Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7448030509 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A rated current. Operating from -40 to 125 °C, it's ideal for EMI mains filtering in various applications due to its compact dimensions of L22.0XB13.5XH25.0 mm and through-hole mounting design.
Median Price
$12.000
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$10.580
100+ parts
$7.150
1k+ parts
-
10k+ parts
Chip1Stop
$10.900
$8.980
$6.990
$6.960
Distrelec
$11.197
$7.998
Bürklin Elektronik
$10.550
$8.110
DigiKey
$12.260
$10.773
$8.284
Mouser Electronics
$9.180
$8.280
Element14
$13.609
$9.190
$9.176
Newark
$14.260
$12.700
$10.180
$9.980
Verical
$8.240
Nova Conductors
$8.720
Vyrian
VNN
Martec Srl
Aztec Data Supply Inc.
$0.810
Corohmni
$2.222
Ampacity Inc.
$7.360
Semicontronic
$7.176
$7.139
Netroflash
Continental Prestige Electronics
$10.860
$6.860
Kepictronics
Authorized Procurement Solutions
Argo Parts USA
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Higher rated voltage ensures compatibility with a wide range of electrical systems, making this product versatile and suitable for various applications.
Single phase EMI filter design helps in effectively reducing electromagnetic interference, ensuring smooth operation of connected equipment.
High maximum operating temperature allows for reliable performance even in harsh environmental conditions, making this product durable and long-lasting.
Low minimum operating temperature ensures that the filter can function effectively even in cold temperatures, enhancing its usability in different environments.
Compact width of the filter enables easy integration into existing setups without taking up much space, making it a convenient choice for installations with limited room.
Designed for standard 50Hz operating frequency, ensuring compatibility with most power systems for seamless performance.
Optimal length for efficient filtration of electromagnetic interference, helping in reducing noise and maintaining the quality of power supply to connected devices.
Tray packing method provides protection during transit and storage, ensuring that the filter reaches the customer in perfect condition.
Through hole mounting type offers secure and stable installation, preventing the filter from shifting or coming loose during operation.
Compact dimensions make this filter space-efficient and easy to accommodate in various setups without compromising on performance.
With a rated current of 5A, this filter can handle moderate electrical loads, ensuring its suitability for a wide range of applications.
Optimal height for accommodating necessary components and ensuring proper airflow within the filter, contributing to its efficient operation.
EMI Mains Filters 7448030509 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138PS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
National Semiconductor
Infinex
Philips Semiconductors
744839010400
Wuerth Elektronik & Kg
Wurth Elektronik 744839010400 is a 750V rated THREE PHASE EMI FILTER with 40A current. It operates b/w -40°C to 125°C, suitable for IEC approvals in applications requiring EMI mains filtering. Measuring 70mm in diameter and 39mm in height, it mounts through hole for use at 50Hz frequency.
1VB1
TE Connectivity
1VB1 by TE Connectivity is a SINGLE PHASE EMI FILTER with UL, CSA, VDE approvals. It offers 15 dB insertion loss at 0.15 MHz and 50 dB at 30 MHz. Ideal for applications requiring EMI mains filtering in a compact panel mount design.
UF1717V-300Y1R2-03
TDK
UF1717V-300Y1R2-03 by TDK is a single-phase EMI mains filter with 4 terminals and rated voltage of 280V. It offers a min insulation resistance of 100 Mohm, operates at temperatures from -20 to 120 °C, and has UL, CSA, IEC approvals. Ideal for applications requiring noise suppression in electrical systems.
1-6609036-6
TE Connectivity's 1-6609036-6 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 40A. It operates b/w -10°C to 40°C, with max leakage current of 0.75mA. Ideal for panel mounting applications requiring effective electromagnetic interference suppression.
CMS1-14-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: .85 A; Additional Features: INDUCTANCE 205 MICRO HENRY; Approvals (V): UL; Height: 2.6 mm; Maximum Operating Temperature: 160 Cel;
MR-2021
KEMET Corporation
The KEMET MR-2021 EMI Mains Filter is rated for 250V with a max operating temperature of 55°C. It has a min insulation resistance of 300 Mohm and a rated current of 2A, making it suitable for single-phase EMI filtering applications. Approved by CSA and UL, this filter has dimensions of 40mm x 49mm x 27mm and can be chassis mounted.
60AYT6C
Corcom
THREE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 60 A; Minimum Frequency: .05 MHz; Mounting Type: PANEL MOUNT; Insertion Loss At Minimum Frequency: 12 dB;
5500.2001
Schurter Ag
The Schurter Ag 5500.2001 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates b/w -25 to 85°C, and offers high pot protection up to 2700V. This single-phase filter with through-hole mount is ideal for applications requiring effective EMI filtering at 60Hz frequency.
SU9V-02080
SU9V-02080 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage. It offers 100 Mohm min insulation resistance, 0.2A rated current, and operates b/w -25°C to 120°C. Ideal for single-phase EMI filtering applications due to its compact dimensions of L17.0xB11.0xH17.0 mm.
SCF47B-400-1R8C040J
KEMET Corporation's SCF47B-400-1R8C040J is a UL-approved EMI mains filter with 500V rated voltage and 40A rated current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this filter is mounted through hole and comes in a 70mm length tray packing.
600APS12L
TE Connectivity's 600APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a high pot of 2200V and max leakage current of 270mA. Ideal for panel mounting applications, this filter operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
SS11VL-R22020
SS11VL-R22020 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage, 2.2A current, and -25 to 75°C operating temp range. Its compact size (L22.0xB14.5xH19.5 mm) makes it ideal for EMI mains filtering applications in various electronic devices.
SSRH7H-M10108
KEMET Corporation's SSRH7H-M10108 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1A. This single-phase filter operates b/w -25°C to 120°C and is UL approved. It is designed for through-hole mounting applications requiring effective electromagnetic interference filtering.
SSB11H-R13090
KEMET Corporation's SSB11H-R13090 EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 130°C, ideal for single-phase applications. This filter has a rated current of 1.3A and dimensions of L21.0xB20.5xH16.0mm, suitable for through-hole mounting in various electronic devices.
CMS1-4-R
SINGLE PHASE EMI FILTER; Rated Current: 3.8 A; Additional Features: INDUCTANCE 18 MICRO HENRY; Minimum Operating Temperature: -40 Cel; Height: 2.6 mm; Length: 9.4 mm;
6609047-3
TE Connectivity's 6609047-3 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max current of 15A. It operates b/w -10°C to 40°C, with a max leakage current of 1.2mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
810913010112
Wurth Elektronik 810913010112 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A rated current. It operates at -25 to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
SSRH24NH-30145
KEMET Corporation's SSRH24NH-30145 is a UL-approved EMI mains filter with 250V rated voltage and 3A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and has a compact size of 25.5mm x 18mm x 25.5mm. Ideal for single-phase EMI filtering applications requiring reliable performance in various electronic devices.
6609032-9
TE Connectivity's 6609032-9 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 5A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
TF2514HU-101Y7R0-01
TDK TF2514HU-101Y7R0-01 is a 280V UL/CSA/IEC approved EMI mains filter with 7A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting applications due to its compact D25xH14mm dimensions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74482210002
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Additional Features: INDUCTANCE 0.175 MILLI HENRY; Dimensions: L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch); Height: 22 mm; Mounting Type: THROUGH HOLE MOUNT;
7448031501
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
744844221
Wurth Elektronik 744844221 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 125°C, ideal for EMI mains filtering applications. Compact at L28.0xB18.5xH33.0 (mm), it offers through-hole mounting for easy installation in various systems.
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
7448227005
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
7448031002
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
7448051012
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 33 mm; Rated Voltage: 250 V; Packing Method: CARTON; Width (mm): 23;
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
THREE PHASE EMI FILTER; Rated Current: 40 A; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Approvals (V): IEC; Packing Method: TRAY;
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
7448680120
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 27.5 mm; Rated Voltage: 250 V;
7448040707
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 28 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L28.0XB19.0XH28.0 (mm)/L1.102XB0.748XH1.102 (inch); Terminal Finish: TIN COPPER;
7448040435
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e2; Approvals (V): ENEC-10; VDE; Terminal Finish: TIN COPPER;
744841414
Wurth Elektronik's 744841414 is a single-phase EMI mains filter with a rated voltage of 250V and max operating temperature of 125°C. It has approvals from ENEC-10, IEC, VDE and dimensions of L16.0xB7.5xH17.5 (mm). Ideal for applications requiring effective EMI filtering in electronic systems with a rated current of 4A.
7448014501
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Mounting Type: THROUGH HOLE MOUNT; Length: 15 mm; Height: 16 mm; Maximum Operating Temperature: 125 Cel;
7448030417
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 13.5; Minimum Operating Temperature: -40 Cel; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz;
744834407
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Length: 32.5 mm; Terminal Finish: Tin (Sn) over Copper (Cu); Width (mm): 28.0; Rated Voltage: 250 V;
744844471
SINGLE PHASE EMI FILTER; Rated Current: 9 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -40 Cel;
7448041104
SINGLE PHASE EMI FILTER; Rated Current: 11 A; Length: 28 mm; JESD-609 Code: e2; Terminal Finish: TIN COPPER; Approvals (V): ENEC-10; VDE;
7448030333
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Maximum Operating Temperature: 125 Cel; Length: 22 mm; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved