Loading...

Optocoupler Photocell Outputs

An optocoupler is an electronic device that uses an optical sensor to transfer electrical signals between two circuits. The two circuits are physically isolated from each other and are connected only by a beam of light that is emitted by an LED and detected by a photodetector.

The optocoupler photocell output is the electrical signal that is generated by the photodetector in response to the light emitted by the LED. The photocell output is used to control or communicate with the circuit that is connected to the optocoupler.

Optocouplers are commonly used in applications where electrical isolation is required, such as in power supplies, motor control, and medical equipment. The isolation provided by the optocoupler helps to protect sensitive electronic components and circuits from electrical interference and noise.

One of the advantages of using an optocoupler photocell output is that it provides a high level of electrical isolation between two circuits. The isolation helps to prevent electrical noise and interference from affecting the circuit and can improve the overall performance and reliability of the system.

Another advantage of using an optocoupler photocell output is that it is sensitive to light and can be used to detect changes in light intensity. This feature makes optocoupler photocell outputs useful in applications such as light sensors, light meters, and optical communication systems.

One of the disadvantages of using an optocoupler photocell output is that it can introduce a small amount of delay or lag into the system. This delay can be particularly important in high-speed applications where timing is critical.

Optocoupler Photocell Outputs

Available Parts 17

Part RoHS Manufacturer Description Optoelectronic Type Mounting Feature Terminal Finish Configuration Control Current No. of Elements Packing Method No. of Input Channels Maximum Rise Time Maximum Operating Temperature No. of Output Channels Minimum Operating Temperature Minimum Collector-emitter Breakdown Voltage Maximum Isolation Voltage Control Voltage Maximum Power Dissipation Input Type Additional Features JESD-609 Code
NSL-32SR3 by Luna Innovations

NSL-32SR3

Luna Innovations

Optocoupler - Photocell Outputs;

VTL5C3/2 by Excelitas Technologies

VTL5C3/2

Excelitas Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Rise Time: .003 ms; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Control Voltage: 1.65 V;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

THROUGH HOLE MOUNT

SINGLE

.04 A

1

1

.003 ms

75 Cel

1

-40 Cel

100 V

2500 V

1.65 V

.175 W

LED LAMP

ACPL-K30T-000E by Broadcom

ACPL-K30T-000E

Broadcom

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Input Type: LED LAMP; Configuration: SINGLE; JESD-609 Code: e3;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

TIN

SINGLE

20 A

1

TUBE

1

125 Cel

1

-40 Cel

6 V

5000 V

1.85 V

LED LAMP

UL RECOGNIZED, LOGIC COMPATIBLE

e3

ACPL-K30T-560E by Broadcom

ACPL-K30T-560E

Broadcom

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Configuration: SINGLE; No. of Output Channels: 1; Control Voltage: 1.85 V;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

TIN

SINGLE

20 A

1

TR

1

125 Cel

1

-40 Cel

6 V

5000 V

1.85 V

LED LAMP

AEC-Q100

e3

ACPL-K30T-500E by Broadcom

ACPL-K30T-500E

Broadcom

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; No. of Elements: 1; No. of Output Channels: 1; JESD-609 Code: e3;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

TIN

SINGLE

20 A

1

TR

1

125 Cel

1

-40 Cel

6 V

5000 V

1.85 V

LED LAMP

UL RECOGNIZED, LOGIC COMPATIBLE

e3

LT2001 by Infineon Technologies

LT2001

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Input Type: LED LAMP; Maximum Power Dissipation: .1 W;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

2500 V

.1 W

LED LAMP

e0

100960067 by Infineon Technologies

100960067

Infineon Technologies

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Input Type: LED LAMP; Maximum Isolation Voltage: 500 V; No. of Input Channels: 1; Maximum Power Dissipation: 50 W;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

1

350 ms

100 Cel

2

15 V

500 V

50 W

LED LAMP

LT3011 by Infineon Technologies

LT3011

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .075 W; JESD-609 Code: e0; Input Type: LED LAMP;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

3000 V

.075 W

LED LAMP

e0

100960066 by Infineon Technologies

100960066

Infineon Technologies

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Input Type: LED LAMP; Minimum Collector-emitter Breakdown Voltage: 15 V; Maximum Rise Time: 350 ms; No. of Output Channels: 2;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

1

350 ms

100 Cel

2

15 V

500 V

50 W

LED LAMP

100960065 by Infineon Technologies

100960065

Infineon Technologies

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 500 V; Maximum Power Dissipation: 50 W; No. of Input Channels: 1; No. of Output Channels: 2;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

1

350 ms

100 Cel

2

15 V

500 V

50 W

LED LAMP

LT1003 by Infineon Technologies

LT1003

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Input Type: LED LAMP; No. of Output Channels: 1; Maximum Power Dissipation: .15 W;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

3000 V

.15 W

LED LAMP

e0

LT2011 by Infineon Technologies

LT2011

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Maximum Power Dissipation: .1 W; Input Type: LED LAMP;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

2500 V

.1 W

LED LAMP

e0

LT1002 by Infineon Technologies

LT1002

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Output Channels: 1; JESD-609 Code: e0; Maximum Isolation Voltage: 3000 V;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

3000 V

.15 W

LED LAMP

e0

LT1001 by Infineon Technologies

LT1001

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 3000 V; No. of Output Channels: 1; Configuration: SINGLE;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

3000 V

.15 W

LED LAMP

e0

LT2002 by Infineon Technologies

LT2002

Infineon Technologies

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Configuration: SINGLE; Input Type: LED LAMP;

LIGHT DEPENDENT RESISTOR OUTPUT OPTOCOUPLER

RADIAL MOUNT

Tin/Lead (Sn/Pb)

SINGLE

1

1

2500 V

.1 W

LED LAMP

e0

100960064 by Infineon Technologies

100960064

Infineon Technologies

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 500 V; No. of Output Channels: 2; Input Type: LED LAMP;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

1

350 ms

100 Cel

2

15 V

500 V

50 W

LED LAMP

ACPL-K30T-060E by Broadcom

ACPL-K30T-060E

Broadcom

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Collector-emitter Breakdown Voltage: 6 V; Control Voltage: 1.85 V; Maximum Operating Temperature: 125 Cel;

PHOTO VOLTAIC CELL OUTPUT OPTOCOUPLER

SURFACE MOUNT

TIN

SINGLE

20 A

1

TUBE

1

125 Cel

1

-40 Cel

6 V

5000 V

1.85 V

LED LAMP

AEC-Q100

e3