Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CD40102BE by Texas Instruments is an 8-bit digital counter with a propagation delay of 260 ns at 5V. It operates in synchronous mode, has a max frequency of 700 kHz, and is suitable for military-grade applications due to its temperature range of -55°C to 125°C.
Median Price
$1.715
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.734
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.350
$0.811
$0.766
Newark
$2.080
$1.370
$1.330
DigiKey
$2.120
$1.276
$1.124
$1.063
Mouser Electronics
$1.270
$1.120
$1.060
Element14
$2.690
$1.610
$1.410
Rochester
$1.100
$0.984
Verical
$1.250
$1.119
TEDSS.com
$0.500
American Microsemiconductor Inc.
$0.570
Digiode
$0.697
Nova Conductors
$0.713
TME
$1.130
$0.730
$0.710
Component Electronics Inc.
$1.150
$0.870
$0.750
Vyrian
Connector Distribution Corp
Right Parts Inc.
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Halfin
Electronics Depot
ComSIT Distribution GmbH
DigiKey Marketplace
Pride Electronics
R&J Components
ECAB
Bristol Electronics
Manoshevitz Elec. Sales
Fibra_Brandt Electronic GMBH
Semi Source
Kronex Distribution GmbH
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
PC Components Company LLC
Prism Electronics
Resion
MISTER SPROCKETS
LWI Electronics Inc
Sunrise Surplus Inc.
Component Stockers USA
$0.580
$0.700
Corphita
$0.661
Argo Parts USA
$0.692
Continental Prestige Electronics
$0.904
$0.715
$0.514
Parana Technologies
$9.103
$9.755
DigiPath Technology Company
$10.023
ChromeModa Solutions
$10.228
$8.387
IDEA Electronic Components Group
$9.717
$9.205
Microchip USA
$10.600
$10.530
$10.500
$10.460
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
A-Z Elektronik GmbH
Infinite Electronics LLP (Excess)
Glotronic Ltd.
Alle Elektronik GmbH
Supply Digital
Perfect Parts
Metaverse IC Inc.
Assy Fe
Cyclops Electronics Ltd (Excess)
Futuretech Components
Kepictronics
This material provides durability and protection for the internal components, ensuring a longer lifespan for the product.
Fast propagation delay allows for quick response times, making this digital counter suitable for applications that require rapid counting.
Operates on a common 5V supply, making it compatible with a wide range of electronic systems and devices.
8-bit resolution provides accurate counting and processing capabilities for various applications.
Withstands high temperatures, making it suitable for use in harsh environments or industrial settings.
Positive edge triggering ensures reliable and precise counting operation, preventing errors or miscounts.
CMOS technology offers low power consumption and high noise immunity, making the digital counter energy-efficient and reliable.
Digital Counters CD40102BE attributes and parameters. Explore more Digital Counters devices from Texas Instruments
Additional Features:
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Load or Preset Input:
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Operation Mode:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
CD40102BE Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-134-5387, 5962011345387, 5962-01-156-8657, 5962011568657, 5962-99-790-5494, 5962997905494
NIIN
011345387, 011568657, 997905494
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
CD40110BE
Harris Semiconductor
DISPLAY DRIVER COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4541BMTE4
Rochester Electronics
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
HEF4060BPN
NXP Semiconductors
HEF4060BPN by NXP Semiconductors is a 14-bit digital counter with a max frequency of 4MHz. Operating at 5V, it has a propagation delay of 420ns and can handle load capacitance of 50pF. Ideal for industrial applications requiring asynchronous operation and negative edge triggering in CMOS technology.
74HC590D,112
NXP Semiconductors' 74HC590D,112 is an 8-bit digital counter with a supply voltage of 5V. It features a propagation delay of 230ns and operates in the temperature range of -40 to 125°C. Ideal for automotive applications, it has a max frequency of 22MHz and utilizes CMOS technology.
CD4020BE
Thomson Consumer Electronics
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC4040M96
CD74HC4040M96 by Texas Instruments is a 12-bit digital counter with a propagation delay of 30 ns. It operates at a supply voltage range of 2-6V and has a max frequency of 20 MHz. Ideal for military-grade applications, it features negative edge triggering and asynchronous operation mode.
SN74F163ADBRE4
SN74F163ADBRE4 by Texas Instruments is a 4-bit digital counter with load/preset input, operating at 5V. Featuring a propagation delay of 11ns and max frequency of 90MHz, it is ideal for synchronous counting applications. This TTL technology device has a trigger type of positive edge and operates in commercial temperature grade range from 0 to 70°C.
CD74HC4060M
General Electric Solid State
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MC14017BCPS
MC14017BCPS by Motorola is a CMOS digital counter with 16 terminals, operating at temperatures from -40 to 85°C. It has a max frequency of 2MHz and operates on power supplies of 5/15V. Ideal for industrial applications requiring synchronous counting in an inline package style.
CD4541BM
Intersil
HEF4020BT
74HC390D,653
NXP Semiconductors' 74HC390D,653 is a digital counter with 4 functions and 3 bits. It operates at a supply voltage of 2-6V, has a propagation delay of 63ns, and can handle up to 20MHz frequency. Ideal for automotive applications due to its temperature grade and asynchronous operation mode.
CD4060BEX
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T16;
SN74LS90NE4
DECADE COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC4017EX
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4541BMTG4
CD4541BMTG4 by Texas Instruments is a 16-bit digital counter with 10000 ns propagation delay, operating at 5V. It features positive edge trigger, synchronous operation mode, and up count direction. Ideal for military-grade applications requiring precise timing functions in compact spaces.
CD74HC93E
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
CD4017BF3A
CD74HC4017E
HEF4017BP
HEF4017BP by NXP Semiconductors is a 10-bit digital counter with a 5V nominal voltage, 280ns propagation delay, and max frequency of 6MHz. Ideal for industrial applications requiring synchronous operation and positive edge trigger type in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4020BE by Texas Instruments is a 14-bit digital counter with a propagation delay of 160 ns and max frequency of 3.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring asynchronous operation and negative edge triggering in CMOS technology.
Rca Solid State
CD4022BNSR
CD4022BNSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and max frequency of 5.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring synchronous operation and positive edge triggering in a compact small outline package.
CD4024BM
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Family: 4000/14000/40000;
CD4024BM by Texas Instruments is a 7-bit digital counter with 160ns propagation delay. It operates at 5V, has a load capacitance of 50pF, and supports up to 3V min supply voltage. Ideal for military-grade applications due to its -55°C to 125°C operating temperature range and asynchronous operation mode.
CD4024BM96
CD4024BM96 by Texas Instruments is a 7-bit digital counter with 160ns propagation delay at 5V. It operates in asynchronous mode, has a max frequency of 3.5MHz, and is ideal for military-grade applications due to its temperature range of -55°C to 125°C.
CD4029BM
CD4029BM by Texas Instruments is a 4-bit digital counter with a propagation delay of 260 ns. It operates at a nominal voltage of 5V and has a max frequency of 2MHz. This CMOS technology device is ideal for military-grade applications requiring bidirectional counting in small outline packages.
CD4022BE
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Load or Preset Input: YES;
DIVIDE BY 8 COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4022BE by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and operates at a nominal voltage of 5V. It features positive edge trigger type, synchronous operation mode, and can handle a max frequency of 2.5 MHz. Ideal for military-grade applications requiring precise counting and timing functions in electronic circuits.
CD4017BE
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved