PROFILE, FINE PITCH
3.46 V
3.14 V
USB2534-1080AEN-TR
USB2534-1080AEN-TR by Microchip Tech is a BUS CONTROLLER IC with 36 terminals, CMOS tech, and 24 MHz clock freq. Ideal for I2C, SMBUS, UART, USB applications due to its low profile (1mm), quad terminal position, and 3.3V nominal voltage. Operating temp range: 0-70°C.
IT ALSO REQUIRES 1.2 V NOMINAL SUPPLY VOLTAGE
I2C; SMBUS; UART; USB
S-XQCC-N36
6 mm
36
LCC36,.24SQ,20
TS 16949
USB2534-1080AEN
The Microchip Technology USB2534-1080AEN is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, UART, and USB buses. It has a clock frequency of up to 24 MHz and operates b/w 0-70°C. This SQUARE chip carrier is ideal for various applications requiring bus control in commercial-grade environments.
CP2109-A01-GM
CP2109-A01-GM by Silicon Labs is a BUS CONTROLLER with 28 terminals, operating at 3-3.6V. It features a max clock frequency of 48 MHz and is suitable for UNIVERSAL SERIAL BUS applications in INDUSTRIAL settings due to its compact SQUARE package style and -40 to 85 °C temperature range.
48 MHz
S-XQCC-N28
USB5534B-4100JZXTR
Microchip Technology's USB5534B-4100JZXTR is a BUS CONTROLLER IC with 64 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, SPI, and USB buses with a data transfer rate of 625 MBps. Ideal for applications requiring high-speed data communication in commercial temperature range.
ALSO OPERATES AT 3.3 V SUPPLY
S-PQCC-N64
1.25,3.3
USB2533-1080AEN-TR
USB2533-1080AEN-TR by Microchip Technology is a BUS CONTROLLER IC with 36 terminals, operating at 24 MHz clock frequency. It supports I2C, SMBUS, and USB bus compatibility with a data transfer rate of 0.0125 MBps. Ideal for applications requiring low-profile components in commercial temperature environments.
I2C; SMBUS; USB
.0125 MBps
S-PQCC-N36
1.2 V
USB2533I-1080AENTR
USB2533I-1080AENTR by Microchip: 36-terminal chip carrier with 24MHz clock, 0.0125MBps data rate. Ideal for industrial applications requiring USB, I2C, and SMBus compatibility at -40 to 85°C. Features CMOS tech and matte tin finish in a compact 6x6mm package.
PCI2250PGFG4
PCI2250PGFG4 by Texas Instruments is a 32-bit bus controller with a max clock frequency of 33 MHz. It operates b/w 0-70°C and supports CardBus, ISA, and VGA buses. The package style is flatpack with low profile and fine pitch terminals, making it suitable for commercial-grade applications.
DEVICE HAVING 32-BIT MULTIPLEXED PRIMARY AND SECONDARY ADDRESS AND DATA BUS.
CARDBUS; ISA; VGA
33 MHz
S-PQFP-G176
24 mm
CY7C63513C-PVXCT
CY7C63513C-PVXCT by Cypress: 8-bit BUS CONTROLLER with 256B RAM, USB connectivity, and OTPROM ROM. Ideal for applications requiring DAC channels, DMA support, and 32 I/O lines. Operating at 12 rpm speed with Nickel Palladium Gold finish for robust performance.
NO
256
8192
OTPROM
12 rpm
POR, TIMER, WDT
CY7C63613C-SXCT
CY7C63613C-SXCT by Cypress Semiconductor is an 8-bit bus controller with 8192 ROM words and 256 RAM bytes. It features USB connectivity, DMA channels, and peripherals like POR and TIMER. Ideal for applications requiring a universal serial bus interface with on-chip programmable OTPROM.
PCI1250GFN
PCI1250GFN by Texas Instruments is a 32-bit bus controller with 256 terminals, operating at up to 33.33 MHz. It is a PCMCIA peripheral IC compatible with PCI buses, featuring a temperature range of 0-70°C. The package style is grid array, suitable for various commercial applications.
PCI
33.33 MHz
S-PBGA-B256
27 mm
2.32 mm
BUS CONTROLLER, PCMCIA
PCI1251AGFN
PCI1251AGFN by Texas Instruments is a bus controller with 32-bit address and data bus width. It operates at 3-3.6V, supports 130MBps data transfer rate, and has a max clock frequency of 33MHz. Ideal for PCMCIA applications due to its PCI compatibility and CMOS technology.
130 MBps
BGA256,20X20,50
3.3,3.3/5
PCI2030PGF
PCI2030PGF by Texas Instruments is a 32-bit bus controller with 176 terminals, operating at 33 MHz. It has a supply voltage range of 3-3.6 V and supports PCI peripheral ICs. Ideal for commercial applications requiring high-speed data transfer in compact spaces.
QFP176,1.0SQ,20
TUSB3410IRHBT
TUSB3410IRHBT by Texas Instruments is a 32-terminal bus controller with a max data transfer rate of 1.5 MBps and operates at temperatures ranging from -40 to 85 °C. It is ideal for industrial applications requiring USB peripheral ICs, supporting I2C bus compatibility and RS232/RS485 drive interfaces.
RS232; RS485
© 2023 All rights reserved
