Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DR334A-513AE by Bourns is a SINGLE PHASE EMI FILTER with 42V rated voltage, operating from -40 to 135 °C. Measuring 6mm in length, 5.8mm in width, and 3.6mm in height, it's ideal for EMI mains filtering applications at 60Hz frequency using surface mounting method.
Median Price
$0.743
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$0.311
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.505
Chip1Stop
$0.776
DigiKey
$1.260
$0.753
$0.657
RS (Exports)
$1.134
$0.765
Mouser Electronics
$0.540
Element14
$0.702
$0.580
Nova Conductors
Ampacity Inc.
$0.264
Continental Prestige Electronics
$0.736
$0.546
$0.417
$0.410
Argo Parts USA
Aranea Global
This EMI mains filter is suitable for use with devices operating at 42V, making it a reliable choice for applications within this voltage range.
The single-phase EMI filter design helps in reducing electromagnetic interference in the power supply, ensuring stable operation of connected equipment.
With a high maximum operating temperature of 135°C, this EMI mains filter can withstand elevated temperatures and maintain its performance in demanding environments.
The ability to operate at temperatures as low as -40°C makes this EMI filter suitable for use in a wide range of temperature conditions.
The compact width of 5.8mm allows for easy integration of this EMI filter into space-constrained applications without compromising on performance.
This EMI mains filter is designed to operate at a frequency of 60Hz, ensuring compatibility with standard power supply systems.
The length of 6mm provides a balance between compact size and effective filtration, making this EMI mains filter suitable for various applications.
The TR embossed packing method in a 13-inch size ensures that the EMI filter is securely packaged for transportation and storage, preventing damage during handling.
The surface mount design of this EMI mains filter enables easy and convenient installation on circuit boards, saving space and streamlining the assembly process.
The low height of 3.6mm allows for a slim profile and space-saving installation of this EMI filter in compact electronic devices and systems.
EMI Mains Filters DR334A-513AE attributes and parameters. Explore more EMI Mains Filters devices from Bourns
Additional Features:
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Voltage:
Width (mm):
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Leshan Radio
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RSHN-2006L
TDK
The TDK RSHN-2006L is a single-phase EMI filter with a rated voltage of 250V and a rated current of 6A. It offers approvals from UL, CSA, and EN, making it suitable for various applications requiring EMI mains filtering. With dimensions of 52mm x 98mm x 43.4mm (W x L x H) and operating temperatures ranging from -25°C to 85°C, this panel-mount filter ensures reliable performance in diverse environments.
10VW1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .5 mA; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 65 dB;
FIL-1S-1-1A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Width (mm): 27; Mounting Type: PANEL MOUNT;
FN406-0.5-02
Schaffner Holding Ag
FN406-0.5-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 0.5A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and dimensions of L45.0xB15.0xH28.0 mm. Ideal for single-phase EMI filtering applications in various industries.
8-1609148-2
TE Connectivity
TE Connectivity's 8-1609148-2 EMI Mains Filter is a THREE PHASE filter with 520V rated voltage and 250A rated current. It operates b/w -10°C to 50°C, with max leakage current of 222mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
RN112-0.8-02-10M
Schaffner Holding Ag's RN112-0.8-02-10M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI filter with 300V rated voltage and 0.8A current. Operating at -40 to 100 °C, it's ideal for applications requiring EMI mains filtering in a compact L17.7xB17.1xH12.6 mm through-hole mount design.
SC-07-30JM
KEMET Corporation
KEMET Corporation's SC-07-30JM is a UL-approved EMI mains filter with 100 Mohm insulation resistance, 250V rated voltage, and 7A current. This single-phase filter operates b/w -25°C to 120°C and has a high pot of 500V. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression in compact spaces.
SSRH7HS-M04467
SSRH7HS-M04467 by KEMET is a UL-approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures from -25°C to 120°C, rated for 250V and 0.4A. This single-phase filter, measuring 14.5mm x 18mm x 12mm, is designed for through-hole mounting applications.
RN214-3-02-2M0
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
FN2412-32-33
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
7448680100
Wuerth Elektronik & Kg
Wurth Elektronik 7448680100 is a SINGLE PHASE EMI FILTER with 250V rating, 9.5A current, and -40 to 60°C operating temperature range. Ideal for IEC-approved applications requiring EMI mains filtering in through-hole mounting setups.
SS11VL-R22020
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2.2 A; Width (mm): 14.5; Operating Frequency (Hz): 50Hz; Rated Voltage: 250 V; Height: 19.5 mm;
744834407
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
6609046-7
TE Connectivity's 6609046-7 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
3-103-712
Schurter Ag
Schurter Ag's 3-103-712 is a SINGLE PHASE EMI FILTER with 240V rated voltage, CSA, EN, IEC, UL approvals. It operates at -40 to 100°C and has a max leakage current of 0.5mA. Ideal for PANEL MOUNT applications with 12A rated current.
SSR21NV-M20125
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Height: 27 mm; Width (mm): 16; Minimum Insulation Resistance: 100 Mohm;
B82722A2301N001
The TDK B82722A2301N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, 50/60Hz operating frequency, and tin over nickel terminal finish. Ideal for applications requiring effective electromagnetic interference suppression in electronic devices.
FN2020-16-06
Schaffner Holding Ag's FN2020-16-06 EMI Mains Filter is a single-phase filter with 250V rated voltage and 18.4A rated current. It has UL, CSA, and ENEC-14 approvals, operates at -25 to 100°C, and offers high pot protection up to 2000V. Ideal for chassis mounting applications requiring effective filtering in the frequency range of 50/60Hz.
1VB1
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 1 A; Operating Frequency (Hz): 50/60Hz; Insertion Loss At Minimum Frequency: 15 dB; Manufacturer Series: B;
10VR6
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DR334A-113BE
Bourns
SINGLE PHASE EMI FILTER; Width (mm): 5.8; Additional Features: AEC-Q200; Height: 3.6 mm; Packing Method: TR, EMBOSSED, 13 INCH; Mounting Type: SURFACE MOUNT;
DR334A-105BE
SINGLE PHASE EMI FILTER; Mounting Type: SURFACE MOUNT; Length: 6 mm; Additional Features: AEC-Q200; Height: 3.6 mm; Rated Voltage: 42 V;
DR334A-253AE
SINGLE PHASE EMI FILTER; Width (mm): 5.8; Length: 6 mm; Height: 3.6 mm; Rated Voltage: 42 V; Operating Frequency (Hz): 60Hz;
DR334A-474BE
SINGLE PHASE EMI FILTER; Width (mm): 5.8; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 135 Cel; Height: 3.6 mm; Rated Voltage: 42 V;
DR334A-104AE
SINGLE PHASE EMI FILTER; Rated Voltage: 42 V; Mounting Type: SURFACE MOUNT; Additional Features: AEC-Q200; Minimum Operating Temperature: -40 Cel; Height: 3.6 mm;
DR334A-475BE
SINGLE PHASE EMI FILTER; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -40 Cel; Width (mm): 5.8; Additional Features: AEC-Q200; Height: 3.6 mm;
DR331-475BES
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Width (mm): 5.4; Length: 7.3 mm; Rated Voltage: 42 V; Approvals (V): UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved