Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Digital counters are electronic circuits that can be used to count and keep track of the number of events or occurrences in a digital system. They are commonly used in digital systems to generate timing signals, to control sequencing, and to implement digital control functions.Digital counters can be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs). They can also be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops.Digital counters can be classified into two main types: synchronous counters and asynchronous counters. Synchronous counters use a common clock signal to synchronize the operation of all the flip-flops in the counter. Asynchronous counters, on the other hand, do not use a common clock signal and rely on the propagation delay of the flip-flops to sequence their operation.Digital counters can also be classified based on their counting sequence. They can count up, down, or both up and down, depending on the application. Up counters increment the count each time an input pulse is received, while down counters decrement the count each time an input pulse is received. Up-down counters can count both up and down, depending on the direction of the input signal.Digital counters can be used in various applications, including frequency division, time delay generation, event counting, and sequence control. They can be used to generate timing signals for clocking digital circuits, to control the sequencing of operations in a digital system, and to implement digital control functions, such as shift registers and sequence generators.
Add filters
All
Selected
MC74HC161ADTR2G
Onsemi
MC74HC161ADTR2G by Onsemi is a 4-bit digital counter with 220 ns propagation delay and 125°C max operating temp. Ideal for military applications, it operates synchronously with a max frequency of 20 MHz at nominal voltage of 3V.
UP
HC/UH
R-PDSO-G16
e4
5 mm
50 pF
BINARY COUNTER
20000000 Hz
4 Amp
SYNCHRONOUS
1
4
16
125 Cel
-55 Cel
PLASTIC/EPOXY
TSSOP
TSSOP16,.25
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
TR
260
2/6
220 ns
Not Qualified
1.2 mm
Counters
6 V
2 V
3
YES
CMOS
MILITARY
NICKEL PALLADIUM GOLD
GULL WING
.65 mm
DUAL
30
POSITIVE EDGE
4.4 mm
MC74HC160ADG
MC74HC160ADG by Onsemi is a 4-bit digital counter with 16 terminals, operating at a supply voltage range of 2-6V. It features a propagation delay of 310ns, max frequency of 20MHz, and operates in synchronous mode. Ideal for military-grade applications requiring precise counting and timing functions.
e3
9.9 mm
DECADE COUNTER
SOP
SOP16,.25
SMALL OUTLINE
RAIL
310 ns
1.75 mm
4.5
MATTE TIN
1.27 mm
3.9 mm
MC74HC160ADTR2G
MC74HC160ADTR2G by Onsemi is a 4-bit digital counter with 16 terminals. It operates at a supply voltage range of 2-6V and has a max frequency of 20MHz. Ideal for military-grade applications requiring synchronous operation and positive edge triggering.
NLV74HC393ADR2G
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
R-PDSO-G14
8.65 mm
25000000 Hz
ASYNCHRONOUS
2
14
SOP14,.25
AEC-Q100
5
NEGATIVE EDGE
MC74HC160ADTG
MC74HC160ADTG by Onsemi is a 4-bit digital counter with a max frequency of 20MHz. Operating b/w -55 to 125 °C, it has a supply voltage range of 2-6V and load capacitance of 50pF. Ideal for military applications, this CMOS technology-based counter triggers on positive edge for synchronous operation.
NLV14024BDG
NLV14024BDG by Onsemi is a 7-bit digital counter with 2000 ns propagation delay at 5V. It operates in the temperature range of -55 to 125 °C and has a max frequency of 1MHz. Ideal for military applications, it features AEC-Q100 screening level and GULL WING terminal form.
INPUT PULSE FREQUENCY 4 MEGA HZ
4000/14000/40000
1000000 Hz
7
5/15
2000 ns
18 V
3 V
NLV14024BDR2G
NLV14024BDR2G by Onsemi is a 7-bit digital counter with 2000 ns propagation delay at 5V. It operates in the temperature range of -55 to 125 °C and supports load capacitance of 50 pF. Ideal for military applications, it features negative edge trigger type and CMOS technology for up to 1MHz frequency.
NLV14040BDG
NLV14040BDG by Onsemi is a 12-bit digital counter with 3250 ns propagation delay. Operating temperature range from -55 to 125 °C, suitable for military applications. Features include CMOS technology, AEC-Q100 screening level, and asynchronous operation mode.
1500000 Hz
12
3250 ns
NLV14518BDWR2G
NLV14518BDWR2G by Onsemi is a CMOS digital counter with 4-bit resolution. It operates synchronously with a propagation delay of 560 ns and supports positive edge trigger type. Suitable for military applications, it has a temperature range from -55 to 125 °C and can handle supply voltages from 3V to 18V.
10.3 mm
560 ns
2.65 mm
7.5 mm
NLV14536BDWG
NLV14536BDWG by Onsemi is a 4-bit digital counter with 16 terminals. Operating b/w -55 to 125 °C, it has a propagation delay of 14000 ns and operates at a supply voltage range of 3-18 V. Ideal for military applications, this CMOS technology-based device features synchronous operation and positive edge trigger type.
14000 ns
Counter
NLV14536BDWR2G
NLV14536BDWR2G by Onsemi is a 4-bit digital counter with 14000 ns propagation delay. Operating b/w -55 to 125 °C, it has a supply voltage range of 3-18 V. Ideal for military applications, this CMOS technology device features positive edge trigger and synchronous operation mode.
NLV14569BDWR2G
NLV14569BDWR2G by Onsemi is a CMOS digital counter with 4 bits, operating at 5V. It has a propagation delay of 1200ns and can handle frequencies up to 2.1MHz. Ideal for military applications due to its AEC-Q100 screening level and wide temperature range from -55 °C to 125°C.
DOWN
2100000 Hz
SOP16,.4
1200 ns
Prescaler/Multivibrators
NLV74HC4040ADR2G
NLV74HC4040ADR2G by Onsemi is a 12-bit digital counter with 5V supply, operating from -55 to 125 °C. It features negative edge trigger, up count direction, and max frequency of 25MHz. Ideal for military applications requiring small outline package and AEC-Q100 screening level.
NLV14060BDG
NLV14060BDG by Onsemi is a 14-bit digital counter with 740ns propagation delay. Operating b/w -55 to 125 °C, it has a supply voltage range of 3-18V. Ideal for military applications, this CMOS technology device features negative edge trigger and AEC-Q100 screening level.
740 ns
NLV14060BDTR2G
NLV14060BDTR2G by Onsemi is a 14-bit digital counter with 740ns propagation delay. Operating b/w -55 to 125 °C, it has a supply voltage range of 3-18V and AEC-Q100 screening for automotive applications. The small outline package with dual terminals and Gull Wing form makes it suitable for military-grade asynchronous count-up operations.
HCF40103BEY
STMicroelectronics
HCF40103BEY by STMicroelectronics is an 8-bit digital counter with load/preset input, operating at 5V. It has a propagation delay of 600ns and can handle a max frequency of 700kHz. Ideal for military-grade applications requiring synchronous operation and down count direction.
TCO OUTPUT; RESET TO MAX COUNT
R-PDIP-T16
700000 Hz
8
DIP
DIP16,.3
IN-LINE
TUBE
600 ns
5.1 mm
20 V
NO
THROUGH-HOLE
2.54 mm
7.62 mm
2.4 MHz
HCF40161BEY
HCF40161BEY by STMicroelectronics is a 4-bit digital counter with load/preset input, operating at 5V. It has a propagation delay of 400ns and can handle load capacitance of 50pF. Ideal for military applications due to its temperature grade and synchronous operation mode.
TCO OUTPUT
2000000 Hz
400 ns
8 MHz
HCF4017BEY
HCF4017BEY by STMicroelectronics is a 10-bit digital counter with 650 ns propagation delay. Operating at 5V, it has a max frequency of 2.5 MHz and can handle load capacitance of 50 pF. Ideal for military applications due to its temperature grade and synchronous operation mode.
JOHNSON COUNTER WITH 10 DECODED OUTPUTS; TCO OUTPUT; GATED CLOCK
RING COUNTER
2500000 Hz
10
650 ns
5.5 MHz
HCF4018BEY
HCF4018BEY by STMicroelectronics is a 5-bit digital counter with load/preset input, operating at 5V. With a propagation delay of 400ns and max frequency of 3MHz, it's ideal for military-grade applications requiring synchronous operation. The package style is in-line with through-hole terminals and a temperature range from -55 to 125 °C.
JOHNSON COUNTER, PROGRAMMABLE WITH EXT CONNECTIONS; SCHMITT TRIGGER ON CLOCK INPUT; INVERTED OUTPUTS
3000000 Hz
8.5 MHz
HCF40193BEY
HCF40193BEY by STMicroelectronics is a 4-bit digital counter with synchronous operation mode and bidirectional count direction. It operates at a max frequency of 5.5 MHz, suitable for military-grade applications with a temperature range from -55 to 125 °C. The package style is in-line, featuring 16 terminals and a propagation delay of 500 ns.
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
BIDIRECTIONAL
500 ns
HCF4020BEY
HCF4020BEY by STMicroelectronics is a 14-bit digital counter with a propagation delay of 360 ns. It operates on a supply voltage range of 3-20V and has a max frequency of 3.5 MHz. Ideal for military-grade applications requiring asynchronous count direction in CMOS technology.
OUTPUTS FROM 12 STAGES AVAILABLE
3500000 Hz
360 ns
12 MHz
HCF4022BEY
HCF4022BEY by STMicroelectronics is an 8-bit digital counter with a propagation delay of 650 ns. Operating at a max frequency of 2.5 MHz, it has a supply voltage range of 3-20 V and is ideal for military-grade synchronous applications requiring precise counting capabilities.
JOHNSON COUNTER WITH 8 DECODED OUTPUTS
HCF4024BEY
HCF4024BEY by STMicroelectronics is a 7-bit digital counter with load/preset input, operating at 5V supply voltage. With a propagation delay of 360ns and max frequency of 3.5MHz, it is ideal for military-grade applications requiring asynchronous operation in temperatures ranging from -55 °C to 125°C.
R-PDIP-T14
DIP14,.3
HCF4029BEY
HCF4029BEY by STMicroelectronics is a 4-bit digital counter with synchronous operation, positive edge trigger, and bidirectional count direction. It operates at a max frequency of 5.5 MHz with a propagation delay of 500 ns. Ideal for military-grade applications requiring precise counting in a compact rectangular package.
BINARY/BCD COUNT OPTION; TCO OUTPUT; COUNT ENABLE INPUT
HCF4040BEY
HCF4040BEY by STMicroelectronics is a 12-bit digital counter with 360 ns propagation delay. Operating at 5V, it has a max frequency of 3.5 MHz and can handle load capacitance of 50 pF. Ideal for military applications due to its temperature grade and asynchronous operation mode.
3/15
HCF4060BEY
HCF4060BEY by STMicroelectronics is a 14-bit digital counter with a propagation delay of 740 ns. Operating at temperatures from -55 to 125 °C, it has a max frequency of 3.5 MHz and supports supply voltages from 3V to 20V. Ideal for military applications, this CMOS technology-based device features negative edge triggering and asynchronous operation.
OUTPUTS FROM 10 STAGES AVAILABLE; BUILT-IN OSCILLATOR; OSCILLATOR DISABLED BY CLEAR INPUT
HCF4518BEY
HCF4518BEY by STMicroelectronics is a 16-terminal digital counter with 4-bit resolution and operates on a nominal voltage of 5V. It features a propagation delay of 560ns, synchronous operation mode, and can handle load capacitance up to 50pF. Ideal for military-grade applications requiring precise counting and triggering functions at temperatures ranging from -55°C to 125°C.
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
4 MHz
HCF4520BEY
HCF4520BEY by STMicroelectronics is a 4-bit digital counter with 2 functions, operating at a max frequency of 1.5MHz. It has a propagation delay of 560ns and operates in synchronous mode. Ideal for military-grade applications requiring precise counting and timing functions within the temperature range of -55 to 125 °C.
HCF4527BEY
HCF4527BEY by STMicroelectronics is a 4-bit digital counter with synchronous operation mode and negative edge trigger type. It has a propagation delay of 220 ns, operates within a temperature range of -55 to 125 °C, and requires a nominal voltage of 5 V. This component is commonly used in military-grade applications due to its CMOS technology and through-hole terminal form.
BCD RATE MULTIPLIER; TCO OUTPUT; COUNT ENABLE, INHIBIT AND CASCADE INPUTS; COMPLEMENTARY OUTPUTS
3.5 MHz
SN74F193AN
Texas Instruments
SN74F193AN by Texas Instruments is a 4-bit digital counter with synchronous operation and positive edge trigger. It operates at a supply voltage of 5V, has a propagation delay of 13ns, and can handle load capacitance up to 50pF. This TTL technology device is commonly used in applications requiring bidirectional counting with a max frequency of 85MHz.
F/FAST
19.305 mm
70 Cel
0 Cel
NOT SPECIFIED
54 mA
13 ns
5.08 mm
5.5 V
4.5 V
TTL
COMMERCIAL
85 MHz
M74HC390B1R
M74HC390B1R by STMicroelectronics is a digital counter with 3 bits, operating at a max frequency of 28MHz. It has a propagation delay of 420ns and operates in asynchronous mode. Ideal for military applications due to its temperature grade and nickel palladium gold terminal finish.
DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS
28000000 Hz
420 ns
33 MHz
M74HC4017B1R
M74HC4017B1R by STMicroelectronics is a 10-bit digital counter with a max frequency of 20MHz. It operates on a nominal voltage of 4.5V and has a propagation delay of 295ns. Ideal for military-grade applications, this CMOS technology-based counter features positive edge trigger type and synchronous operation mode.
295 ns
20 MHz
M74HC4060B1R
M74HC4060B1R by STMicroelectronics is a 14-bit digital counter with a max frequency of 20MHz. It operates in asynchronous mode, with a propagation delay of 450ns and can handle load capacitance of 50pF. Ideal for military-grade applications requiring precise counting and timing functions.
450 ns
24 MHz
M74HC590B1R
M74HC590B1R by STMicroelectronics is an 8-bit digital counter with a max frequency of 26 MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 250 ns. Ideal for military-grade applications requiring asynchronous operation and positive edge trigger type.
TCO OUTPUT; REGISTERED OUTPUTS
22000000 Hz
6 Amp
3-STATE
250 ns
26 MHz
M74HC40103B1R
M74HC40103B1R by STMicroelectronics is an 8-bit digital counter with a max frequency of 13MHz. It operates synchronously with a propagation delay of 280ns and supports load or preset inputs. Ideal for military applications, it has a temperature range from -55 to 125 °C and requires a nominal voltage of 4.5V.
13000000 Hz
280 ns
15 MHz
M74HC161B1R
M74HC161B1R by STMicroelectronics is a 4-bit synchronous digital counter with load/preset input. Operating at 2-6V, it has a max frequency of 21MHz and propagation delay of 190ns. Ideal for military applications due to its temperature grade and through-hole terminal form.
21000000 Hz
190 ns
25 MHz
M74HC191B1R
M74HC191B1R by STMicroelectronics is a 4-bit digital counter with synchronous operation, positive edge trigger, and bidirectional count direction. It operates at a max frequency of 20MHz with a propagation delay of 270ns. Ideal for military applications due to its temperature grade and load capacitance of 50pF.
270 ns
M74HC163B1R
M74HC163B1R by STMicroelectronics is a 4-bit digital counter with synchronous operation and positive edge trigger. It operates at a max frequency of 21MHz, has a propagation delay of 190ns, and can handle load capacitance of 50pF. This CMOS technology device is ideal for military-grade applications requiring precise counting capabilities.
M74HC4040B1R
M74HC4040B1R by STMicroelectronics is a 12-bit digital counter with a max frequency of 20MHz. Operating in asynchronous mode, it has a propagation delay of 220ns and operates within a temperature range of -55 to 125 °C. Ideal for military-grade applications requiring precise counting capabilities.
M74HC4024B1R
M74HC4024B1R by STMicroelectronics is a 7-bit digital counter with a max frequency of 28MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 180ns. Ideal for military-grade applications, it features negative edge triggering and CMOS technology in an inline package style.
180 ns
34 MHz
M74HC393B1R
STMicroelectronics' M74HC393B1R is a CMOS digital counter with 4-bit resolution and 2 functions. Operating b/w -55 to 125 °C, it has a max frequency of 28 MHz and propagation delay of 345 ns. Ideal for military applications due to its through-hole terminal form and asynchronous operation mode.
345 ns
SN74ALS568AN
SN74ALS568AN by Texas Instruments is a 4-bit digital counter with synchronous operation and positive edge trigger. It has a propagation delay of 16 ns, operates at 5V supply voltage, and features 3-STATE output characteristics. This TTL technology device is commonly used in applications requiring bidirectional counting with a max frequency of 20 MHz.
TCO OUTPUT; CLOCKED CARRY OUTPUT
ALS
R-PDIP-T20
24.325 mm
20
DIP20,.3
32 mA
16 ns
SN54AS869JT
SN54AS869JT by Texas Instruments is an 8-bit digital counter with a propagation delay of 35ns and operates at a max frequency of 40MHz. It is designed for military-grade applications, featuring synchronous operation mode and bidirectional count direction. The package style is in-line with through-hole terminal form, making it suitable for high-speed TTL technology circuits.
TCO OUTPUT; COUNT ENABLE INPUTS
AS
R-GDIP-T24
e0
32.005 mm
40000000 Hz
20 Amp
24
CERAMIC, GLASS-SEALED
DIP24,.3
195 mA
TIN LEAD
40 MHz
SN74ALS869DWR
SN74ALS869DWR by Texas Instruments is an 8-bit digital counter with a propagation delay of 16 ns and operates on a nominal voltage of 5V. It features load/preset inputs, positive edge trigger type, and bidirectional count direction. Ideal for applications requiring synchronous operation in commercial temperature grades.
R-PDSO-G24
15.4 mm
8 Amp
SOP24,.4
45 mA
35 MHz
SN74AS869DW
SN74AS869DW by Texas Instruments is an 8-bit digital counter with a propagation delay of 35ns at 5V. It operates in synchronous mode, has a max frequency of 45MHz, and is ideal for bidirectional counting applications. This small outline package features positive edge triggering and Gull Wing terminals for efficient surface mounting.
45000000 Hz
15 ns
45 MHz
SN74ALS867ADWR
SN74ALS867ADWR by Texas Instruments is an 8-bit digital counter with a propagation delay of 16 ns, operating at a supply voltage range of 4.5V to 5.5V. It features synchronous operation and bidirectional count direction, making it ideal for applications requiring fast and accurate counting in commercial temperature environments.
SN74AS867NT
SN74AS867NT by Texas Instruments is an 8-bit digital counter with a propagation delay of 15 ns and operates on a nominal voltage of 5V. It features synchronous operation, bidirectional count direction, and a max clock frequency of 50 MHz. This TTL technology device is commonly used in applications requiring precise counting and timing functions.
R-PDIP-T24
31.64 mm
50 MHz
SN74AS867DWR
SN74AS867DWR by Texas Instruments is an 8-bit digital counter with a propagation delay of 15ns, operating at a max frequency of 50MHz. It features synchronous operation and positive edge triggering, suitable for bidirectional counting applications. This small outline package has a nominal voltage of 5V and can operate in commercial temperature grades from 0 to 70°C.
© 2023 All rights reserved
