Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN2020B-20-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a high pot of 2500V, and a max leakage current of 0.002mA. This single-phase filter has dimensions of L64.8xB49.8xH30.3mm and is ideal for chassis mounting applications with a rated current of 23A at an operating frequency of 50/60Hz.
Median Price
$24.750
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$15.210
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$19.931
Chip1Stop
$20.400
Arrow
$21.390
RS Americas
$23.720
Sager
$27.750
$25.290
$23.490
Mouser Electronics
$28.910
$23.750
$22.500
DigiKey
$36.250
$25.255
Master Electronics
$36.480
$24.640
$21.950
Verical
$30.219
TTI
Nova Conductors
$19.540
Electro Sonic
$28.660
$23.610
$21.650
IBS Electronics
$52.578
$35.513
$31.636
Vyrian
Ashlea Components Ltd
Aztec Data Supply Inc.
$1.446
Corohmni
$19.014
Aranea Global
$19.149
$18.383
Continental Prestige Electronics
Advanced Electronics
Allen Electronics Distributors
$22.820
Neutron USA
$85.430
Argo Parts USA
Having multiple approvals ensures that this product meets international safety and quality standards, giving peace of mind to users.
The rated voltage of 250V makes this EMI mains filter suitable for a wide range of applications.
The single-phase filter design helps in effectively reducing electromagnetic interference in power lines, leading to improved overall system performance.
With a high maximum operating temperature of 100°C, this filter can withstand elevated temperatures without compromising its functionality.
The low minimum operating temperature of -25°C ensures that this filter can still perform effectively in cold environments.
The compact width of 49.8mm makes this filter easy to install in various systems where space is limited.
The filter's compatibility with both 50Hz and 60Hz frequencies allows it to be used in different regions without any issues.
The length of 64.8mm provides a balanced form factor, making it suitable for integration into different equipment.
The high potential (high pot) rating of 2500V ensures that the filter can withstand high voltage spikes without damage.
The low maximum leakage current of 0.002 mA indicates that this filter operates efficiently without causing unnecessary power loss.
The chassis mount design makes installation easy and secure, ensuring the filter stays in place during operation.
The compact dimensions of this filter make it versatile and suitable for a wide range of applications where space is limited.
With a high rated current of 23A, this filter can handle heavy loads without overheating or performance degradation.
The height of 30.3mm strikes a balance between compact design and adequate component spacing for efficient heat dissipation.
EMI Mains Filters FN2020B-20-06 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Packaging - Mult Devs - packing material chg 29/SEP/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Lite-on Semiconductor
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
International Semiconductor
3-103-705
Schurter Ag
Schurter Ag's 3-103-705 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 1A, and max operating temperature of 100°C. Ideal for panel mounting applications requiring effective filtering at frequencies of 50/60Hz.
7448227005
Wuerth Elektronik & Kg
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
B82722J2302N001
TDK
The TDK B82722J2302N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
RN112-4-02-0M7
Schaffner Holding Ag
RN112-4-02-0M7 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 4A rated current. It has approvals from UL, IEC, VDE, and ENEC-10. This filter operates b/w -40°C to 100°C and is suitable for applications requiring EMI mains filtering in various industries.
SC-03-05GS
KEMET Corporation
KEMET Corporation's SC-03-05GS is a UL approved EMI mains filter with 250V rated voltage and 3A current. Featuring single-phase filter type, it operates b/w -25°C to 105°C. Ideal for applications requiring high insulation resistance and compact dimensions of L15.0xB8.5xH15.0mm, such as industrial electronics.
10EMC1
10EMC1 by TE Connectivity is a UL, VDE, and CSA approved EMI mains filter with a rated voltage of 250V. It operates at temperatures ranging from -10°C to 40°C and has a max leakage current of 0.21mA. This single-phase filter has a rated current of 10A and is designed for panel mounting applications in systems requiring effective electromagnetic interference suppression.
10510
Murrelektronik
10510 by Murrelektronik is a THREE PHASE EMI FILTER with a rated voltage of 440 V and a rated current of 3 A. It has a compact design, measuring 39 mm in width, 65 mm in length, and 107 mm in height. This filter is suitable for DIN RAIL MOUNT installation and is approved for use according to EN standards.
FN2020-3-06
Schaffner Holding Ag's FN2020-3-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and a max leakage current of 0.74mA. This single-phase filter is ideal for chassis mounting applications due to its compact dimensions of L43.5xB32.5xH29.3mm.
ESP-03-221
Cosel
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
RSEL-2002WL
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 50 mm; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel;
SU9VF-02100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SSHB21H-R30050
KEMET Corporation's SSHB21H-R30050 is a UL approved EMI mains filter with 250V rated voltage and 3A current. Featuring single-phase filter type, it operates b/w -25°C to 130°C temperatures. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
SSRH7HS-M04467
SSRH7HS-M04467 by KEMET is a UL-approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures from -25°C to 120°C, rated for 250V and 0.4A. This single-phase filter, measuring 14.5mm x 18mm x 12mm, is designed for through-hole mounting applications.
B82722J2301N001
The TDK B82722J2301N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
10VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 10 A; Length: 84.8 mm; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 40 dB;
CMS1-5-R
Eaton Corporation
Eaton Corporation's CMS1-5-R EMI Mains Filter is a single-phase filter with 4 terminals, UL approval, and rated current of 3.6A. With dimensions of L9.4xB7.2xH2.6 mm, it operates b/w -40°C to 160°C and is ideal for surface mount applications in electronic devices.
PLA10AN4330R3R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN4330R3R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, suitable for EMI mains filtering applications. Dimensions: L18.0xB16.0xH17.5 mm, mounting type: THROUGH HOLE MOUNT, and terminal finish: Tin/Copper (Sn/Cu).
B84112B0000B110
TDK's B84112B0000B110 EMI Mains Filter is UL, CSA, and ENEC-10 approved with a 250V rated voltage. It offers single-phase filtering, 10A rated current, and 2700V high pot for effective noise suppression in electronic equipment. Ideal for panel mounting applications due to its compact dimensions of L63.5xB50.8xH38.1mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
FN2030-6-06
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
FN2030-4-06
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Height: 22.3 mm; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
FN2030-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; High Pot: 1100 V; Approvals (V): UL; CSA; ENEC-14; Maximum Leakage Current: .34 mA; Additional Features: INDUCTANCE 20 MILLIHENRY;
FN2020-16-06
SINGLE PHASE EMI FILTER; Rated Current: 18.4 A; Length: 50.5 mm; Dimensions: L50.5XB44.5XH29.3 (mm)/L1.988XB1.752XH1.154 (inch); Height: 29.3 mm; Rated Voltage: 250 V;
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Maximum Leakage Current: .74 mA; Length: 43.5 mm; Operating Frequency (Hz): 50/60Hz; Additional Features: INDUCTANCE 2.5 MILLIHENRY;
FN2010-6-06
SINGLE PHASE EMI FILTER; Rated Current: 6.9 A; High Pot: 2000 V; Additional Features: INDUCTANCE 1 MILLIHENRY; Length: 43.5 mm; Maximum Leakage Current: .66 mA;
FN2030-20-06
The Schaffner FN2030-20-06 is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, and ENEC-14. With dimensions of L64.8XB49.8XH40.3 (mm), it is suitable for chassis mount applications requiring effective filtering at frequencies of 50/60Hz.
FN2010-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Length: 43.5 mm; Height: 24.3 mm;
FN2070-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Height: 40.3 mm; Additional Features: INDUCTANCE 9.8 MILLIHENRY; Maximum Operating Temperature: 100 Cel; Length: 64.8 mm;
FN2020-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Maximum Operating Temperature: 100 Cel; High Pot: 2000 V; Height: 29.3 mm; Length: 43.5 mm;
FN2010-12-06
SINGLE PHASE EMI FILTER; Rated Current: 13.8 A; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .74 mA; Approvals (V): UL; CSA; ENEC-14; High Pot: 2000 V;
FN2020-20-08
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Additional Features: INDUCTANCE 0.6 MILLIHENRY; Height: 30.3 mm; Approvals (V): UL; CSA; ENEC-14; Mounting Type: CHASSIS MOUNT;
FN2020A-20-06
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
FN2070-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CSA; ENEC-14;
FN2080-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Width (mm): 56.0; Dimensions: L130.5XB56.0XH45.4 (mm)/L5.138XB2.205XH1.787 (inch); Additional Features: INDUCTANCE 4.5 MILLIHENRY;
FN2020B-20-08
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Approvals (V): UL; CSA; ENEC-14; Operating Frequency (Hz): 50/60Hz; Additional Features: MEDICAL VERSION; INDUCTANCE 0.6 MILLIHENRY; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved