Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC74HC161ADTR2G by Onsemi is a 4-bit digital counter with 220 ns propagation delay and 125°C max operating temp. Ideal for military applications, it operates synchronously with a max frequency of 20 MHz at nominal voltage of 3V.
Median Price
$0.187
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$0.066
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.196
Rochester
$0.211
$0.175
$0.157
DigiKey
$0.260
Flip Electronics (Authorized)
Mouser Electronics
$0.160
Chip1Stop
$0.178
Digiode
$0.164
Chip Stock
ComSIT Distribution GmbH
Vyrian
Flip Electronics
Corphita
$0.156
Corohmni
Microchip USA
$1.330
$1.321
AZTECH Wire
$2.040
$1.960
$1.920
$1.880
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Perfect Parts
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
UHIMA Technologies
TANS Electronics
Plastic/Epoxy material provides durability and protection to the internal components of the digital counter, ensuring a longer lifespan.
Surface mount capability allows for easy installation on circuit boards, saving space and simplifying the manufacturing process.
4 bits provide sufficient counting capability for many applications, making this digital counter versatile and suitable for a wide range of uses.
Operating at a low nominal supply voltage of 3V makes this digital counter energy-efficient and compatible with a variety of power sources.
With a high maximum operating temperature of 125°C, this digital counter can withstand elevated temperatures in harsh environments.
Digital Counters MC74HC161ADTR2G attributes and parameters. Explore more Digital Counters devices from Onsemi
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Operation Mode:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
MC74HC161ADTR2G Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Change 16/Feb/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Formosa Microsemi
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148WS
Fairchild Semiconductor
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
BAV99WT1G
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
CD4024BE
Intersil
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
CD4059AM96
Texas Instruments
CD4059AM96 by Texas Instruments is a CMOS digital counter with 24 terminals, operating at 5V supply voltage. It features a propagation delay of 360ns and can handle frequencies up to 1.5MHz. Ideal for military applications due to its wide temperature range (-55°C to 125°C) and bidirectional count direction capability.
HEF4017BT
NXP Semiconductors
HEF4017BT by NXP Semiconductors is a 10-bit digital counter with 280 ns propagation delay and operates at a max frequency of 6 MHz. It is ideal for industrial applications, featuring a supply voltage range of 3-15V, positive edge trigger type, and synchronous operation mode. The small outline package with dual terminal position makes it suitable for compact designs requiring precise counting capabilities.
CD74HCT40103M96G4
CD74HCT40103M96G4 by Texas Instruments is an 8-bit digital counter with a propagation delay of 85 ns at 5V. It operates in synchronous mode, has a max frequency of 9 MHz, and is suitable for military-grade applications requiring down count direction.
SN74LV8154MPWREP
SN74LV8154MPWREP by Texas Instruments is a 16-bit digital counter with a propagation delay of 27ns and operates at a nominal voltage of 3.3V. It features a max frequency of 25MHz, suitable for military-grade applications requiring synchronous operation and positive edge triggering in compact designs.
CD40192BNSRG4
CD40192BNSRG4 by Texas Instruments is a 4-bit digital counter with synchronous operation, positive edge trigger, and bidirectional count direction. It operates at a max frequency of 2MHz with a propagation delay of 500ns. This CMOS technology device is ideal for military applications requiring a small outline package and dual terminal position.
CD4029BE
Rca Solid State
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC191M96E4
CD74HC191M96E4 by Texas Instruments is a 4-bit digital counter with a propagation delay of 37ns. It operates at a nominal voltage of 4.5V and has a max frequency of 20MHz. Ideal for military-grade applications, it features positive edge trigger type and bidirectional count direction.
CD74HC4040M96
Harris Semiconductor
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD4026BE
CD4026BE by Texas Instruments is a 5-bit digital counter with 250 ns propagation delay and operates at 5V. It has a max frequency of 2.5 MHz, ideal for synchronous counting applications in military-grade environments. The package style is in-line with through-hole terminal form, making it suitable for high-speed circuit designs.
SNJ54LS90J
SNJ54LS90J by Texas Instruments is a TTL digital counter with 3 bits, 50 ns propagation delay, and 2 functions. It operates at a supply voltage of 5V and has a max frequency of 16 MHz. Ideal for military applications due to MIL-PRF-38535 screening level and negative edge trigger type.
CD4017BM96
CD4017BM96 by Texas Instruments is a 10-bit digital counter with 270 ns propagation delay, operating at 5V. It features positive edge trigger, synchronous operation mode, and up count direction. Ideal for applications requiring high frequency counting in military-grade environments.
CD74HC4017E
General Electric Solid State
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74HC4040PWRG4
SN74HC4040PWRG4 by Texas Instruments is a 12-bit digital counter with 190 ns propagation delay and 50 pF load capacitance. It operates at a supply voltage range of 2-6V, suitable for industrial applications requiring up to 22 MHz frequency counting in a compact SMD package.
CD74HC93ME4
CD74HC93ME4 by Texas Instruments is a digital counter with 3 bits, operating at a max frequency of 24 MHz. It has a propagation delay of 370 ns and can handle load capacitance up to 50 pF. This small outline package is ideal for military-grade applications requiring asynchronous operation and negative edge triggering.
74HC4060D-Q100,118
BINARY COUNTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MC14516BDG
Onsemi
MC14516BDG by Onsemi is a 4-bit digital counter with 630 ns propagation delay and 1.75 mm seated height. It operates at a max frequency of 1.5 MHz, suitable for military-grade applications requiring bidirectional count direction and synchronous operation. The package is small outline with gull wing terminals, making it ideal for space-constrained designs.
SN74LV161APWR
SN74LV161APWR by Texas Instruments is a digital counter with 4 bits and operates at a nominal voltage of 2.5V. It has a propagation delay of 11.5ns and can handle a max frequency of 50MHz. This IC is commonly used in industrial applications requiring synchronous counting capabilities.
CD4017BF3A
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC4017PW
CD74HC4017PW by Texas Instruments is a 10-bit digital counter with a propagation delay of 54ns. It operates at a supply voltage range of 2-6V and has a max frequency of 20MHz. Ideal for military-grade applications, it features positive edge triggering and synchronous operation in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC74HC4060ADG
MC74HC4060ADTR2G
MC74HC4060ADTR2G by Onsemi is a 14-bit digital counter with 3V nominal voltage, 50pF load capacitance, and 4A max I (ol). It is used in military-grade applications for asynchronous counting operations with a max frequency of 25MHz.
MC74HC4060ADR2G
MC74HC4040ADR2G
MC74HC4040ADG
MC74HC393ADG
Rochester Electronics
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MC74HC390DR2
DECADE COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC4040DG
MC74AC4040DG by Onsemi is a 12-bit digital counter with 3.3V nominal voltage and 50pF load capacitance. It operates in industrial temperature range, has 14ns propagation delay, and supports up to 100MHz frequency. Ideal for applications requiring asynchronous operation and negative edge trigger type in small outline packages.
MC74HC4060ADTG
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MC74AC161DG
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MC74HC390D
The Onsemi MC74HC390D is a digital counter with 2 functions and 3 bits. It operates at a nominal voltage of 4.5V and has a max frequency of 18MHz. This small outline package is commonly used in military applications for asynchronous counting tasks.
MC74AC4040DR2G
MC74AC4040DR2G by Onsemi is a 12-bit digital counter with 3.3V nominal voltage, 14ns propagation delay, and 100MHz max frequency. Ideal for industrial applications requiring asynchronous operation and negative edge trigger type in a small outline package.
MC74HC390ANG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved