Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's SF2250E is a SAW filter with 6 terminals, operating b/w -20°C to 70°C. It offers a center frequency of 1615 MHz and max insertion loss of 4.6 dB. Ideal for applications requiring a compact surface mount design and impedance matching of 50 ohms.
Median Price
$1.234
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.750
100+ parts
$1.240
1k+ parts
$0.956
10k+ parts
$0.699
DigiKey
-
$0.717
Nova Conductors
$0.768
DigiKey Marketplace
$0.790
$0.720
Vyrian
Argo Parts USA
Continental Prestige Electronics
$0.753
GreenTree Electronics
Having 6 terminals allows for a more complex and precise functionality.
SAW (Surface Acoustic Wave) filters are known for their high performance and low loss characteristics.
The high maximum operating temperature ensures reliability even in challenging environmental conditions.
The low minimum operating temperature allows for usage in a wide range of cold environments.
The compact width makes it suitable for applications where space is limited.
The low insertion loss ensures minimal signal degradation.
The specific frequency range makes it ideal for filtering signals at 1615 MHz.
Matches the standard 50 ohm impedance for seamless integration in various systems.
The compact length further adds to the space-saving design of the product.
Consistent input and output impedance of 50 ohms ensure proper signal transmission.
Surface mount installation allows for easy and reliable integration on circuit boards.
The precise dimensions make it easy to fit and connect within a system.
The low height profile contributes to the overall compactness of the product.
SAW Filters SF2250E attributes and parameters. Explore more SAW Filters devices from Murata Manufacturing
Additional Features:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Width (mm):
PCN Obsolescence/ EOL - Mult Devs EOL 15/NOV/2019
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Micropac Industries
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Fairchild Semiconductor
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Semiconductors
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
EU2B-YS3103F
Idec
ROTARY SWITCH;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
B39431B3748H110
Rf360 Europe
SAW FILTER; No. of Terminals: 6; Center/Cutoff Frequency (fo/fc): 434.42 MHz; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 2.6 dB; Minimum Operating Temperature: -45 Cel;
SF0140BA03115S
Renesas Electronics
SAW FILTER; Impedance (Input): 50 OHM; JESD-609 Code: e3; No. of Functions: 1; Center/Cutoff Frequency (fo/fc): 140 MHz; Mounting Type: SURFACE MOUNT;
SF0140BA03008T
SAW FILTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Output Impedance (ohm): 50 OHM; Center/Cutoff Frequency (fo/fc): 140 MHz; Height: 5.33 mm;
AFS20A26-915.00-T3
Abracon
Abracon's AFS20A26-915.00-T3 SAW Filter operates b/w -30°C to 85°C, with a center frequency of 915 MHz and 3 dB max insertion loss. With 4 terminals and dimensions of L2.0xB1.6xH0.9 (mm), it is ideal for applications requiring a compact surface mount filter with 50 ohm impedance such as RF communication systems.
RF3603D
Murata Manufacturing
Murata Manufacturing's RF3603D SAW Filter has 8 terminals, operates b/w -40°C to 85°C. With a width of 4.0mm and length of 4mm, it offers a max insertion loss of 2.2 dB at 316.4 MHz center frequency. Ideal for applications requiring a surface mount filter with impedance of 50 ohm input and 150 ohm output.
B4693
SAW FILTER; JESD-609 Code: e0; Package Material: CERAMIC; No. of Terminals: 8; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 70 Cel;
SF0600BA03183S
SAW FILTER; Length: 5 mm; Impedance (Input): 50 OHM; Height: 2.12 mm; Minimum Operating Temperature: 25 Cel; Output Impedance (ohm): 50 OHM;
B39721B5326U410
TDK
The TDK B39721B5326U410 SAW Filter has 2 functions, 6 terminals, and operates b/w -40°C to 85°C. With a width of 3mm and height of 1.1mm, it offers a max insertion loss of 4.2 dB at a center frequency of 725.5 MHz. Ideal for applications requiring surface mount filters with an impedance of 50Ω.
SF0300BA02467S
SAW FILTER; Width (mm): 5.0; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
F047RSL
Toshiba
SAW-VIDEO/SOUND FILTER; Maximum Operating Temperature: 70 Cel; Output Impedance (ohm): 10.3 pF OHM; Length: 16.3 mm; No. of Functions: 1; Minimum Operating Temperature: -20 Cel;
SF0903BA02593S
SAW FILTER; JESD-609 Code: e3; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); Terminal Finish: Matte Tin (Sn); Mounting Type: SURFACE MOUNT;
SF0063BA03106S
SAW FILTER; No. of Terminals: 10; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Output Impedance (ohm): 50 OHM;
SBU4832T
SAW FILTER; No. of Functions: 1; Output Impedance (ohm): 50 OHM; Diameter (mm): 9.5; Minimum Operating Temperature: -20 Cel; Height: 3.8 mm;
B39162B9415K610
SAW FILTER; Maximum Insertion Loss: 1 dB; Height: .4 mm; Minimum Operating Temperature: -40 Cel; No. of Terminals: 5; Impedance (Input): 50 OHM;
B39262B5308U410
The TDK B39262B5308U410 SAW Filter has 6 terminals, operates b/w -30°C to 100°C, with a width of 3.0mm. It offers a max insertion loss of 2.8 dB at a center frequency of 2595 MHz and impedance of 50 OHM. Ideal for surface mount applications in various electronic devices requiring precise signal filtering.
SF1575BA02534S
SAW FILTER; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Center/Cutoff Frequency (fo/fc): 1575.42 MHz; JESD-609 Code: e3;
SF0154BA03191S
SAW FILTER; Height: 2 mm; Maximum Insertion Loss: 12 dB; Impedance (Input): 50 OHM; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SF1575DL03104S
SAW FILTER; JESD-609 Code: e3; Minimum Operating Temperature: 20 Cel; Impedance (Input): 50 OHM; Package Material: PLASTIC; No. of Terminals: 8;
SF0869BA02504S
SAW FILTER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 6; Height: 1.5 mm; Minimum Operating Temperature: -30 Cel; Impedance (Input): 50 OHM;
The TDK B39431B3748H110 SAW Filter has a center frequency of 434.42 MHz and max insertion loss of 2.6 dB. With gold terminal finish, it operates b/w -45°C to 95°C, ideal for surface mount applications in various electronic devices requiring impedance of 350 OHM//2.2 pF.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF2250E-1
Murata Manufacturing's SF2250E-1 is a SAW FILTER with 1615 MHz Center Frequency, 4.6 dB Max Insertion Loss, and 50 OHM Impedance. Ideal for surface mount applications in temperature range of -20 to 70 °C, it offers compact dimensions of L3.13xB3.13xH1.38 mm.
SF2206E
Rf Monolithics
SAW FILTER; Center/Cutoff Frequency (fo/fc): 2655 MHz; Height: 1.38 mm; Terminal Finish: GOLD OVER NICKEL; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); Impedance (Input): 50 OHM;
SF2215E
SAW FILTER; Maximum Operating Temperature: 75 Cel; Mounting Type: SURFACE MOUNT; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); Center/Cutoff Frequency (fo/fc): 1960 MHz; Minimum Operating Temperature: -20 Cel;
SF2240E
SAW FILTER; Width (mm): 3.13; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); No. of Terminals: 6; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM;
SF2251E
SAW FILTER; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; Additional Features: TAPE AND REEL; Length: 3.13 mm; Package Material: CERAMIC;
SF2200E
SAW FILTER; Impedance (Input): 50 OHM; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); No. of Functions: 1; Height: 1.38 mm; Minimum Operating Temperature: -40 Cel;
SF2201E
SAW FILTER; Additional Features: TAPE AND REEL; Mounting Type: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Temperature: -30 Cel; Center/Cutoff Frequency (fo/fc): 916.45 MHz;
SF2248E
SAW FILTER; Width (mm): 3.13; Maximum Insertion Loss: 2.5 dB; Mounting Type: SURFACE MOUNT; Height: 1.3 mm; Additional Features: TAPE AND REEL;
SF2252E
SAW FILTER; Center/Cutoff Frequency (fo/fc): 1590 MHz; Mounting Type: SURFACE MOUNT; Length: 3.13 mm; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM;
SF2253E
SAW FILTER; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 2655 MHz; No. of Terminals: 6; Additional Features: TAPE AND REEL; Width (mm): 3.13;
SF2254E
SAW FILTER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 6; Output Impedance (ohm): 50 OHM; Length: 3.13 mm; Minimum Operating Temperature: -30 Cel;
SF2255E
SAW FILTER; Width (mm): 3.13; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); Length: 3.13 mm; Maximum Operating Temperature: 85 Cel; Additional Features: TAPE AND REEL;
SF2258E
SAW FILTER; Output Impedance (ohm): 50 OHM; Additional Features: TAPE AND REEL; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Length: 3.13 mm;
SF2224E
SAW FILTER; Maximum Insertion Loss: 4 dB; Length: 3.13 mm; Package Material: CERAMIC; Center/Cutoff Frequency (fo/fc): 1950 MHz; JESD-609 Code: e4;
SF2225E
SAW FILTER; Minimum Operating Temperature: -30 Cel; Maximum Insertion Loss: 3.5 dB; Height: 1.38 mm; Maximum Operating Temperature: 80 Cel; No. of Terminals: 6;
SF2233E
SAW FILTER; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Additional Features: TAPE AND REEL; Output Impedance (ohm): 50 OHM; Width (mm): 3.13; Minimum Operating Temperature: -40 Cel;
SF2294E
SAW FILTER; No. of Terminals: 6; Minimum Operating Temperature: -20 Cel; No. of Functions: 1; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
SF2202E-1
SAW FILTER; Impedance (Input): 50 OHM; Maximum Operating Temperature: 95 Cel; Length: 3.13 mm; Center/Cutoff Frequency (fo/fc): 2017.5 MHz; Mounting Type: SURFACE MOUNT;
SF2280E
SAW FILTER; Length: 3.13 mm; Width (mm): 3.13; Center/Cutoff Frequency (fo/fc): 869.2125 MHz; Height: 1.38 mm; Maximum Operating Temperature: 55 Cel;
SF2275E-1
SAW FILTER; Additional Features: TR, 7/13 INCH; Center/Cutoff Frequency (fo/fc): 1542 MHz; Mounting Type: SURFACE MOUNT; Dimensions: L3.13XB3.13XH1.38 (mm)/L0.123XB0.123XH0.054 (inch); No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved