Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER;
Median Price
$14.920
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$10.289
1k+ parts
$9.450
10k+ parts
-
Mouser Electronics
Newark
$15.370
$9.730
Verical
$14.238
TME
$13.590
$10.220
Nova Conductors
Corohmni
$2.285
Modulus Dynamics
$2.332
Ampacity Inc.
$7.140
Continental Prestige Electronics
$10.000
$8.210
Argo Parts USA
Aranea Global
EMI Mains Filters SCF29XV-250-2R2A008JH attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Filter Type:
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
ROHM
Nte Electronics
10VV1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Rated Voltage: 120 V; Height: 38.9 mm; Approvals (V): UL; CSA; VDE;
SSRH7H-M20016
KEMET Corporation
KEMET Corporation's SSRH7H-M20016 is a UL approved EMI mains filter with 250V rated voltage and 2A rated current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperature range. Ideal for applications requiring high insulation resistance of 100 Mohm, such as industrial electronics and power supplies.
20VSK6
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Length: 113.3 mm; Rated Voltage: 120 V; Insertion Loss At Maximum Frequency: 48 dB;
RN212-0.5-02-18M
Schaffner Holding Ag
RN212-0.5-02-18M by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.5A rated current. It operates b/w -40°C to 100°C, suitable for applications requiring EMI mains filtering. With UL, IEC, VDE, and ENEC-10 approvals, it's ideal for through-hole mounting in various electronic devices.
6EHT3
TE Connectivity
TE Connectivity's 6EHT3 is a CSA, UL, VDE approved EMI mains filter with 250V rated voltage and 6A rated current. With single-phase filter type, it operates at -10 to 40°C temperatures and offers high pot of 2250V. Ideal for panel mounting applications due to its compact dimensions of L85.9xB54.6xH46 mm (L3.38xB2.15xH1.81 inch).
CMS2-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 2.8 A; Maximum Operating Temperature: 160 Cel; Packing Method: TAPE AND REEL; Width (mm): 8.89; Manufacturer Series: CMS;
16BCF6R
TE Connectivity's 16BCF6R is a 480V, 16A THREE PHASE EMI Filter with max leakage current of 6.9mA. Ideal for panel mounting, it operates b/w -10°C to 40°C at 50Hz, providing effective EMI suppression in industrial applications.
SCF29XV-050-1R0A044JH
FN2090-16-06
The Schaffner Holding Ag FN2090-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 17.9A. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and is panel mountable. Ideal for applications requiring effective EMI filtering in electrical systems.
20EQ1
SINGLE PHASE EMI FILTER; Maximum Frequency: .02 MHz; Rated Current: 20 A; Height: 57.9 mm; Insertion Loss At Maximum Frequency: 10 dB; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
B84142-B16-R
TDK
TDK's B84142-B16-R is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 16A rated current. Featuring 2700V high pot and 3.5mA max leakage current, it operates at 50/60Hz frequency. Ideal for panel mounting applications, its compact dimensions of L121.0xB113.0xH61.0mm make it suitable for various electronic devices requiring effective EMI mains filtering.
10510
Murrelektronik
10510 by Murrelektronik is a THREE PHASE EMI FILTER with a rated voltage of 440 V and a rated current of 3 A. It has a compact design, measuring 39 mm in width, 65 mm in length, and 107 mm in height. This filter is suitable for DIN RAIL MOUNT installation and is approved for use according to EN standards.
FN7612-10-M3
FN7612-10-M3 by Schaffner Holding Ag is an EMI mains filter with a rated voltage of 300V and a max operating temperature of 100°C. It features approvals from UL and ENEC-14, with a high pot of 3000V. This AC feed through capacitor has a rated current of 10A and is ideal for panel mount applications in various industries.
FIL-1S-1-6A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Height: 99 mm; Length: 99.5 mm;
7448012501
Wuerth Elektronik & Kg
Wurth Elektronik 7448012501 is a single-phase EMI filter with 250V rated voltage and 2.5A current. With approvals from ENEC-10 and VDE, it operates b/w -40°C to 125°C making it ideal for applications requiring noise suppression in mains power circuits.
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
8-1609148-2
TE Connectivity's 8-1609148-2 EMI Mains Filter is a THREE PHASE filter with 520V rated voltage and 250A rated current. It operates b/w -10°C to 50°C, with max leakage current of 222mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
3-103-983
Schurter Ag
Schurter Ag's 3-103-983 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
60AYT6C
The TE Connectivity 60AYT6C is a UL, CSA, VDE approved EMI mains filter with insertion loss of 12 dB at min frequency and 45 dB at max frequency. It operates at 50/60Hz, rated for 250V and has a rated current of 60A. Ideal for three-phase EMI filtering in applications requiring high voltage protection up to 1450V.
6EQ1
SINGLE PHASE EMI FILTER; Maximum Frequency: .02 MHz; Rated Current: 6 A; Dimensions: L113.5XB57.7XH45.7 (mm)/L4.47XB2.27XH1.8 (inch); Length: 113.5 mm; Approvals (V): UL; CSA; VDE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SCF25-08-1300
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 8 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 70 Cel; Height: 32 mm;
SCF20-05-550
KEMET Corporation's SCF20-05-550 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 5A. Operating b/w -25°C to 70°C, it has dimensions of L25.0xB15.5xH25.0 mm and is designed for through-hole mounting applications at 50Hz frequency. Ideal for noise suppression in electronic equipment requiring EMI filtering in compact spaces.
SINGLE PHASE EMI FILTER; Rated Current: 5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Width (mm): 15.5;
SCF25XV-130-1R5A012JV
SCF25XV-310-2R3A004JV
SCF25XV-170-1R7A009JV
SCF25XV-240-2R0A006JV
SCF25XV-280-2R1A005JV
SCF29XV-270-2R3A006JV
SCF20-05-1100
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 15.5; Maximum Operating Temperature: 50 Cel; Height: 25 mm; No. of Terminals: 4;
SCF29XV-210-2R1A010JV
SCF25XV-190-1R8A008JH
SCF25XV-240-2R0A006JH
SCF29XV-200-2R0A011JV
SCF29XV-250-2R2A008JV
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved