Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
Median Price
$1.748
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Distrelec
1+ parts
$1.568
100+ parts
$1.067
1k+ parts
-
10k+ parts
Mouser Electronics
$2.100
$1.420
$1.190
$1.120
DigiKey
$1.423
$1.171
$1.084
TE Connectivity
$3.900
TTI Europe
$1.034
Master Electronics
$1.510
$1.140
$1.030
Verical
$1.929
$1.406
Arrow
$1.128
Nova Conductors
$1.080
Bristol Electronics
$2.310
$1.432
$0.866
TME
$2.390
$1.670
NAC Semi
$1.810
Electro Sonic
$1.566
$1.174
$0.991
IBS Electronics
$2.025
$1.504
$1.266
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Vyrian
Schukat
$1.143
Continental Prestige Electronics
$1.058
Argo Parts USA
Advanced Electronics
$1.260
$1.147
$1.033
Abacus Technologies
Perfect Parts
Eastek
GreenTree Electronics
This product has multiple international approvals, ensuring its high quality and safety standards.
With a high rated voltage, this EMI mains filter can handle a wide range of applications.
The single phase EMI filter design helps to effectively reduce electromagnetic interference in the mains supply.
The high maximum operating temperature allows this filter to be used in a variety of environments without risk of overheating.
The low minimum operating temperature ensures reliable performance even in cold conditions.
The compact width of this filter makes it easy to integrate into different systems with limited space.
The wide operating frequency range enables this filter to be used in standard mains applications.
The moderate length of this filter allows for easy installation in various setups.
The through hole mounting type facilitates secure and stable installation of the filter.
The high rated current capacity makes this filter suitable for applications with moderate power requirements.
The height of this filter is ideal for maintaining a compact overall size while still delivering effective EMI filtering.
EMI Mains Filters RN214-3-02-2M0 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Digitron Semiconductors
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ROHM
General Semiconductor
RSHN-2006L
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 52.0; High Pot: 2500 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
FN2030-20-06
Schaffner Holding Ag
The Schaffner FN2030-20-06 is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, and ENEC-14. With dimensions of L64.8XB49.8XH40.3 (mm), it is suitable for chassis mount applications requiring effective filtering at frequencies of 50/60Hz.
3EDP
TE Connectivity's 3EDP EMI Mains Filter is UL, CSA, VDE approved with 250V rating. It features single-phase filter type, 3A rated current, and max leakage current of 0.25mA. Ideal for PCB mounting applications in electronics to reduce electromagnetic interference at operating temperatures from -10°C to 40°C.
SSHB21HS-30013
KEMET Corporation
KEMET SSHB21HS-30013 EMI Mains Filter, rated 250V, 3A, with UL approval. Features include 100 Mohm min insulation resistance, -25 to 130°C operating temp range. Ideal for single-phase EMI filtering applications.
PLH10AN1612R1P2
Murata Manufacturing
Murata Manufacturing's PLH10AN1612R1P2 is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 2.1 A Rated Current. It operates b/w -25°C to 120°C, ideal for EMI suppression in various electronic applications.
RTEN-5030D
TDK
TDK's RTEN-5030D is a 3-phase EMI filter with 30A rated current and 500V voltage. It offers approvals from UL and EN, operates b/w -25°C to 85°C, and has a high pot of 2500V. Ideal for panel mounting applications requiring effective mains filtering in industrial settings.
CMS1-6-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.1 A; Length: 9.4 mm; Mounting Type: SURFACE MOUNT; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel;
B82722S0193A041
TDK's B82722S0193A041 is a 48V single-phase EMI mains filter with 19A rated current. It operates b/w -40°C to 125°C, suitable for IEC approvals and surface mount installation. Ideal for applications requiring effective filtering at 50/60Hz frequency in compact spaces.
SCR-050-0R9A070JH
KEMET Corporation's SCR-050-0R9A070JH is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 50°C, and has dimensions of L29.0xB23.0xH27.0 mm. Ideal for EMI mains filtering applications with through hole mounting requirements.
FN2412-32-33
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
SC-05-50J
KEMET Corporation's SC-05-50J EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 105°C, suitable for single-phase applications with a rated current of 4A. Dimensions are L34.0xB23.0xH33.0mm, mounting type is through hole mount in tray packing method.
FMAD-0934-5010
Schurter Ag
Schurter Ag's FMAD-0934-5010 EMI Mains Filter is UL, CUL, VDE, ENEC-10 approved with 480V rated voltage and 50A rated current. It operates at -25 to 100°C temperature range and offers a high pot of 3000V. Ideal for three-phase applications with panel mount installation.
RN114-0.3-02-47M
Schaffner Holding Ag's RN114-0.3-02-47M EMI Mains Filter, rated at 300V and 0.3A, is UL, IEC, VDE, ENEC-10 approved. With a single-phase filter type and operating temperatures from -40 to 100°C, it's ideal for applications requiring through-hole mounting in 50/60Hz environments.
SCF-01-5000
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 15 mm; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 60 Cel;
FN406-0.5-02
FN406-0.5-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 0.5A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and dimensions of L45.0xB15.0xH28.0 mm. Ideal for single-phase EMI filtering applications in various industries.
DR334A-513AE
Bourns
DR334A-513AE by Bourns is a SINGLE PHASE EMI FILTER with 42V rated voltage, operating from -40 to 135 °C. Measuring 6mm in length, 5.8mm in width, and 3.6mm in height, it's ideal for EMI mains filtering applications at 60Hz frequency using surface mounting method.
3-103-983
Schurter Ag's 3-103-983 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
TF2514HU-101Y7R0-01
TDK TF2514HU-101Y7R0-01 is a 280V UL/CSA/IEC approved EMI mains filter with 7A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting applications due to its compact D25xH14mm dimensions.
FN3288IT-100-35-C34-R60
Schaffner Holding Ag's FN3288IT-100-35-C34-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and 1 Mohm insulation resistance. It operates b/w -40°C to 100°C, approved by IEC and UL for applications requiring high pot of 2900V and low leakage current of 7mA.
7448053201
Wuerth Elektronik & Kg
Wurth Elektronik 7448053201 is a single-phase EMI filter with a rated voltage of 250V and current of 32A. It operates b/w -40°C to 125°C, suitable for applications requiring ENEC-10 and VDE approvals. With dimensions of 23mm x 37mm x 34mm, it is designed for through-hole mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN214-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Rated Voltage: 300 V;
RN212-0.5-02-18M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Dimensions: L18.0XB12.5XH20.0 (mm)/L0.709XB0.492XH0.787 (inch);
RN212-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 300 V;
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
RN212-0.5-02
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Length: 18 mm; Height: 20 mm; Width (mm): 12.5; Operating Frequency (Hz): 50/60Hz;
RN212-1.5-02
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 125 Cel; Approvals (V): UL; VDE; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN214-1-02-15M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10; Maximum Operating Temperature: 100 Cel;
RN214-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Operating Temperature: 100 Cel; Height: 25 mm; Operating Frequency (Hz): 50/60Hz; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-4M2
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
RN214-3-02
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 25 mm; Approvals (V): UL; VDE; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN214-0.5-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-0.5-02-56M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Width (mm): 15.5; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-0.8-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch); Width (mm): 15.5; Length: 23 mm;
RN214-1.2-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN214-2-02-2M2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -40 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 15.5; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-2.5-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Rated Voltage: 300 V; Length: 23 mm; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; IEC; VDE; ENEC-10;
RN214-4-02-1M5
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Height: 25 mm; Width (mm): 15.5;
RN216-0.5-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Length: 23 mm; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
RN216-0.5-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 100 Cel; Width (mm): 15.5; Height: 25 mm; Dimensions: L23.0XB15.5XH25.0 (mm)/L0.906XB0.61XH0.984 (inch);
RN216-1-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: THROUGH HOLE MOUNT; Length: 23 mm; Minimum Operating Temperature: -40 Cel; Width (mm): 15.5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved