Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's SF2186E is a SAW filter with 6 terminals, offering 67 dB attenuation at max frequency of 41000 kHz. With a center frequency of 1268.52 MHz and insertion loss of 3.2 dB, it is ideal for applications requiring surface mount filters in the range of -40 to 85°C.
Median Price
$0.910
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
DigiKey Marketplace
Nova Conductors
Cyclops Electronics Ltd
Vyrian
AZTECH Wire
$8.326
Metaverse IC Inc.
Argo Parts USA
Benley Electronics
Bastille Electronics
Continental Prestige Electronics
GreenTree Electronics
Having 6 terminals allows for more connections and flexibility in setting up the filter in various configurations.
SAW filters are known for their high performance and low insertion loss, making this product a reliable choice for filtering applications.
High attenuation at maximum frequency ensures effective suppression of unwanted signals or noise, enhancing the signal quality.
With a high maximum operating temperature, this filter can withstand demanding environmental conditions without compromising performance.
Effective attenuation at a relatively low frequency helps in filtering out interference and improving signal clarity.
Compact width makes it suitable for applications where space is limited or when multiple filters need to be integrated in a small area.
The specified center frequency indicates the filter's intended frequency range, making it suitable for specific signal processing requirements.
SAW Filters SF2186E attributes and parameters. Explore more SAW Filters devices from Murata Manufacturing
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Nte Electronics
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
TA1227BBB
Tai-saw Technology
SAW FILTER; Length: 3 mm; Dimensions: L3.0XB3.0XH1.4 (mm)/L0.118XB0.118XH0.055 (inch); Width (mm): 3.0; Height: 1.4 mm; Impedance (Input): 50 OHM;
SF0070CF51543T
Renesas Electronics
SAW FILTER; Mounting Type: THROUGH HOLE MOUNT; No. of Functions: 1; Length: 27.18 mm; Maximum Insertion Loss: 23 dB; JESD-609 Code: e0;
SF1220BA02539S
SAW FILTER; Width (mm): 3.0; Impedance (Input): 200 OHM; Additional Features: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn);
B39162B4060U810
TDK
TDK's B39162B4060U810 SAW Filter has 8 terminals, operates b/w -40°C to 105°C. With a width of 3.0mm and length of 3mm, it offers a max insertion loss of 2dB at 1575.42MHz. Ideal for applications requiring a surface mount filter with an impedance of 50Ω.
SAFFB876MAA0F0AR1X
Murata Manufacturing
SAW FILTER; Length: 1.1 mm; Additional Features: TR, EMBOSSED, 7 INCH; Width (mm): 0.9; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); Height: .5 mm;
SF2124E
Rfm Integrated Device
SAW FILTER; Output Impedance (ohm): 50 OHM; Package Material: CERAMIC; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 125 Cel; Screening Level: AEC-Q200;
SF0044BA01979T
SAW-VIDEO/SOUND FILTER; No. of Functions: 1; Height: 5.1 mm; Manufacturer Series: SF0044BA01979T; Center/Cutoff Frequency (fo/fc): 44 MHz; Impedance (Input): 50 OHM;
SF0063BA03106S
SAW FILTER; No. of Terminals: 10; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM;
SF0140BA02434S
SAW FILTER; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e3; Impedance (Input): 50 OHM; No. of Terminals: 10; Maximum Insertion Loss: 22 dB;
SBU4027D
Toshiba
SAW FILTER; Dimensions: D9.1XH3.8 (mm)/D0.358XH0.15 (inch); Diameter (mm): 9.1; No. of Functions: 1; Height: 3.8 mm; Minimum Operating Temperature: -20 Cel;
ACPF-7003-TR1G
Broadcom
SAW FILTER; Mounting Type: SURFACE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Package Material: PLASTIC;
ABSTS5A2-2HMM01MM
Abracon
ABSTS5A2-2HMM01MM by Abracon is a SAW filter with 5 terminals, 1582.47 MHz center frequency, and 2.5 dB max insertion loss. Ideal for applications requiring a compact surface-mount solution with an operating temperature range of -30 to 85°C.
RSF-915.000-26000-3030-TR-NS3
Raltron Electronics
Raltron Electronics RSF-915.000-26000-3030-TR-NS3 is a SAW FILTER with 6 terminals, operating from -40 to 85°C. Featuring 2.6 dB insertion loss at 915 MHz, it has a compact size of 3x3x1.3mm for surface mount applications in RF circuits.
AFS14A30-2185.00-T3
Abracon's AFS14A30-2185.00-T3 SAW Filter has 5 terminals, operates b/w -30°C to 105°C, with a width of 1.1mm. It offers a max insertion loss of 3.5 dB at 2185 MHz and is ideal for applications requiring a surface mount filter with an impedance of 50 ohms.
NWR150
Infineon Technologies
SAW FILTER; Package Material: PLASTIC; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel;
SBU4832T
SAW FILTER; No. of Functions: 1; Output Impedance (ohm): 50 OHM; Diameter (mm): 9.5; Minimum Operating Temperature: -20 Cel; Height: 3.8 mm;
SF0140BA02486S
SAW FILTER; Output Impedance (ohm): 50 OHM; Dimensions: L24.64XB9.0XH1.64 (mm)/L0.97XB0.354XH0.065 (inch); Width (mm): 9.0; Maximum Insertion Loss: 25 dB; Mounting Type: SURFACE MOUNT;
F047MSL
SAW-VIDEO/SOUND FILTER; Minimum Operating Temperature: -20 Cel; Dimensions: L16.3XB6.3XH4.0 (mm)/L0.642XB0.248XH0.157 (inch); Impedance (Input): 16.4 pF OHM; No. of Functions: 1; Length: 16.3 mm;
SF0600BA03183S
SAW FILTER; Length: 5 mm; Impedance (Input): 50 OHM; Height: 2.12 mm; Minimum Operating Temperature: 25 Cel; Output Impedance (ohm): 50 OHM;
SF0881BA02514S
SAW FILTER; Length: 3 mm; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Width (mm): 3.0; Package Material: PLASTIC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SAW FILTER; Height: 1.38 mm; Width (mm): 3.13; Screening Level: AEC-Q200; No. of Functions: 1; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch);
SF2160E
SAW FILTER; Maximum Insertion Loss: 3.2 dB; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Additional Features: TAPE AND REEL; Height: 1.38 mm;
SF2133BA02661S
SAW FILTER; Height: 1 mm; Width (mm): 3.0; Length: 3 mm; Maximum Insertion Loss: 3.7 dB; No. of Terminals: 6;
SF2140BA02540S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 2140 MHz; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -20 Cel; Height: 1 mm; Terminal Finish: Matte Tin (Sn);
SF2140BA02595S
SAW FILTER; Terminal Finish: Matte Tin (Sn); Dimensions: L2.5XB2.0XH1.0 (mm)/L0.098XB0.079XH0.039 (inch); Center/Cutoff Frequency (fo/fc): 2140 MHz; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT;
SF2177E-1
SAW FILTER; Maximum Insertion Loss: 4.5 dB; JESD-609 Code: e4; Terminal Finish: GOLD OVER NICKEL; Length: 3.13 mm; Minimum Operating Temperature: -20 Cel;
SF2196E
Rf Monolithics
SAW FILTER; Maximum Insertion Loss: 2.5 dB; Impedance (Input): 50 OHM; Length: 3.13 mm; No. of Functions: 1; Mounting Type: SURFACE MOUNT;
SF2158E
SAW FILTER; Height: 1.38 mm; Additional Features: TAPE AND REEL; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); No. of Terminals: 6; Center/Cutoff Frequency (fo/fc): 2535 MHz;
SF2171E
SAW FILTER; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Length: 3.13 mm; No. of Functions: 1; No. of Terminals: 6;
SF2184E
SAW FILTER; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 80 Cel; Maximum Insertion Loss: 3.5 dB; Additional Features: TAPE AND REEL;
SF2191E
SAW FILTER; Width (mm): 3.13; Output Impedance (ohm): 50 OHM; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; No. of Terminals: 6; Mounting Type: SURFACE MOUNT;
SF2198E
SAW FILTER; Center/Cutoff Frequency (fo/fc): 806 MHz; Minimum Operating Temperature: -25 Cel; No. of Terminals: 6; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); Impedance (Input): 50 OHM;
SF2199E
SAW FILTER; Center/Cutoff Frequency (fo/fc): 787 MHz; Additional Features: TAPE AND REEL; Length: 3.13 mm; Minimum Operating Temperature: -40 Cel; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch);
SF2133E
SAW FILTER; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel; Width (mm): 3.13; Height: 1.38 mm; Mounting Type: SURFACE MOUNT;
SF2134E
SAW FILTER; Length: 3.13 mm; Width (mm): 3.13; Center/Cutoff Frequency (fo/fc): 897.5 MHz; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel;
SF2136E
SAW FILTER; Mounting Type: SURFACE MOUNT; No. of Terminals: 6; No. of Functions: 1; Length: 3.13 mm; Maximum Operating Temperature: 85 Cel;
SF2137E
SAW FILTER; Length: 3.13 mm; Center/Cutoff Frequency (fo/fc): 869 MHz; Minimum Operating Temperature: -40 Cel; Additional Features: TAPE AND REEL; Height: 1.38 mm;
SF2195E
SAW FILTER; Length: 3.13 mm; JESD-609 Code: e4; Output Impedance (ohm): 50 OHM; Additional Features: TAPE AND REEL; Minimum Operating Temperature: -30 Cel;
SAW FILTER; No. of Terminals: 6; Package Material: CERAMIC; Maximum Operating Temperature: 85 Cel; Impedance (Input): 50 OHM; Maximum Insertion Loss: 2.5 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved