Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN2415-6-29 is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6A current. Operating at -25 to 100°C, it offers high pot of 1100V and max leakage current of 9.4mA. Ideal for panel mounting applications with dimensions L94.0xB56.0xH45.4mm, this filter operates at 60Hz frequency for effective EMI suppression.
Median Price
$57.163
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
RS Americas
1+ parts
$48.820
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$67.130
$51.480
$50.440
RS (Exports)
$74.490
$67.040
Verical
Distrelec
Sager
$47.070
$45.080
Nova Conductors
$40.005
Electro Sonic
$56.580
$44.610
$43.280
Vyrian
Corohmni
$1.167
Aztec Data Supply Inc.
$3.149
AZTECH Wire
$5.591
Continental Prestige Electronics
$39.205
Allen Electronics Distributors
$46.940
Argo Parts USA
Netroflash
$38.005
$37.205
Perfect Parts
Having UL, CSA, and ENEC-14 approvals ensures that this EMI mains filter meets strict safety and quality standards, making it a reliable choice.
The 250V rated voltage makes this EMI mains filter suitable for a wide range of applications and ensures compatibility with standard voltage requirements.
The single-phase EMI filter design effectively reduces electromagnetic interference, providing clean power and improving the performance of connected equipment.
With a maximum operating temperature of 100°C, this EMI mains filter can handle high heat environments without compromising its performance or safety.
The minimum operating temperature of -25°C allows this EMI mains filter to function reliably in cold conditions, making it suitable for a variety of operating environments.
The compact width of 56.0mm makes this EMI mains filter suitable for installations where space is limited, allowing for easy integration into different systems.
The 60Hz operating frequency ensures compatibility with standard power systems, making this EMI mains filter suitable for a wide range of applications.
The high pot rating of 1100V indicates the strong insulation and safety measures of this EMI mains filter, ensuring reliable performance and protection against voltage surges.
With a maximum leakage current of 9.4mA, this EMI mains filter maintains low levels of electrical leakage, reducing the risk of electrical hazards and improving safety.
The panel mount design of this EMI mains filter allows for easy and secure installation on panels or enclosures, enhancing convenience and accessibility during setup.
The compact dimensions of this EMI mains filter make it versatile and space-efficient, suitable for a variety of applications and installation configurations.
With a rated current of 6A, this EMI mains filter can effectively handle moderate power loads while maintaining efficient operation and reducing electromagnetic interference.
The height of 45.4mm offers a balance between compact size and adequate space for internal components, making this EMI mains filter suitable for various equipment configurations.
EMI Mains Filters FN2415-6-29 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Hy Electronic
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Sensitron Semiconductor
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
General Instrument
Secos
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Diodes Incorporated
CMS3-1-R
Eaton Corporation
Eaton Corporation's CMS3-1-R is a UL-approved single-phase EMI filter with 4 terminals. It has a rated current of 5.7A and operates b/w -40°C to 160°C. Ideal for surface mount applications, its compact size of L11.43xB11.43xH6.0 (mm) makes it suitable for various electronic devices requiring EMI mains filtering.
PLH10AN1612R1P2
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm; Dimensions: L18XB16XH17.5 (mm);
SC-03-06G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; High Pot: 500 V; Width (mm): 14; Length: 17.5 mm;
FN3258-42-33
Schaffner Holding Ag
Schaffner Holding Ag's FN3258-42-33 EMI Mains Filter is a UL, CSA, and ENEC-14 approved three-phase filter with 480V rated voltage and 42A current. With a compact size of L280.0xB50.0xH85.0 mm, it operates b/w -25°C to 100°C making it ideal for panel mounting applications requiring high pot of 2650V and max leakage current of 33mA at 60Hz frequency.
FIL-1S-1-6A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 45; Height: 99 mm; Length: 99.5 mm; Rated Voltage: 230 V;
CMS1-12-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Additional Features: INDUCTANCE 131 MICRO HENRY; Length: 9.4 mm; Width (mm): 7.2; Manufacturer Series: CMS;
SCF25XV-310-2R3A004JV
KEMET Corporation
SINGLE PHASE EMI FILTER;
FN406B-6-02
Schaffner Holding Ag's FN406B-6-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 6A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2500V. Ideal for applications requiring through-hole mounting in various industries.
CMS3-4-R
The Eaton Corporation's CMS3-4-R EMI Mains Filter is a single-phase filter with UL approval. It features 4 terminals, rated for 3.95A current, and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L11.43xB11.43xH6.0mm and uses Tin/Silver/Copper terminal finish.
FN2010-6-06
FN2010-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.9A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.66mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
EAC-10-102-D
Cosel
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
B82731-M2501-A30
TDK
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
NAC-04-472-D
The Cosel NAC-04-472-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 4A. Operating at temperatures from -40 to 85°C, it offers high pot protection up to 2500V and DIN rail mounting. Ideal for applications requiring effective EMI filtering in compact spaces.
1-1609034-2
TE Connectivity
TE Connectivity's 1-1609034-2 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 6A. It operates b/w -10°C to 40°C, with a max leakage current of 0.75mA at 50Hz. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
SCR22-060-1R0A075JH
KEMET's SCR22-060-1R0A075JH is a UL-approved EMI mains filter with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter. Ideal for through-hole mounting applications in various industries.
3EDP
TE Connectivity's 3EDP EMI Mains Filter is UL, CSA, VDE approved with 250V rating. It features single-phase filter type, 3A rated current, and max leakage current of 0.25mA. Ideal for PCB mounting applications in electronics to reduce electromagnetic interference at operating temperatures from -10°C to 40°C.
7448030417
Wuerth Elektronik & Kg
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
SC-02-30G
KEMET Corporation's SC-02-30G EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 105°C. It is UL approved for single-phase filtering applications. With dimensions of L17.5xB14.0xH17.5 mm, it is designed for through-hole mounting with a rated current of 2A.
SCR-100-1R2A010JH
KEMET Corporation's SCR-100-1R2A010JH is a UL-approved EMI mains filter with 250V rated voltage and 10A current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this through-hole mount filter measures 27mm x 29mm x 23mm.
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2412-32-33
SINGLE PHASE EMI FILTER; Rated Current: 32 A; Height: 87 mm; Dimensions: L110.0XB93.0XH87.0 (mm)/L4.331XB3.661XH3.425 (inch); Operating Frequency (Hz): 400Hz; Approvals (V): UL; CSA; ENEC-14;
FN2410-100-34
SINGLE PHASE EMI FILTER; Rated Current: 100 A; Rated Voltage: 250 V; Height: 100 mm; Approvals (V): UL; CSA; ENEC-14; Length: 140 mm;
FN2410-32-33
SINGLE PHASE EMI FILTER; Rated Current: 32 A; Height: 76 mm; Approvals (V): UL; CSA; ENEC-14; Minimum Operating Temperature: -25 Cel; Width (mm): 93.0;
FN2415L-6-29
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Rated Voltage: 250 V; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 400; Approvals (V): IEC;EN;UL;CSA;
FN2410H-100-34
SINGLE PHASE EMI FILTER; Rated Current: 100 A; Length: 140 mm; Dimensions: L140.0XB115.0XH100.0 (mm)/L5.512XB4.528XH3.937 (inch); Width (mm): 115.0; Approvals (V): UL; CSA; ENEC-14;
FN2415-10-29
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Width (mm): 56.0; Maximum Operating Temperature: 100 Cel; Additional Features: TERMINAL BLOCK CONNECTIONS; Maximum Leakage Current: 9.4 mA;
FN2415-16-29
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Leakage Current: 9.4 mA; Approvals (V): UL; CSA; ENEC-14; High Pot: 1100 V; Length: 94 mm;
FN2415B-6-29
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 100 Cel; Width (mm): 56; High Pot: 1100 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved