Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B82722A2202N002 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, 50/60Hz operating frequency, and through-hole mounting. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
Median Price
$2.440
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.653
1k+ parts
$1.420
10k+ parts
$1.340
Nova Conductors
$1.937
-
Vyrian
VNN
Corohmni
$1.031
Continental Prestige Electronics
$1.898
Argo Parts USA
Netroflash
Ampacity Inc.
$2.260
Having approvals from multiple organizations ensures that the product meets safety and quality standards, making it a reliable choice.
The high rated voltage capacity allows this filter to be used in various applications without the risk of damage from electrical surges.
A single-phase EMI filter provides effective noise suppression and interference reduction in electrical systems, ensuring a clean power supply.
The terminal finish of tin over nickel provides good conductivity and corrosion resistance, prolonging the lifespan of the product.
With a compact width of 22.3mm, this EMI filter can fit into tight spaces and compact electronic devices easily.
The wide operating frequency range allows this filter to be used in environments where the frequency may vary, ensuring compatibility with different systems.
The length of 22.7mm makes this filter compact and suitable for applications where space is limited.
The tray packing method ensures safe transportation and storage of the filters, reducing the risk of damage during handling.
The through-hole mounting type makes it easy to install the EMI filter securely on circuit boards, providing stability and reliability in operation.
With a rated current of 2A, this filter is suitable for applications that require moderate current levels, offering effective EMI filtering without the risk of overload.
The low height of 13.3mm allows for easy integration of the filter into electronic systems without taking up too much space, making it a versatile choice for compact designs.
EMI Mains Filters B82722A2202N002 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
Operating Frequency (Hz):
Packing Method:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
B82722A2202N002 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Micro Commercial Components
BAV99
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
General Semiconductor
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
B82793C0105N265
TDK
TDK's B82793C0105N265 is a SINGLE PHASE EMI FILTER with 42V rated voltage, -40 to 125 °C operating temp range, and 750V high pot. Ideal for EMI mains filtering applications, it has dimensions of L7.1xB6.0xH4.9 mm and operates at 50/60Hz frequency.
FMW-65-0001
Schurter Ag
Schurter Ag's FMW-65-0001 EMI Mains Filter is a UL, IEC, VDE, and ENEC-10 approved three-phase filter with 440V rated voltage. With a max operating temperature of 100°C and high pot of 3000V, it has a rated current of 3A. Ideal for panel mounting applications in various industries due to its compact dimensions (L66.0xB51.0xH43.0 mm).
10VR6
TE Connectivity
The TE Connectivity 10VR6 EMI Mains Filter has a rated voltage of 250V and insertion loss ranging from 5dB to 65dB. With approvals from UL, CSA, and VDE, it is suitable for single-phase applications with an operating frequency of 50/60Hz. This panel-mount filter measures L85.1xB52.6xH38.9mm and can handle a rated current of 10A while offering high pot protection up to 2250V.
LF-202A
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 300 Mohm; Width (mm): 32.0; Maximum Leakage Current: 1 mA; Dimensions: L64.0XB32.0XH25.0 (mm)/L2.52XB1.26XH0.984 (inch);
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
744839010400
Wuerth Elektronik & Kg
Wurth Elektronik 744839010400 is a 750V rated THREE PHASE EMI FILTER with 40A current. It operates b/w -40°C to 125°C, suitable for IEC approvals in applications requiring EMI mains filtering. Measuring 70mm in diameter and 39mm in height, it mounts through hole for use at 50Hz frequency.
30VSK6
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
SS11V-R10093-CH
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 50Hz; Length: 22 mm; No. of Terminals: 4; Height: 21.5 mm;
FN3258-42-33
Schaffner Holding Ag
Schaffner Holding Ag's FN3258-42-33 EMI Mains Filter is a UL, CSA, and ENEC-14 approved three-phase filter with 480V rated voltage and 42A current. With a compact size of L280.0xB50.0xH85.0 mm, it operates b/w -25°C to 100°C making it ideal for panel mounting applications requiring high pot of 2650V and max leakage current of 33mA at 60Hz frequency.
EH20-1.5-02-1M8
EH20-1.5-02-1M8 by Schaffner Holding Ag is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 1.5A rated current. Operating at -25 to 100 °C, it offers high pot of 2000V and operates at 400Hz frequency. Ideal for applications requiring EMI mains filtering in compact spaces with through hole mounting.
JAC-10-103-D
Cosel
JAC-10-103-D by Cosel is a 3-phase EMI filter with UL and CSA approvals. It has a rated voltage of 500V, rated current of 10A, and max leakage current of 1mA. Ideal for industrial applications requiring efficient EMI mains filtering in a compact DIN rail mount design.
CMS1-11-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.35 A; Width (mm): 7.2; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel; Additional Features: INDUCTANCE 100 MICRO HENRY;
SCF20-05-550
KEMET Corporation
KEMET Corporation's SCF20-05-550 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 5A. Operating b/w -25°C to 70°C, it has dimensions of L25.0xB15.5xH25.0 mm and is designed for through-hole mounting applications at 50Hz frequency. Ideal for noise suppression in electronic equipment requiring EMI filtering in compact spaces.
RSEN-2010D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 35 mm; Maximum Leakage Current: 1 mA; Approvals (V): UL; CSA; EN; Maximum Operating Temperature: 85 Cel;
2-1609037-9
TE Connectivity's 2-1609037-9 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. Ideal for EMI mains filtering applications, it operates b/w -10°C to 40°C at 50Hz frequency and mounts on panels.
RSHN-2006L
The TDK RSHN-2006L is a single-phase EMI filter with a rated voltage of 250V and a rated current of 6A. It offers approvals from UL, CSA, and EN, making it suitable for various applications requiring EMI mains filtering. With dimensions of 52mm x 98mm x 43.4mm (W x L x H) and operating temperatures ranging from -25°C to 85°C, this panel-mount filter ensures reliable performance in diverse environments.
RN212-1.5-02
Schaffner Holding Ag's RN212-1.5-02 EMI Mains Filter is UL and VDE approved, rated for 250V with a 1.5A current. With a single-phase filter type, it operates b/w -40°C to 125°C, suitable for through-hole mounting in applications requiring effective electromagnetic interference suppression at 50/60Hz frequencies.
UF1717V-300Y1R2-03
UF1717V-300Y1R2-03 by TDK is a single-phase EMI mains filter with 4 terminals and rated voltage of 280V. It offers a min insulation resistance of 100 Mohm, operates at temperatures from -20 to 120 °C, and has UL, CSA, IEC approvals. Ideal for applications requiring noise suppression in electrical systems.
3-123-459
3-123-459 by Schurter Ag is a THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 16A. It has approvals from IEC, UL, VDE for applications requiring EMI mains filtering. With a high pot of 2750V and operating temperatures ranging from -40 to 100 °C, it is suitable for panel mount installations in industrial settings.
FIL-1S-1-6A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 45; Height: 99 mm; Length: 99.5 mm; Rated Voltage: 230 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82722A2102N001
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
B82722A2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Width (mm): 22.3; Length: 22.7 mm; Terminal Finish: TIN OVER NICKEL;
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82722J2102N001
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
B82722J2302N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e3; Packing Method: TRAY; Terminal Finish: TIN; Approvals (V): UL; EN; IEC; VDE;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Minimum Operating Temperature: -40 Cel; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); Width (mm): 6; Length: 7.1 mm;
B82722-A2102-N1
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 22.7 mm; Width (mm): 22.3; Operating Frequency (Hz): 50Hz; Terminal Finish: TIN OVER NICKEL;
B82722J2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; JESD-609 Code: e3; Height: 25.4 mm; Terminal Finish: TIN; Operating Frequency (Hz): 50/60Hz;
B82732F2901B001
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
B82722A2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Height: 13.3 mm; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; Operating Frequency (Hz): 50/60Hz;
B82722J2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.1;
B82722-A2302-N1
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Terminal Finish: TIN OVER NICKEL; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): EN; UL; VDE;
B82722A2302N001
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; JESD-609 Code: e3;
B82722S0193A041
SINGLE PHASE EMI FILTER; Rated Current: 19 A; Height: 12.7 mm; Length: 27.94 mm; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT;
B82722A2132N001
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Height: 13.3 mm; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT; Length: 22.7 mm;
B82722A2301N002
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Terminal Finish: TIN OVER NICKEL; Width (mm): 22.3; JESD-609 Code: e3; Packing Method: TRAY;
B82722-A2202-N1
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 22.3; Approvals (V): EN; UL; VDE; Height: 13.3 mm;
B82722A2202N020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; JESD-609 Code: e3; Height: 13.3 mm; Width (mm): 22.3;
B82722A2252N001
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Rated Voltage: 250 V; Packing Method: TRAY; Terminal Finish: TIN OVER NICKEL; Approvals (V): UL; EN; IEC; VDE;
B82722A2801N020
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Length: 22.7 mm; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; Width (mm): 22.3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved