Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B82722J2202N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
Median Price
$2.475
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$1.820
100+ parts
$1.230
1k+ parts
$1.070
10k+ parts
-
Mouser Electronics
$2.410
$1.630
$1.410
$1.310
DigiKey
$1.627
$1.317
Bürklin Elektronik
$2.540
$2.030
$1.690
Arrow
$2.889
$1.712
Newark
$3.010
$1.850
$1.450
$1.300
Element14
$3.490
$2.370
$2.040
Chip1Stop
$5.370
$1.290
$0.836
$0.803
Verical
$1.010
$0.961
$0.927
RS (Exports)
$2.145
$1.726
Nova Conductors
$1.753
TME
$1.830
$1.220
$1.100
Vyrian
VNN
LIBRA Elektronik GmbH
Ampacity Inc.
$1.140
Argo Parts USA
Continental Prestige Electronics
$2.760
$1.440
$1.280
Corohmni
$2.790
Aztec Data Supply Inc.
$2.989
Perfect Parts
Eastek
GreenTree Electronics
Having multiple approvals ensures that this product meets international safety standards, making it a reliable choice.
Operating at 250 V, this filter is suitable for a wide range of applications.
Being a single-phase EMI filter ensures effective electromagnetic interference suppression, improving overall system performance.
TIN terminal finish provides good conductivity and corrosion resistance, extending the product's lifespan.
Narrow width of 16.1 mm saves space and allows for compact installations.
Operating at both 50 Hz and 60 Hz, this filter is versatile and compatible with different power systems.
With a length of 23.3 mm, this filter is compact and can fit in tight spaces.
Tray packing ensures safe transportation and storage of the product, reducing the risk of damage.
Through-hole mount allows for secure and stable installation of the filter onto circuit boards.
With a rated current of 2 A, this filter can handle moderate levels of electrical current, suitable for many applications.
Standing at 25.4 mm, this filter strikes a balance between compact size and effective performance.
EMI Mains Filters B82722J2202N001 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
Operating Frequency (Hz):
Packing Method:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
B82722J2202N001 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Comchip Technology
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
60AYT6C
Corcom
THREE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 60 A; Minimum Frequency: .05 MHz; Mounting Type: PANEL MOUNT; Insertion Loss At Minimum Frequency: 12 dB;
NBC-20-472-D
Cosel
Cosel NBC-20-472-D is a 250V UL/CSA/VDE/ENEC-10 approved EMI mains filter with 20A rated current. It operates b/w -40°C to 85°C, offers high pot of 2500V, and has max leakage current of 1mA. Ideal for single-phase applications, it's DIN rail mountable with dimensions of L92.0xB53.0xH41.0mm.
SN13-500
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 18 mm; Packing Method: TRAY; Diameter (mm): 31; Mounting Type: THROUGH HOLE MOUNT;
FN343-10-05
Schaffner Holding Ag
FN343-10-05 by Schaffner Holding Ag is a UL, CSA, and ENEC-14 approved single-phase EMI filter with a rated voltage of 250V. It operates at temperatures ranging from -25°C to 100°C and has a max leakage current of 0.34mA. This panel mount filter is ideal for applications requiring effective electromagnetic interference suppression in the frequency range of 50/60Hz.
SN8S-30P2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 19 mm; Width (mm): 17; Height: 10.5 mm; Mounting Type: THROUGH HOLE MOUNT;
SU9VF-02100
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
FN2410-32-33
FN2410-32-33 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 32A rated current. Operating at temperatures from -25°C to 100°C, it offers high pot of 1100V and max leakage current of 3.4mA. Ideal for DIN rail mounting applications with dimensions of L108.0xB93.0xH76.0mm, this filter operates at an operating frequency of 400Hz.
CMS3-14-R
Eaton Corporation
Eaton Corporation's CMS3-14-R is a UL-approved EMI mains filter with 4 terminals. It features single-phase filtering, rated current of 0.75A, and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L11.43xB11.43xH6.0mm and uses Tin/Silver/Copper terminal finish.
SU9VF-07015
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 17 mm; Width (mm): 11; High Pot: 500 V; Height: 17 mm;
SS26V-R100330
KEMET Corporation's SS26V-R100330 EMI Mains Filter is UL approved with 250V rated voltage and 1A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L26.0xB20.5xH30.5 mm. Ideal for single-phase EMI filtering applications in various electronic devices.
B82722J2202N001
FN9246-10-06
SINGLE PHASE EMI FILTER;
CMS1-1-R
Eaton Corporation's CMS1-1-R EMI Mains Filter is a UL approved single-phase filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 7A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
NAH-10-472
The Cosel NAH-10-472 is a single-phase EMI filter with 250V rated voltage and 10A rated current. It has approvals from UL, CSA, VDE, and ENEC-10 for quality assurance. Ideal for chassis mount applications in electronics to reduce electromagnetic interference at operating temperatures ranging from -40°C to 85°C.
1600APS12L
TE Connectivity
TE Connectivity's 1600APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 1600A. With a max operating temperature of 50°C, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
SCF19XV-220-1R6A004JH
SC-08-E075J
KEMET Corporation's SC-08-E075J is a UL approved EMI mains filter with 250V rated voltage and 8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot rating of 500V. Ideal for single-phase applications, this filter is mounted through hole and measures 16mm in width by 25mm in length at a height of 25.5mm.
NAC-20-472-D
The Cosel NAC-20-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0mm, it operates b/w -40°C to 85°C making it ideal for DIN rail mounting in various applications requiring efficient EMI mains filtering at 60Hz frequency.
SC-02-20G
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Diameter (mm): 17.5; Dimensions: D17.5XH14.0 (mm)/D0.689XH0.551 (inch); Height: 14 mm;
1-6609028-9
TE Connectivity 1-6609028-9 is a UL, CSA, VDE approved EMI mains filter with 6dB insertion loss at 0.15MHz and 50dB at 30MHz. It operates at 50/60Hz frequency, rated for 250V and 20A current. Ideal for panel mount applications in electronics to reduce electromagnetic interference.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82722A2102N001
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
B82722A2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Width (mm): 22.3; Length: 22.7 mm; Terminal Finish: TIN OVER NICKEL;
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82722J2102N001
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
B82722J2302N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e3; Packing Method: TRAY; Terminal Finish: TIN; Approvals (V): UL; EN; IEC; VDE;
B82793C0105N265
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Minimum Operating Temperature: -40 Cel; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); Width (mm): 6; Length: 7.1 mm;
B82722-A2102-N1
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 22.7 mm; Width (mm): 22.3; Operating Frequency (Hz): 50Hz; Terminal Finish: TIN OVER NICKEL;
B82732F2901B001
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
B82722A2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Height: 13.3 mm; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; Operating Frequency (Hz): 50/60Hz;
B82722J2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.1;
B82722-A2302-N1
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Terminal Finish: TIN OVER NICKEL; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): EN; UL; VDE;
B82722A2202N002
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e3; Rated Voltage: 250 V; Height: 13.3 mm;
B82722A2302N001
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; JESD-609 Code: e3;
B82722S0193A041
SINGLE PHASE EMI FILTER; Rated Current: 19 A; Height: 12.7 mm; Length: 27.94 mm; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT;
B82722J2202N002
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 16.1; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; EN; IEC; VDE; Height: 25.4 mm;
B82722J2252N001
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Length: 23.3 mm; Rated Voltage: 250 V; Packing Method: TRAY; Operating Frequency (Hz): 50/60Hz;
B82722J2501N022
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Terminal Finish: TIN OVER NICKEL; Rated Voltage: 250 V; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
B82722J2202N020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; EN; IEC; VDE; Rated Voltage: 250 V; Height: 25.4 mm; JESD-609 Code: e3;
B82722J2301N002
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3; Approvals (V): UL; EN; IEC; VDE; Operating Frequency (Hz): 50/60Hz;
B82722J2801N020
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Length: 23.3 mm; Packing Method: TRAY; Operating Frequency (Hz): 50/60Hz; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved