Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The KEMET SC-02-20G is a UL-approved EMI mains filter with 100 Mohm min insulation resistance and 250V rated voltage. It operates b/w -25°C to 105°C, has dimensions of L17.5xB14.0xH17.5 mm, and a rated current of 2A. Ideal for single-phase EMI filtering applications requiring through-hole mounting in various electronic devices.
Median Price
$2.060
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Farnell
1+ parts
$1.600
100+ parts
$1.270
1k+ parts
$1.210
10k+ parts
$1.200
Chip1Stop
$1.740
$0.981
$0.832
$0.787
Arrow
$1.900
$1.570
$1.436
$1.341
Mouser Electronics
$2.220
$1.730
$1.480
$1.310
DigiKey
$1.815
$1.688
$1.517
Newark
$2.560
$1.940
$1.770
-
Element14
$3.030
$2.320
Verical
Nova Conductors
$1.460
Vyrian
ACDS - Activité Composants Distribution Service
Advanced Electronics
$0.914
$0.905
$0.868
Ampacity Inc.
$0.960
Continental Prestige Electronics
$1.431
Argo Parts USA
Netroflash
CoreStaff
$2.503
$0.985
$0.938
Perfect Parts
High insulation resistance ensures safe operation and prevents any electrical leakage, making this product reliable for use in various applications.
Having UL approval means that this product meets strict safety standards set by Underwriters Laboratories, ensuring a high level of quality and safety.
Suitable for use with standard voltage levels, making it compatible with a wide range of electronic devices and equipment.
Designed specifically to reduce electromagnetic interference, ensuring smooth operation of connected devices and improving overall performance.
With a high maximum operating temperature, this product can withstand heat and maintain performance in demanding environments.
Capable of functioning in cold temperatures, making it suitable for use in various industrial and commercial settings.
Compact size allows for easy installation in tight spaces, making it ideal for applications where space is limited.
Optimal length for proper filtration of electromagnetic interference, ensuring that connected devices receive clean power and perform efficiently.
Secure packaging method to protect the product during transportation and storage, ensuring it arrives in perfect condition.
Through-hole mounting offers a sturdy and reliable connection, making installation straightforward and ensuring stability during operation.
Compact dimensions for easy integration into existing systems, providing additional noise filtering capabilities without taking up much space.
Suitable for applications that require a current rating of up to 2 A, making it versatile for various electronic devices and equipment.
Ideal height for proper installation and compatibility with standard electronic enclosures, ensuring a snug fit and optimal performance.
EMI Mains Filters SC-02-20G attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Diode
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BAV99
Electronic Devices
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Crimson Semiconductor
ESP-03-221-D
Cosel
The Cosel ESP-03-221-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. With a max operating temperature of 85°C and high pot of 2500V, it's ideal for DIN rail mounting in applications requiring efficient EMI mains filtering.
SSHB10HS-30006
KEMET Corporation
SSHB10HS-30006 by KEMET Corporation is a SINGLE PHASE EMI FILTER with a rated voltage of 250 V and a rated current of 3 A. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 130 °C. This filter is commonly used for EMI mains filtering applications.
CMS2-11-R
Eaton Corporation
Eaton Corporation's CMS2-11-R is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, with dimensions of L8.89xB8.89xH6.0 mm and rated current of 0.8A. Ideal for surface mount applications requiring single-phase EMI filtering in compact spaces.
SS30V-R120380
KEMET Corporation's SS30V-R120380 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1.2A. This single-phase filter operates b/w -25°C to 120°C, making it ideal for applications requiring UL approval and high-pot testing up to 500V.
LF-202U-1
KEMET LF-202U-1 EMI Mains Filter has 300 Mohm Min Insulation Resistance, 250V Rated Voltage, and -20 to 55 °C Operating Temp. UL approved for PANEL MOUNT application in SINGLE PHASE systems with 60Hz freq.
7448012501
Wuerth Elektronik & Kg
Wurth Elektronik 7448012501 is a single-phase EMI filter with 250V rated voltage and 2.5A current. With approvals from ENEC-10 and VDE, it operates b/w -40°C to 125°C making it ideal for applications requiring noise suppression in mains power circuits.
7448051012
Wurth Elektronik 7448051012 is a single-phase EMI filter with 250V rated voltage and 10A current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125°C, and dimensions of 23mm width, 34mm length, and 33mm height. Ideal for applications requiring EMI mains filtering in electronics.
RN114-0.3-02-47M
Schaffner Holding Ag
Schaffner Holding Ag's RN114-0.3-02-47M EMI Mains Filter, rated at 300V and 0.3A, is UL, IEC, VDE, ENEC-10 approved. With a single-phase filter type and operating temperatures from -40 to 100°C, it's ideal for applications requiring through-hole mounting in 50/60Hz environments.
FN2030-4-06
FN2030-4-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L50.5xB44.5xH22.3 mm, it operates at temperatures ranging from -25 to 100 °C and can handle high pot up to 1100V.
PLH10AN1612R1P2
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm; Dimensions: L18XB16XH17.5 (mm);
SSR21NH-031810
KEMET Corporation's SSR21NH-031810 is a UL approved EMI mains filter with 250V rated voltage and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, has dimensions of L23.0xB23.0xH14.5 mm, and can handle 0.3A current. Ideal for single-phase EMI filtering in various electronic applications.
B82722J2202N001
TDK
TDK B82722J2202N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
SCT25XV-150-1R6A010JH
KEMET's SCT25XV-150-1R6A010JH is a 1000V rated, 15A single-phase EMI mains filter with insulation resistance of 100 Mohm. Operating temperature ranges from -40°C to 150°C. Ideal for applications requiring through-hole mounting and effective EMI filtering in various electronic systems.
B84111F0000B030
TDK's B84111F0000B030 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 3A rated current. It offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications due to compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency.
SS11VL-R22020
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2.2 A; Width (mm): 14.5; Operating Frequency (Hz): 50Hz; Rated Voltage: 250 V; Height: 19.5 mm;
RSHN-2006L
The TDK RSHN-2006L is a single-phase EMI filter with a rated voltage of 250V and a rated current of 6A. It offers approvals from UL, CSA, and EN, making it suitable for various applications requiring EMI mains filtering. With dimensions of 52mm x 98mm x 43.4mm (W x L x H) and operating temperatures ranging from -25°C to 85°C, this panel-mount filter ensures reliable performance in diverse environments.
7448014501
Wurth Elektronik 7448014501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications. Compact at L15.0xB7.5xH16.0 (mm), it offers through-hole mounting and TIN COPPER terminal finish for efficient use in various electronic devices.
FMW-65-0001
Schurter Ag
Schurter Ag's FMW-65-0001 EMI Mains Filter is a UL, IEC, VDE, and ENEC-10 approved three-phase filter with 440V rated voltage. With a max operating temperature of 100°C and high pot of 3000V, it has a rated current of 3A. Ideal for panel mounting applications in various industries due to its compact dimensions (L66.0xB51.0xH43.0 mm).
744839010400
Wurth Elektronik 744839010400 is a 750V rated THREE PHASE EMI FILTER with 40A current. It operates b/w -40°C to 125°C, suitable for IEC approvals in applications requiring EMI mains filtering. Measuring 70mm in diameter and 39mm in height, it mounts through hole for use at 50Hz frequency.
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SC-02-20GJ
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 17.5 mm; Additional Features: INDUCTANCE 2 MILLI HENRY; Minimum Operating Temperature: -25 Cel; Approvals (V): UL;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 20 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 17.0; Length: 17.5 mm;
SC-02-20G
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Diameter (mm): 17.5; Dimensions: D17.5XH14.0 (mm)/D0.689XH0.551 (inch); Height: 14 mm;
SC-02-10GS
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 100 Mohm; Length: 15 mm; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Dimensions: L15.0XB8.5XH15.0 (mm)/L0.591XB0.335XH0.591 (inch); Packing Method: BULK; Minimum Insulation Resistance: 100 Mohm; Length: 15 mm;
SC-02-30G
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 100 Mohm; Maximum Operating Temperature: 105 Cel; Dimensions: L17.5XB14.0XH17.5 (mm)/L0.689XB0.551XH0.689 (inch); Length: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Diameter (mm): 17.5; Height: 14 mm; Minimum Operating Temperature: -25 Cel;
SC-02-10G
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Packing Method: TRAY; Width (mm): 14.0; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L17.5XB14.0XH17.5 (mm)/L0.689XB0.551XH0.689 (inch);
SC-02-20J
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 20.0; Approvals (V): UL; Rated Voltage: 250 V; Maximum Operating Temperature: 105 Cel;
SC-02-30GJ
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; Length: 17.5 mm; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 3 MILLI HENRY;
SC-02-30J
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Packing Method: TRAY; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Width (mm): 20.0;
SC-02-05GJ
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Width (mm): 17.5;
SC-02-08JS
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 26; Approvals (V): UL; Length: 29 mm; Maximum Operating Temperature: 105 Cel;
SC-02-100J
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Width (mm): 20; Minimum Operating Temperature: -25 Cel; Approvals (V): UL;
SC-02-70J
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 27 mm; Width (mm): 20; Minimum Operating Temperature: -25 Cel; High Pot: 500 V;
SC-02-E115J
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 25 mm; Approvals (V): UL; Minimum Insulation Resistance: 100 Mohm; High Pot: 500 V;
SC-02-E120J
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 100 Mohm; Length: 24 mm; Rated Voltage: 250 V; Packing Method: TRAY;
SC-02-E120JKH
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 26 mm; Width (mm): 24.5; Approvals (V): UL; Packing Method: TRAY;
SC-02-E30JKH
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 17 mm; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
SC-02-E50JKH
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -25 Cel; Width (mm): 24.5; Rated Voltage: 250 V; Packing Method: TRAY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved