Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN2010B-16-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and can handle a high pot of 2500V. This single-phase filter is panel mountable and ideal for applications requiring effective electromagnetic interference suppression.
Median Price
$18.110
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$10.600
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$17.690
$16.070
$15.080
RS Americas
$18.530
Verical
$18.939
Nova Conductors
$14.685
Bristol Electronics
$15.350
$13.508
Electro Sonic
$20.520
$17.450
$15.900
IBS Electronics
$25.682
$23.330
$21.893
Vyrian
Lantek
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Manoshevitz Elec. Sales
Corohmni
$0.755
Aztec Data Supply Inc.
$2.205
AZTECH Wire
$11.883
Continental Prestige Electronics
$14.391
Netroflash
Allen Electronics Distributors
$17.820
Argo Parts USA
GreenTree Electronics
These certifications ensure that the product meets international safety standards and regulations, making it a reliable option for use.
Suitable for use in a wide range of electrical systems without risking overload or damage.
Specifically designed to effectively reduce electromagnetic interference in single-phase systems, ensuring clean power supply.
Can withstand high temperatures, making it suitable for use in various industrial environments.
Capable of operating in low-temperature conditions, ensuring reliability in extreme environments.
Compact design allows for easy installation in limited space, making it suitable for various applications.
Compatible with standard power frequencies, ensuring optimal performance in typical electrical systems.
Low leakage current ensures energy efficiency and safety, preventing potential hazards.
Panel mounting option facilitates easy installation and integration into existing systems.
Compact dimensions make it suitable for applications where space is limited, without compromising on performance.
High rated current capacity allows for reliable operation in systems with varying load requirements.
Low height profile enables installation in tight spaces, offering flexibility in system design.
EMI Mains Filters FN2010B-16-06 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Packaging - Mult Devs - packing material chg 29/SEP/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Secos
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Telefunken
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CMS1-1-R
Eaton Corporation
Eaton Corporation's CMS1-1-R EMI Mains Filter is a UL approved single-phase filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 7A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
250APS12P
The TE Connectivity 250APS12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 390mA. Ideal for panel mounting applications, it measures 160mm in width, 208mm in length, and stands at a height of 123mm.
250APH12P
The TE Connectivity 250APH12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 330mA. Ideal for panel mounting applications, it measures 160mm in width, 250mm in length, and stands at a height of 125mm.
FN2010M-20-06
Schaffner Holding Ag
FN2010M-20-06 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 100°C. It has approvals from EN, IEC, CSA, and UL. This panel mount filter is suitable for applications requiring up to 20A of rated current and operates at an operating frequency of 400Hz.
PLY17BN1023R0A2B
Murata Manufacturing
Murata Manufacturing's PLY17BN1023R0A2B is a 300V rated SINGLE PHASE EMI FILTER with 3A current. Operating from -25 to 120 °C, it has Tin/Copper terminals and dimensions of L24.5xB22.5xH12.5 mm. Ideal for EMI mains filtering applications with through-hole mounting requirements.
JAC-10-103-D
Cosel
JAC-10-103-D by Cosel is a 3-phase EMI filter with UL and CSA approvals. It has a rated voltage of 500V, rated current of 10A, and max leakage current of 1mA. Ideal for industrial applications requiring efficient EMI mains filtering in a compact DIN rail mount design.
SU7VC-05011
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 1.1 MILLI HENRY; Maximum Operating Temperature: 348 Cel;
SSR10V-07330
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Height: 21 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 13;
SC-10-30J
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 3 MILLI HENRY; Height: 33 mm;
SSR21NV-M12345
KEMET Corporation
SSR21NV-M12345 by KEMET Corp is a single-phase EMI filter with a rated voltage of 250V. It has a min insulation resistance of 100 Mohm and can operate at temperatures ranging from -25 to 120 °C. This filter is commonly used in applications requiring EMI mains filtering, such as industrial equipment or power supplies.
SS11VL-R06270
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
SCF-03-650
KEMET Corporation's SCF-03-650 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 3A. Operating b/w -25°C to 65°C, it has dimensions of L15.0xB12.0xH15.0 mm and is designed for through-hole mounting applications at 50Hz frequency. Ideal for noise suppression in electronic equipment requiring EMI filtering.
10VK1
The TE Connectivity 10VK1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 6 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SN8D-300JB
KEMET Corporation's SN8D-300JB is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating temperature ranges from -25°C to 105°C, making it suitable for various applications requiring EMI mains filtering. With dimensions of 15.5mm x 18.5mm x 18mm, it is designed for through-hole mounting in electronic devices.
SN13-500
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 18 mm; Packing Method: TRAY; Diameter (mm): 31; Mounting Type: THROUGH HOLE MOUNT;
CMS1-11-R
Eaton Corporation's CMS1-11-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.35A. Ideal for surface mount applications due to its compact L9.4xB7.2xH2.6mm size and tape and reel packing method.
SS11VL-R07190
SS11VL-R07190 by KEMET Corporation is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.7A rated current. With a compact size of L22.0xB14.5xH19.5 (mm), it's ideal for EMI mains filtering applications in various electronic devices, offering high insulation resistance of 100 Mohm at temperatures ranging from -25 to 75 °C.
TF3435VU-300Y15R0-1H
TDK
TF3435VU-300Y15R0-1H by TDK is a 280V UL/CSA/IEC approved EMI mains filter with 15A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting, its compact D33XL22mm size makes it suitable for various electronic applications.
FN3256H-120-35-R69
Schaffner's FN3256H-120-35-R69 is a 3-phase EMI filter with 480V rated voltage, 120A current, and -25 to 100°C operating temperature range. Approved by EN, IEC, CSA, UL for applications requiring high-potential of 1300V and max leakage current of 0.9mA. Ideal for panel mounting in industrial settings with a frequency of 60Hz.
SU9V-R05034
SU9V-R05034 by KEMET Corp is an EMI mains filter with UL approval and 250V rated voltage. It offers a min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a rated current of 0.5A. Ideal for applications requiring effective filtering in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
FN2030-6-06
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
FN2030-4-06
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Height: 22.3 mm; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
FN2030-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; High Pot: 1100 V; Approvals (V): UL; CSA; ENEC-14; Maximum Leakage Current: .34 mA; Additional Features: INDUCTANCE 20 MILLIHENRY;
FN2020-16-06
SINGLE PHASE EMI FILTER; Rated Current: 18.4 A; Length: 50.5 mm; Dimensions: L50.5XB44.5XH29.3 (mm)/L1.988XB1.752XH1.154 (inch); Height: 29.3 mm; Rated Voltage: 250 V;
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
FN2020-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Maximum Leakage Current: .74 mA; Length: 43.5 mm; Operating Frequency (Hz): 50/60Hz; Additional Features: INDUCTANCE 2.5 MILLIHENRY;
FN2010-6-06
SINGLE PHASE EMI FILTER; Rated Current: 6.9 A; High Pot: 2000 V; Additional Features: INDUCTANCE 1 MILLIHENRY; Length: 43.5 mm; Maximum Leakage Current: .66 mA;
FN2030-20-06
The Schaffner FN2030-20-06 is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, and ENEC-14. With dimensions of L64.8XB49.8XH40.3 (mm), it is suitable for chassis mount applications requiring effective filtering at frequencies of 50/60Hz.
FN2010-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Length: 43.5 mm; Height: 24.3 mm;
FN2070-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Height: 40.3 mm; Additional Features: INDUCTANCE 9.8 MILLIHENRY; Maximum Operating Temperature: 100 Cel; Length: 64.8 mm;
FN2020-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Maximum Operating Temperature: 100 Cel; High Pot: 2000 V; Height: 29.3 mm; Length: 43.5 mm;
FN2020B-20-06
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Maximum Operating Temperature: 100 Cel; Width (mm): 49.8; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz;
FN2010-12-06
SINGLE PHASE EMI FILTER; Rated Current: 13.8 A; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .74 mA; Approvals (V): UL; CSA; ENEC-14; High Pot: 2000 V;
FN2020-20-08
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Additional Features: INDUCTANCE 0.6 MILLIHENRY; Height: 30.3 mm; Approvals (V): UL; CSA; ENEC-14; Mounting Type: CHASSIS MOUNT;
FN2020A-20-06
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
FN2070-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CSA; ENEC-14;
FN2080-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Width (mm): 56.0; Dimensions: L130.5XB56.0XH45.4 (mm)/L5.138XB2.205XH1.787 (inch); Additional Features: INDUCTANCE 4.5 MILLIHENRY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved