Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CD4040BNSR by Texas Instruments is a 12-bit digital counter with a propagation delay of 160 ns and a max frequency of 3.5 MHz. It is commonly used in military applications due to its temperature grade and small outline package style.
Median Price
$0.630
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.352
1k+ parts
$0.306
10k+ parts
$0.282
DigiKey
$0.640
$0.355
$0.309
-
Adafruit Industries
$16.944
$15.419
$13.894
Rochester
$0.283
$0.235
$0.210
Verical
$0.262
Digiode
$0.165
Nova Conductors
$0.169
Vyrian
Ampacity Inc.
$0.148
Corphita
$0.157
Continental Prestige Electronics
$0.166
Argo Parts USA
$0.164
Component Stockers USA
$0.180
$0.170
$0.140
Andel Nordic
$5.105
$4.901
Corohmni
$8.301
Advanced Electronics
Parana Technologies
$26.161
$26.743
DigiPath Technology Company
$28.806
ChromeModa Solutions
$29.394
$24.103
IDEA Electronic Components Group
$27.924
$26.455
A-Z Elektronik GmbH
Perfect Parts
Alle Elektronik GmbH
Microchip USA
Kepictronics
Authorized Procurement Solutions
This material provides durability and protection for the internal components of the digital counter, ensuring a longer lifespan.
With a fast propagation delay, this digital counter can quickly process input signals and provide accurate output readings in real-time.
With a higher number of bits, this digital counter can handle larger count values and provide more precise measurements.
Operating at a common supply voltage of 5V makes it compatible with a wide range of electronic systems and components.
The negative edge triggering allows for precise control and synchronization of the counting process, ensuring accurate results.
Being able to operate at high temperatures makes this digital counter suitable for industrial and military applications where heat may be a factor.
CMOS technology offers low power consumption and high noise immunity, making this digital counter efficient and reliable in various environments.
Digital Counters CD4040BNSR attributes and parameters. Explore more Digital Counters devices from Texas Instruments
Additional Features:
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Operation Mode:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
Minimum fmax:
CD4040BNSR Logic ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Carrier Tape Update 23/Feb/2015 PCN Cancelled 17/Apr/2015
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Formosa Microsemi
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Kec
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Microsemi
Grande Electronics
74HCT393PW,118
Nexperia
BINARY COUNTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN74HC393D
Texas Instruments
SN74HC393D by Texas Instruments is a digital counter with 4 bits and 2 functions. It operates at a max frequency of 28 MHz, with a propagation delay of 62 ns. Suitable for industrial applications, it has a temperature range from -40 to 85°C and requires a nominal voltage of 5V.
74HCT393PW-Q100J
NXP Semiconductors
NXP Semiconductors' 74HCT393PW-Q100J is a digital counter with 4 bits, operating at 5V. It features a propagation delay of 38ns, suitable for automotive applications due to AEC-Q100 screening. The package style is small outline, thin profile, shrink pitch, making it ideal for space-constrained designs.
CD4029BM
CD4029BM by Texas Instruments is a 4-bit digital counter with a propagation delay of 260 ns. It operates at a nominal voltage of 5V and has a max frequency of 2MHz. This CMOS technology device is ideal for military-grade applications requiring bidirectional counting in small outline packages.
CD4060BPWRE4
CD4060BPWRE4 by Texas Instruments is a 14-bit digital counter with a propagation delay of 300 ns at 5V. It operates in asynchronous mode, suitable for military-grade applications with a temperature range of -55 to 125°C. The CMOS technology chip has a max frequency of 3.5 MHz and low power supply current of 0.03 mA, making it ideal for compact designs requiring precise counting capabilities.
MC74AC161DG
MC74AC161DG by Onsemi is a 4-bit digital counter with 13.5 ns propagation delay and max frequency of 60 MHz. It operates at supply voltages of 3.3/5V, ideal for industrial applications requiring synchronous counting in a compact small outline package.
74VHC161MX
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD4026BE
Rca Solid State
DISPLAY DRIVER COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC40103M
General Electric Solid State
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
74HC590D,112
BINARY COUNTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC4060M
Thomson Consumer Electronics
SN74HC393DR
SN74HC393DR by Texas Instruments is a digital counter with 4 bits and 2 functions. It has a propagation delay of 62 ns at a nominal voltage of 5V, making it suitable for industrial applications requiring asynchronous operation and negative edge triggering. This small outline package features surface mount technology and can handle a max frequency of 25 MHz.
74HC161D,653
74HC161D,653 by NXP Semiconductors is a 4-bit digital counter with synchronous operation. It has a propagation delay of 57 ns and operates at a max frequency of 15 MHz. Ideal for automotive applications, this CMOS technology-based device features positive edge triggering and can function within a temperature range of -40 to 125°C.
HCF4060M013TR
STMicroelectronics
HCF4060M013TR by STMicroelectronics is a 14-bit digital counter with a propagation delay of 740 ns. Operating at a max frequency of 3.5 MHz, it is ideal for military-grade applications requiring asynchronous operation and negative edge triggering. This small outline package features surface mount technology and operates within a wide temperature range from -55°C to 125°C.
M74HC4060RM13TR
STMicroelectronics M74HC4060RM13TR is a 14-bit digital counter with 450 ns propagation delay and 4A max I (ol). It operates in the temperature range of -55 to 125°C, suitable for military-grade applications. With a max frequency of 20MHz, it is ideal for asynchronous counting tasks in various electronic systems.
SN74HC4020PWT
SN74HC4020PWT by Texas Instruments is a 14-bit digital counter with a propagation delay of 32 ns and operates at a supply voltage of 5V. It features negative edge triggering, industrial temperature grade, and can handle a max frequency of 22 MHz. Ideal for applications requiring precise counting in industrial settings.
CD4017BM
CD4017BM by Texas Instruments is a 10-bit digital counter with 270 ns propagation delay and 5V nominal voltage. Ideal for military applications, it features positive edge trigger, up count direction, and operates at a max frequency of 2.5 MHz.
CD4040BEX
Intersil
CD4040BEX by Intersil is a CMOS digital counter with 16 terminals, operating at temperatures from -40 to 85°C. It has a max frequency of 3.5 MHz and operates on power supplies of 5/15V. Ideal for industrial applications requiring asynchronous count direction and load capacitance of 50pF.
74HC4024D
BINARY COUNTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC93M
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CD4020BE
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4020BE by Texas Instruments is a 14-bit digital counter with a propagation delay of 160 ns and max frequency of 3.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring asynchronous operation and negative edge triggering in CMOS technology.
CD4022BNSR
CD4022BNSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and max frequency of 5.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring synchronous operation and positive edge triggering in a compact small outline package.
CD4024BM
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Family: 4000/14000/40000;
CD4024BM by Texas Instruments is a 7-bit digital counter with 160ns propagation delay. It operates at 5V, has a load capacitance of 50pF, and supports up to 3V min supply voltage. Ideal for military-grade applications due to its -55°C to 125°C operating temperature range and asynchronous operation mode.
CD4024BM96
CD4024BM96 by Texas Instruments is a 7-bit digital counter with 160ns propagation delay at 5V. It operates in asynchronous mode, has a max frequency of 3.5MHz, and is ideal for military-grade applications due to its temperature range of -55°C to 125°C.
CD4022BE
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
RING COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Load or Preset Input: YES;
DIVIDE BY 8 COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4022BE by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and operates at a nominal voltage of 5V. It features positive edge trigger type, synchronous operation mode, and can handle a max frequency of 2.5 MHz. Ideal for military-grade applications requiring precise counting and timing functions in electronic circuits.
CD4017BE
DECADE COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved