Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
Median Price
$23.900
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
AZTECH Wire
$9.816
Ampacity Inc.
$22.410
Continental Prestige Electronics
$23.422
Netroflash
$22.705
$22.227
Argo Parts USA
Authorized Procurement Solutions
Having multiple approvals ensures that the product meets the necessary safety and quality standards, providing peace of mind for the user.
Suitable for use in various electrical systems and environments without the risk of damage from excessive voltage.
Effectively reduces electromagnetic interference, ensuring smooth operation of connected devices.
Capable of operating in relatively high-temperature environments without overheating or performance degradation.
Can withstand extremely low temperatures without affecting its functionality, making it suitable for a wide range of applications.
Designed to work efficiently with standard frequency power sources, ensuring compatibility and reliable performance.
Compact size allows for easy installation in limited spaces, making it ideal for various electronic devices and equipment.
High voltage tolerance ensures the product can withstand voltage spikes or surges, enhancing overall reliability and safety.
Low leakage current helps to prevent energy wastage and potential electrical hazards, promoting energy efficiency and safety.
Chassis mounting design simplifies installation and ensures secure placement within the system, minimizing the risk of disconnection or damage.
Compact and versatile dimensions make it easy to integrate into various electronic setups, offering flexibility and convenience.
Sufficient current rating to support multiple connected devices or components, ensuring stable and reliable operation under load.
Low profile design helps in fitting the filter in confined spaces, making it suitable for compact installations and applications.
EMI Mains Filters ESP-03-221 attributes and parameters. Explore more EMI Mains Filters devices from Cosel
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Manufacturer Series:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Manufacture and sale of electronic equipment and electrical equipment. Main product - DC stabilized power supply (switching power supply, etc.)
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
1N4148WT
Eic Semiconductor
New Jersey Semiconductor Products
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
SSHB21HS-10145
KEMET Corporation
KEMET SSHB21HS-10145 is a UL approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 130°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions (23mm W x 26mm L x 15.5mm H) and through-hole mounting design.
7448051804
Wuerth Elektronik & Kg
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
SCF19XV-150-1R3A006JH
SINGLE PHASE EMI FILTER;
SCR25XV-240-2R0A006JV
KEMET's SCR25XV-240-2R0A006JV is a 1000V rated, single-phase EMI mains filter with 24A current capacity. It offers high insulation resistance of 100 Mohm and operates b/w -40°C to 120°C. Ideal for through-hole mounting applications requiring effective EMI filtering in compact spaces.
5500.2655.01
Schurter Ag
Schurter Ag's 5500.2655.01 EMI Mains Filter is a single-phase filter with 250V rated voltage and 16A current. It has approvals from ENEC-10, UL, VDE and operates at temperatures ranging from -40°C to 100°C. Ideal for chassis mounting applications requiring min insulation resistance of 2 Mohm and max leakage current of 0.5 mA.
B82722A2302N001
TDK
TDK's B82722A2302N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 3A rated current. It features single-phase filtering, TIN over nickel terminals, and operates at 50/60Hz. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression.
SC-05-50J
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Operating Frequency (Hz): 50Hz; Additional Features: INDUCTANCE 5 MILLI HENRY; Maximum Operating Temperature: 60 Cel; Minimum Insulation Resistance: 100 Mohm;
RN202-0.3-02-12M
Schaffner Holding Ag
RN202-0.3-02-12M by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.3A rated current. It operates at -40 to 100 °C, suitable for UL, IEC, VDE approved applications requiring EMI mains filtering in 50/60Hz frequency range.
5VK1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 5 A; Operating Frequency (Hz): 50/60Hz; Length: 78.7 mm; Insertion Loss At Maximum Frequency: 50 dB;
CMS1-6-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.1 A; Length: 9.4 mm; Mounting Type: SURFACE MOUNT; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel;
FN256-64-52
The Schaffner Holding Ag FN256-64-52 is a UL, CSA, ENEC-14 approved 480V three-phase EMI mains filter with a rated current of 64A. It operates at temperatures from -25°C to 100°C and has a high pot of 2650V. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
6609069-6
TE Connectivity
TE Connectivity's 6609069-6 is a SINGLE PHASE EMI FILTER with 250V, 50A rating. Operating from -10°C to 40°C, it has max leakage current of 7mA. Ideal for PANEL MOUNT applications in EMI mains filtering.
B82793C0105N265
TDK's B82793C0105N265 is a SINGLE PHASE EMI FILTER with 42V rated voltage, -40 to 125 °C operating temp range, and 750V high pot. Ideal for EMI mains filtering applications, it has dimensions of L7.1xB6.0xH4.9 mm and operates at 50/60Hz frequency.
SS11V-06180-CH
SS11V-06180-CH by KEMET is a SINGLE PHASE EMI FILTER with 250V rated voltage, 0.6A rated current, and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, has dimensions of L22.0xB14.5xH21.5 mm, and withstands high pot testing up to 500V. Ideal for EMI mains filtering applications with through hole mounting requirements.
15VT1
The TE Connectivity 15VT1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 8 dB at min frequency and 35 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
FN2010-3-06
FN2010-3-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH24.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
SSR21NH-M30064
KEMET Corporation's SSR21NH-M30064 is a UL approved EMI mains filter with 250V rated voltage and 3A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L23.0xB23.0xH14.5 mm. Ideal for applications requiring single-phase EMI filtering in through-hole mounting setups.
SU9V-R01180
SU9V-R01180 by KEMET is an EMI mains filter with a rated voltage of 250V and insulation resistance of 100 Mohm. It operates b/w -25°C to 120°C, making it suitable for various applications requiring UL approval. With dimensions of 11mm x 17mm x 17mm, it is designed for through-hole mounting at a rated current of 0.1A.
FN2020-1-06
Schaffner Holding Ag's FN2020-1-06 is a UL, CSA, ENEC-14 approved 250V single-phase EMI filter with 100°C max temp and -25°C min temp. It operates at 50/60Hz frequency, has a rated current of 1.15A, and offers high pot protection up to 2000V. Ideal for chassis mount applications due to its compact dimensions of L43.5xB32.5xH29.3mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ESP-03-221-D
Cosel
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: DIN RAIL MOUNT; Minimum Operating Temperature: -40 Cel; Height: 30 mm; Maximum Leakage Current: .05 mA;
ESP-03-222
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Manufacturer Series: ESP; Length: 85 mm; High Pot: 2500 V; Height: 30 mm;
ESP-03-222-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; High Pot: 2500 V; Manufacturer Series: ESP; Approvals (V): UL; CSA; VDE; ENEC-10;
ESP-03-000-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 60Hz; Rated Voltage: 250 V; High Pot: 2500 V; Manufacturer Series: ESP;
ESP-03-000
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Approvals (V): UL; CSA; VDE; ENEC-10; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Length: 85 mm; Rated Voltage: 250 V;
ESP-03-101-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 85 mm; Manufacturer Series: ESP; Minimum Operating Temperature: -40 Cel; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch);
ESP-03-101
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Minimum Operating Temperature: -40 Cel; Approvals (V): UL; CSA; VDE; ENEC-10; Operating Frequency (Hz): 60Hz;
ESP-03-102-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Approvals (V): UL; CSA; VDE; ENEC-10; Rated Voltage: 250 V; Minimum Operating Temperature: -40 Cel; Length: 85 mm;
ESP-03-102
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Manufacturer Series: ESP; Rated Voltage: 250 V; Approvals (V): UL; CSA; VDE; ENEC-10; Mounting Type: CHASSIS MOUNT;
ESP-03-331-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Leakage Current: .075 mA; Manufacturer Series: ESP; Minimum Operating Temperature: -40 Cel; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch);
ESP-03-331
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Leakage Current: .075 mA; Rated Voltage: 250 V; Approvals (V): UL; CSA; VDE; ENEC-10; Maximum Operating Temperature: 85 Cel;
ESP-03-332-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 30 mm; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
ESP-03-332
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Manufacturer Series: ESP; Approvals (V): UL; CSA; VDE; ENEC-10; Rated Voltage: 250 V; Operating Frequency (Hz): 60Hz;
ESP-03-471-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -40 Cel; Manufacturer Series: ESP; Maximum Leakage Current: .1 mA; Mounting Type: DIN RAIL MOUNT;
ESP-03-471
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Manufacturer Series: ESP; Approvals (V): UL; CSA; VDE; ENEC-10; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Maximum Leakage Current: .1 mA;
ESP-03-472-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 60Hz; Rated Voltage: 250 V; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Maximum Operating Temperature: 85 Cel;
ESP-03-472
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Approvals (V): UL; CSA; VDE; ENEC-10; Rated Voltage: 250 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
ESP-03-681-D
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 85 mm; Maximum Operating Temperature: 85 Cel; Rated Voltage: 250 V; High Pot: 2500 V;
ESP-03-681
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Operating Temperature: 85 Cel; Operating Frequency (Hz): 60Hz; Length: 85 mm; Height: 30 mm;
ESP-06-331
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Mounting Type: CHASSIS MOUNT; Approvals (V): UL; CSA; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved