Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FN2030-1-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 1.1A, and operates at temperatures ranging from -25°C to 100°C. Ideal for chassis mount applications requiring effective electromagnetic interference mains filtering.
Median Price
$18.730
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$14.700
100+ parts
$10.290
1k+ parts
-
10k+ parts
Sager
$15.130
$12.490
$12.190
Mouser Electronics
$14.660
$13.230
DigiKey
$21.170
$15.076
Element14
$22.710
$20.580
$18.480
Newark
$24.080
$18.750
TE Connectivity
$48.590
$41.300
Distrelec
Master Electronics
$14.510
$14.410
Verical
$17.889
Nova Conductors
$12.210
Powertech Controls
$17.480
Schukat
$18.252
$13.578
Electro Sonic
$18.650
$15.590
$14.090
TME
$21.180
Vyrian
Aztec Data Supply Inc.
$2.470
Continental Prestige Electronics
$11.966
Netroflash
$11.600
$11.355
Corohmni
$12.453
Argo Parts USA
These approvals ensure that the product meets the required safety standards and regulations, making it a reliable choice for EMI filtering.
The high rated voltage capability allows for compatibility with a wide range of electrical systems, making it versatile for different applications.
The single phase EMI filter design effectively reduces electromagnetic interference, ensuring clean power for sensitive equipment.
With a high maximum operating temperature, this product can withstand harsh environmental conditions without compromising performance.
The low minimum operating temperature allows for reliable operation even in extreme cold conditions, making it suitable for various environments.
The compact width makes this filter easy to integrate into existing setups, saving space and ensuring easy installation.
The compatibility with standard operating frequencies ensures that this filter can be used with most common electrical systems.
The moderate length of the filter allows for easy placement in different configurations, offering flexibility in installation.
The high potential voltage rating ensures reliable insulation and protection against electrical surges, enhancing the durability of the product.
The low maximum leakage current indicates excellent performance in preventing unwanted electrical current flow, ensuring the safety of connected devices.
The chassis mounting option allows for secure and stable attachment, reducing the risk of the filter coming loose during operation.
The compact dimensions make this filter suitable for a wide range of applications where space is limited, offering versatility in installation.
The high-rated current capacity makes this filter suitable for powering a variety of devices without the risk of overload, ensuring stable operation.
The moderate height of the filter allows for easy integration into different setups, offering flexibility in installation options.
EMI Mains Filters FN2030-1-06 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
PCN Packaging - Mult Devs - packing material chg 29/SEP/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
6VV1
TE Connectivity's 6VV1 EMI Mains Filter offers UL, CSA, VDE approvals. It features insertion loss of 15 dB at min frequency and 55 dB at max frequency. With a rated voltage of 250V, it is ideal for single-phase applications with operating freq of 50/60Hz.
FN406B-1-02
Schaffner Holding Ag
Schaffner Holding Ag's FN406B-1-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and a high pot of 2500V. This single-phase filter is ideal for applications requiring through-hole mounting and rated current up to 1A.
16BCF10R
TE Connectivity's 16BCF10R EMI Mains Filter is a single-phase filter with UL, CSA, EN approvals and rated voltage of 277V. With a max operating temperature of 40°C and rated current of 16A, it is ideal for panel mount applications to reduce electromagnetic interference in electrical systems at frequencies of 50/60Hz.
810913010112
Wuerth Elektronik & Kg
Wurth Elektronik 810913010112 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A rated current. It operates at -25 to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
5VK1
TE Connectivity's 5VK1 EMI Mains Filter offers UL, CSA, VDE approvals and a rated voltage of 250V. With insertion loss ranging from 6dB to 50dB, it operates at temperatures from -10°C to 40°C. This single-phase filter is ideal for panel mounting applications with dimensions of L78.7xB71.4xH29.5mm.
SS11VL-R06270
KEMET Corporation
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
10VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 10 A; Length: 84.8 mm; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 40 dB;
10VW1
The TE Connectivity 10VW1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 18 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SCF19XV-150-1R3A006JH
SINGLE PHASE EMI FILTER;
B84112B0000B110
TDK
TDK's B84112B0000B110 EMI Mains Filter is UL, CSA, and ENEC-10 approved with a 250V rated voltage. It offers single-phase filtering, 10A rated current, and 2700V high pot for effective noise suppression in electronic equipment. Ideal for panel mounting applications due to its compact dimensions of L63.5xB50.8xH38.1mm.
B82722-A2302-N1
TDK's B82722-A2302-N1 is a 250V rated SINGLE PHASE EMI FILTER with 3A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. This through-hole mount filter, measuring 22.7mm x 22.3mm x 13.3mm (LxWxH), is ideal for EMI mains filtering applications.
SS11V-06180-CH
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 75 Cel; Dimensions: L22.0XB14.5XH21.5 (mm)/L0.866XB0.571XH0.846 (inch);
SCR25XV-170-1R7A009JV
KEMET's SCR25XV-170-1R7A009JV is a SINGLE PHASE EMI FILTER with 1000V rated voltage, 17A current, and -40 to 120°C operating temperature range. Ideal for EMI mains filtering applications due to its high insulation resistance of 100 Mohm.
7448031501
Wurth Elektronik 7448031501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 15A current. It operates b/w -40 to 125 °C, suitable for ENEC-10; VDE approved applications requiring EMI mains filtering at 50Hz frequency.
6MV1
TE Connectivity's 6MV1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 19 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
RSEL-2003WL
The TDK RSEL-2003WL is a single-phase EMI filter with 250V rated voltage and 3A rated current. It offers high insulation resistance of 100 Mohm, approvals from CSA, ENEC-14, and UL. Ideal for panel mounting applications in environments ranging from -25°C to 85°C.
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
SCF20-05-550
KEMET Corporation's SCF20-05-550 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 5A. Operating b/w -25°C to 70°C, it has dimensions of L25.0xB15.5xH25.0 mm and is designed for through-hole mounting applications at 50Hz frequency. Ideal for noise suppression in electronic equipment requiring EMI filtering in compact spaces.
7448640404
Wurth Elektronik 7448640404 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.45A rated current. Operating from -40 to 125 °C, it's ideal for EMI mains filtering in applications requiring through hole mounting at 50Hz frequency.
10VK1
The TE Connectivity 10VK1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 6 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
FN2030-6-06
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
FN2030-4-06
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Height: 22.3 mm; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
FN2020-16-06
SINGLE PHASE EMI FILTER; Rated Current: 18.4 A; Length: 50.5 mm; Dimensions: L50.5XB44.5XH29.3 (mm)/L1.988XB1.752XH1.154 (inch); Height: 29.3 mm; Rated Voltage: 250 V;
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
FN2020-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Maximum Leakage Current: .74 mA; Length: 43.5 mm; Operating Frequency (Hz): 50/60Hz; Additional Features: INDUCTANCE 2.5 MILLIHENRY;
FN2010-6-06
SINGLE PHASE EMI FILTER; Rated Current: 6.9 A; High Pot: 2000 V; Additional Features: INDUCTANCE 1 MILLIHENRY; Length: 43.5 mm; Maximum Leakage Current: .66 mA;
FN2030-20-06
The Schaffner FN2030-20-06 is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, and ENEC-14. With dimensions of L64.8XB49.8XH40.3 (mm), it is suitable for chassis mount applications requiring effective filtering at frequencies of 50/60Hz.
FN2010-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Length: 43.5 mm; Height: 24.3 mm;
FN2070-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Height: 40.3 mm; Additional Features: INDUCTANCE 9.8 MILLIHENRY; Maximum Operating Temperature: 100 Cel; Length: 64.8 mm;
FN2020-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Maximum Operating Temperature: 100 Cel; High Pot: 2000 V; Height: 29.3 mm; Length: 43.5 mm;
FN2020B-20-06
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Maximum Operating Temperature: 100 Cel; Width (mm): 49.8; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz;
FN2010-12-06
SINGLE PHASE EMI FILTER; Rated Current: 13.8 A; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .74 mA; Approvals (V): UL; CSA; ENEC-14; High Pot: 2000 V;
FN2020-20-08
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Additional Features: INDUCTANCE 0.6 MILLIHENRY; Height: 30.3 mm; Approvals (V): UL; CSA; ENEC-14; Mounting Type: CHASSIS MOUNT;
FN2020A-20-06
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
FN2070-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CSA; ENEC-14;
FN2080-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Width (mm): 56.0; Dimensions: L130.5XB56.0XH45.4 (mm)/L5.138XB2.205XH1.787 (inch); Additional Features: INDUCTANCE 4.5 MILLIHENRY;
FN2030-1-6
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -25 Cel; Width (mm): 32.5; Height: 24.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved