Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SAW FILTER; Output Impedance (ohm): 50 OHM; Package Material: CERAMIC; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 125 Cel; Screening Level: AEC-Q200;
Median Price
$1.594
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.880
100+ parts
$1.420
1k+ parts
$1.080
10k+ parts
$0.948
DigiKey
-
$1.309
$1.136
DigiKey Marketplace
$0.910
Vyrian
Bristol Electronics
Martec Srl
Chip Stock
Nova Conductors
Aztec Data Supply Inc.
$2.841
AZTECH Wire
$13.530
Kepictronics
Bastille Electronics
Continental Prestige Electronics
Perfect Parts
Authorized Procurement Solutions
Argo Parts USA
SAW Filters SF2124E attributes and parameters. Explore more SAW Filters devices from Rfm Integrated Device
Additional Features:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Screening Level:
Width (mm):
wireless is RFMi. Building on four decades of experience in the design and manufacture of low-power radio frequency (RF) products, today RFMi is enabling OEM design engineers to connect and network more devices, equipment, and processes than ever before. RFMi designs, develops, markets a broad range of radio frequency (RF) component and module products for low power and wireless communications. RFMi carry 5 major timing and frequency products lines for the emerging wireless applications. · SAW resonators, filters · Crystal Oscillators, TCXO, VCXO, OCXO · Dielectric filters · Patch antennas and Chip antennas · Certain front-end modules including LNA and SAW filters Founded in 1979 to design and manufacture low-power RF products using surface acoustic wave ( SAW ) technology , RFM products now include RF communications components, subsystem short-range radios , RF modules and boxed radios for a broad range of industrial, commercial and consumer applications. With the acquisition of modules manufacturer Coronet in 2006 , RFM’s product portfolio provides a comprehensive selection of wireless standards and proprietary-based communications and networking products.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
Fairchild Semiconductor
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Pro-an Electronic
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TA2307A
Tai-saw Technology
TA2307A by Tai-saw Technology is a SAW filter with 1 function and 6 terminals. It has a max insertion loss of 5 dB and operates at temperatures ranging from -40 to 105 °C. This surface mount filter is commonly used in applications requiring a center frequency of 3500 MHz and an input impedance of 50 OHM.
SBU4036LD
Toshiba
SAW FILTER; Dimensions: D9.1XH3.8 (mm)/D0.358XH0.15 (inch); Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -20 Cel; Impedance (Input): 50 OHM; Diameter (mm): 9.1;
SF1092A
Murata Manufacturing
Murata Manufacturing's SF1092A is a SAW filter with 10 terminals, operating at -10 to 85°C. It has a width of 6.8mm and length of 19.3mm, with max insertion loss of 7dB at 199MHz center frequency. Ideal for applications requiring a surface mount filter with 50Ω impedance input/output.
B39242B9413K610
Rf360 Europe
SAW FILTER; Center/Cutoff Frequency (fo/fc): 2441.75 MHz; Dimensions: L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch); Mounting Type: SURFACE MOUNT; Width (mm): 1.1; Output Impedance (ohm): 50 OHM//2.5 nH;
B39871B3715U410
TDK
The TDK B39871B3715U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a width of 3.0mm. It offers a max insertion loss of 3.3 dB at 869 MHz and an impedance of 50 ohms. Ideal for applications requiring surface mount filters in the frequency range of 869 MHz.
SF0088BA02429S
SAW FILTER; Impedance (Input): 50 OHM; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Dimensions: L15.9XB6.5XH2.0 (mm)/L0.626XB0.256XH0.079 (inch); No. of Terminals: 10;
B674
Infineon Technologies
SAW FILTER; Center/Cutoff Frequency (fo/fc): 480 MHz;
SF2250E
Murata Manufacturing's SF2250E is a SAW filter with 6 terminals, operating b/w -20°C to 70°C. It offers a center frequency of 1615 MHz and max insertion loss of 4.6 dB. Ideal for applications requiring a compact surface mount design and impedance matching of 50 ohms.
AFS1575.42S4-T
Abracon
Abracon's AFS1575.42S4-T is a SAW filter with 6 terminals, operating from -30°C to 85°C. It offers a center frequency of 1575.42 MHz, max insertion loss of 2 dB, and impedance of 50 ohms. Ideal for surface mount applications in various electronic devices requiring precise signal filtering at 1.5mm height and compact 3mm length.
B39921B3728U410
The TDK B39921B3728U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a width of 3.0mm. It offers a max insertion loss of 4 dB at 915 MHz and is ideal for applications requiring a surface mount filter with an impedance of 50 OHM.
SF0881BA02514S
SAW FILTER; Length: 3 mm; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Width (mm): 3.0; Package Material: PLASTIC;
SF0070CF51557T
SAW FILTER; Terminal Finish: Matte Tin (Sn); Mounting Type: THROUGH HOLE MOUNT; Maximum Insertion Loss: 24 dB; JESD-609 Code: e3; Dimensions: L22.1XB12.7XH5.33 (mm)/L0.87XB0.5XH0.21 (inch);
B39921B4301F210
The TDK B39921B4301F210 is a SAW filter with 5 terminals, operating from -40 to 85°C. It has a center frequency of 915 MHz and max insertion loss of 2.5 dB. Ideal for applications requiring a compact surface mount filter with impedance of 50 ohms in automotive electronics.
SAFFB1G56KB0F0AR1X
SAW FILTER; Additional Features: TR, EMBOSSED, 7 INCH; Width (mm): 0.9; Height: .5 mm; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); No. of Functions: 1;
B39321B3761Z810
SAW FILTER; Minimum Operating Temperature: -45 Cel; Maximum Insertion Loss: 2.6 dB; Width (mm): 3.8; Additional Features: INSERTION LOSS INCLUDING LOSS IN MATCHING ELEMENTS; Maximum Operating Temperature: 95 Cel;
SF1500BA03201S
SAW FILTER; Impedance (Input): 50 OHM; Terminal Finish: Matte Tin (Sn); No. of Terminals: 6; Height: 1.25 mm; Minimum Operating Temperature: -30 Cel;
B682
SAW FILTER; Center/Cutoff Frequency (fo/fc): 403.18 MHz;
B696
TB1347A
TB1347A by Tai-saw Technology is a SAW FILTER with 2 functions, 10 terminals, and 70 MHz center frequency. It operates b/w -40 to 80 °C and has a max insertion loss of 8.5 dB. Ideal for applications requiring surface mount filters with impedance of 50 OHM.
B39162B8313P810
SAW FILTER; Minimum Operating Temperature: -30 Cel; Output Impedance (ohm): 50 OHM; Terminal Finish: Gold (Au); Length: 1.4 mm; JESD-609 Code: e4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF2124E
SAW FILTER; Height: 1.38 mm; Width (mm): 3.13; Screening Level: AEC-Q200; No. of Functions: 1; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch);
SF2186E
SAW FILTER; Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 1268.52 MHz; No. of Functions: 1; Additional Features: TAPE AND REEL; Impedance (Input): 50 OHM;
SF2160E
SAW FILTER; Maximum Insertion Loss: 3.2 dB; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Additional Features: TAPE AND REEL; Height: 1.38 mm;
SF2133BA02661S
SAW FILTER; Height: 1 mm; Width (mm): 3.0; Length: 3 mm; Maximum Insertion Loss: 3.7 dB; No. of Terminals: 6;
SF2140BA02540S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 2140 MHz; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -20 Cel; Height: 1 mm; Terminal Finish: Matte Tin (Sn);
SF2140BA02595S
SAW FILTER; Terminal Finish: Matte Tin (Sn); Dimensions: L2.5XB2.0XH1.0 (mm)/L0.098XB0.079XH0.039 (inch); Center/Cutoff Frequency (fo/fc): 2140 MHz; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT;
SF2176E
SAW FILTER; Maximum Insertion Loss: 2.9 dB; Length: 3.13 mm; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel; Height: 1.38 mm;
SF2133E-3
SAW FILTER; Output Impedance (ohm): 50 OHM; Length: 3.13 mm; Impedance (Input): 50 OHM; Maximum Operating Temperature: 90 Cel; Center/Cutoff Frequency (fo/fc): 1747.5 MHz;
SF2126E
Rfm Integrated Device
SAW FILTER; No. of Terminals: 8; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 95 Cel; Impedance (Input): 50 OHM; Length: 3.13 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved