Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Manufacturer Series: CMS; Minimum Operating Temperature: -40 Cel;
Median Price
$4.226
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$4.097
100+ parts
$2.958
1k+ parts
$2.779
10k+ parts
$2.589
Mouser Electronics
$5.210
$3.630
-
DigiKey
$3.525
$3.478
Newark
$5.590
TTI
$3.590
TTI Europe
$2.694
$2.491
Master Electronics
$3.470
$3.190
Verical
$4.354
$4.109
TME
$3.090
$2.530
$2.370
Bristol Electronics
$3.812
$1.792
$1.639
NAC Semi
$2.020
$1.860
ACDS - Activité Composants Distribution Service
Dan-Mar Components
IBS Electronics
$4.334
$4.123
Lantek
Electro Sonic
$3.730
$3.370
$3.040
Nova Conductors
Prism Electronics
Ampacity Inc.
$0.980
Advanced Electronics
$2.434
Corohmni
$2.741
Argo Parts USA
Perfect Parts
Authorized Procurement Solutions
ChipstoGo Electronic ltd
Aranea Global
Continental Prestige Electronics
GreenTree Electronics
EMI Mains Filters CMS3-4-R attributes and parameters. Explore more EMI Mains Filters devices from Cooper Electronic Technologies
Additional Features:
Approvals (V):
Filter Type:
Height:
Length:
Manufacturer Series:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Width (mm):
PCN Assembly/Origin - Multiple Devices 31/Aug/2013
PCN Packaging - Shipping Box and Labels 05/Jan/2018
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Weitron Technology
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Semitron
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Devices
Continental Device India
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM358N
Motorola
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
B82722A2102N001
TDK
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
CMS3-4-R
Cooper Electronic Technologies
16BCF6R
TE Connectivity
TE Connectivity's 16BCF6R is a 480V, 16A THREE PHASE EMI Filter with max leakage current of 6.9mA. Ideal for panel mounting, it operates b/w -10°C to 40°C at 50Hz, providing effective EMI suppression in industrial applications.
NAH-20-472
Cosel
NAH-20-472 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and dimensions of L92.0XB53.0XH41.0 (mm), it is suitable for chassis mount applications requiring up to 20A current capacity.
CMS2-2-R
Eaton Corporation
Eaton Corporation's CMS2-2-R EMI Mains Filter is UL approved with 4 terminals, rated at 4.4A. It operates b/w -40°C to 160°C, ideal for single-phase applications requiring surface mount installation in compact spaces. Dimensions: L8.89xB8.89xH6.0 mm, it features tin terminal finish and comes in tape and reel packaging.
7448040707
Wuerth Elektronik & Kg
Wurth Elektronik 7448040707 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 7A rated current. With dimensions of L28.0XB19.0XH28.0 (mm), it is ideal for EMI mains filtering applications in electronics, ensuring efficient operation at temperatures ranging from -40 to 125 °C.
FMW-65-0003
Schurter Ag
Schurter Ag's FMW-65-0003 is a UL, IEC, VDE, ENEC-10 approved 440V three-phase EMI filter with 10A rated current. With a high pot of 3000V and max leakage current of 0.5mA, it operates b/w -25°C to 100°C. Ideal for panel mount applications due to its compact dimensions of L66.0xB51.0xH43.0mm.
5VR1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 5 A; Length: 85.1 mm; Insertion Loss At Minimum Frequency: 5 dB; Dimensions: L85.1XB52.6XH29.5 (mm)/L3.35XB2.07XH1.16 (inch);
SS11VL-R22020
KEMET Corporation
SS11VL-R22020 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage, 2.2A current, and -25 to 75°C operating temp range. Its compact size (L22.0xB14.5xH19.5 mm) makes it ideal for EMI mains filtering applications in various electronic devices.
3VSK1
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Height: 29.5 mm; Minimum Frequency: .01 MHz;
10VV1
10VV1 by TE Connectivity is a single-phase EMI filter with a rated voltage of 250V. It offers insertion loss of 15dB at min frequency and 55dB at max frequency. This panel mount filter is suitable for applications requiring UL, CSA, and VDE approvals.
CMS1-14-R
SINGLE PHASE EMI FILTER; Rated Current: .85 A; Additional Features: INDUCTANCE 205 MICRO HENRY; Approvals (V): UL; Height: 2.6 mm; Maximum Operating Temperature: 160 Cel;
FN3256H-120-35
Schaffner Holding Ag
FN3256H-120-35 by Schaffner Holding Ag is a THREE PHASE EMI FILTER with a rated voltage of 480 V. It has a max operating temperature of 100°C and a high pot of 3000 V. This panel mount filter is suitable for applications requiring EMI mains filtering.
FN2415L-6-29
FN2415L-6-29 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6A rated current. It operates at temperatures from -25°C to 100°C, with approvals from IEC, EN, UL, and CSA. Ideal for EMI mains filtering applications due to its high pot of 1100V and max leakage current of 2.59mA.
SS20H-R10100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 22 mm; High Pot: 2400 V; Mounting Type: THROUGH HOLE MOUNT;
SC-03-10G
KEMET Corporation's SC-03-10G EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 3A. It is UL approved and operates b/w -25°C to 105°C. Ideal for single-phase EMI filtering applications with through-hole mounting, dimensions L17.5xB14.0xH17.5mm.
SCR-050-0R9A070JH
KEMET Corporation's SCR-050-0R9A070JH is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 50°C, and has dimensions of L29.0xB23.0xH27.0 mm. Ideal for EMI mains filtering applications with through hole mounting requirements.
FN2020-20-06
Schaffner Holding Ag's FN2020-20-06 EMI Mains Filter, rated 250V, UL/CSA/ENEC-14 approved. Single-phase filter with 23A current rating, operating at -25 to 100°C. Chassis mountable, compact size of L64.8xB49.8xH30.3mm suitable for various applications requiring effective EMI filtering.
RSEL-2005M
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 30 mm; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
B84142B0012R000
TDK's B84142B0012R000 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 12A rated current. It offers high pot of 2700V and max leakage current of 3.5mA. Ideal for panel mount applications, measuring L121.0xB113.0xH61.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CMS3-1-R
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Packing Method: TAPE AND REEL; Approvals (V): UL; Dimensions: L11.43XB11.43XH6 (mm); Minimum Operating Temperature: -40 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; JESD-609 Code: e1; Approvals (V): UL; Dimensions: L11.43XB11.43XH6.0 (mm)/L0.45XB0.45XH0.236 (inch); Mounting Type: SURFACE MOUNT;
CMS3-9-R
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Manufacturer Series: CMS; Mounting Type: SURFACE MOUNT; Dimensions: L11.43XB11.43XH6 (mm); Minimum Operating Temperature: -40 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Length: 11.43 mm; Height: 6 mm; Width (mm): 11.43; No. of Terminals: 4;
CMS3-14-R
SINGLE PHASE EMI FILTER; Rated Current: .75 A; Length: 11.43 mm; Height: 6 mm; Additional Features: INDUCTANCE 1310 MICRO HENRY; Manufacturer Series: CMS;
SINGLE PHASE EMI FILTER; Rated Current: .75 A; Dimensions: L11.43XB11.43XH6.0 (mm)/L0.45XB0.45XH0.236 (inch); Terminal Finish: Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5); JESD-609 Code: e1; Height: 6 mm;
CMS3-2-R
SINGLE PHASE EMI FILTER; Rated Current: 5.1 A; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Width (mm): 11.43; Approvals (V): UL;
SINGLE PHASE EMI FILTER; Rated Current: 5.1 A; Mounting Type: SURFACE MOUNT; Dimensions: L11.43XB11.43XH6.0 (mm)/L0.45XB0.45XH0.236 (inch); Maximum Operating Temperature: 160 Cel; Width (mm): 11.43;
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Length: 11.43 mm; Width (mm): 11.43; No. of Terminals: 4; Dimensions: L11.43XB11.43XH6.0 (mm)/L0.45XB0.45XH0.236 (inch);
CMS3-10-R
SINGLE PHASE EMI FILTER; Rated Current: 1.45 A; Dimensions: L11.43XB11.43XH6.0 (mm)/L0.45XB0.45XH0.236 (inch); Length: 11.43 mm; Packing Method: TAPE AND REEL; Approvals (V): UL;
CMS3-6-R
SINGLE PHASE EMI FILTER; Rated Current: 2.85 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 160 Cel; Width (mm): 11.43; No. of Terminals: 4;
CMS3-7-R
SINGLE PHASE EMI FILTER; Rated Current: 2.45 A; Packing Method: TAPE AND REEL; Height: 6 mm; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e1;
CMS3-1
Cooper Industries
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Mounting Type: SURFACE MOUNT; Width (mm): 11.43; Dimensions: L11.43XB11.43XH6 (mm); Length: 11.43 mm;
CMS3-2
SINGLE PHASE EMI FILTER; Rated Current: 5.1 A; Manufacturer Series: CMS; Minimum Operating Temperature: -40 Cel; Dimensions: L11.43XB11.43XH6 (mm); Height: 6 mm;
CMS3-3
SINGLE PHASE EMI FILTER; Rated Current: 4.75 A; Packing Method: TAPE AND REEL; Approvals (V): UL; Length: 11.43 mm; Additional Features: INDUCTANCE 64 MICRO HENRY;
CMS3-4
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Width (mm): 11.43; Manufacturer Series: CMS; Length: 11.43 mm; Maximum Operating Temperature: 160 Cel;
CMS3-11-R
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Height: 6 mm; Dimensions: L11.43XB11.43XH6 (mm); Additional Features: INDUCTANCE 648 MICRO HENRY; Width (mm): 11.43;
CMS3-13-R
SINGLE PHASE EMI FILTER; Rated Current: .88 A; Additional Features: INDUCTANCE 1030 MICRO HENRY; Length: 11.43 mm; Dimensions: L11.43XB11.43XH6 (mm); Packing Method: TAPE AND REEL;
SINGLE PHASE EMI FILTER; Rated Current: 2.85 A; Length: 11.43 mm; Manufacturer Series: CMS; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT;
CMS3-8-R
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 11.43; Mounting Type: SURFACE MOUNT; Length: 11.43 mm; Additional Features: INDUCTANCE 350 MICRO HENRY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved