Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET Corporation's SC-05-50J EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 105°C, suitable for single-phase applications with a rated current of 4A. Dimensions are L34.0xB23.0xH33.0mm, mounting type is through hole mount in tray packing method.
Median Price
$5.580
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$3.999
1k+ parts
$3.104
10k+ parts
$3.063
Mouser Electronics
$5.650
$4.320
$3.670
-
Verical
$4.113
TME
$5.150
$4.110
$3.620
$3.440
ACDS - Activité Composants Distribution Service
Nova Conductors
Corohmni
$2.993
Ampacity Inc.
$4.450
CoreStaff
$7.008
$2.651
Continental Prestige Electronics
Argo Parts USA
Netroflash
Perfect Parts
High insulation resistance ensures safe and reliable operation, reducing the risk of electrical failures and malfunctions.
UL approval signifies that the product meets strict safety and quality standards, giving assurance of its performance and reliability.
Suitable for a wide range of applications requiring a voltage rating of up to 250V, making it versatile and compatible for various setups.
Specifically designed as a single-phase EMI filter, this product effectively reduces electromagnetic interference, ensuring better performance of connected electronic devices.
With a high maximum operating temperature, this filter can withstand elevated temperatures without compromising its functionality, suitable for demanding environments.
Capable of operating in low temperatures as well, making it suitable for a wide range of environmental conditions and applications.
Compact width allows for easy installation and integration into various systems, saving space and ensuring a neat setup.
Optimal length for accommodating the necessary components and providing effective filtration, contributing to the overall performance of the filter.
Secure packing in trays ensures safe transit and storage, protecting the product from any damage or mishandling.
Through-hole mounting offers a secure and stable attachment method, ensuring the filter stays in place even under vibrations or movements.
Compact dimensions make it easy to integrate into different setups and systems, offering flexibility and versatility in installation.
Suitable for applications requiring a rated current of up to 4A, providing adequate power handling capabilities for connected devices or equipment.
Optimal height for accommodating internal components and ensuring proper functionality, contributing to the overall performance of the filter.
EMI Mains Filters SC-05-50J attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1552200253
Molex
WIRE AND CABLE;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
EU2B-YS3103F
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Itt Semiconductor
SSHB21HS-10145
KEMET Corporation
KEMET SSHB21HS-10145 is a UL approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 130°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions (23mm W x 26mm L x 15.5mm H) and through-hole mounting design.
FN2030-4-06
Schaffner Holding Ag
FN2030-4-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L50.5xB44.5xH22.3 mm, it operates at temperatures ranging from -25 to 100 °C and can handle high pot up to 1100V.
B84111F0000B030
TDK
TDK's B84111F0000B030 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 3A rated current. It offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications due to compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency.
744834407
Wuerth Elektronik & Kg
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
B82793C0105N265
TDK's B82793C0105N265 is a SINGLE PHASE EMI FILTER with 42V rated voltage, -40 to 125 °C operating temp range, and 750V high pot. Ideal for EMI mains filtering applications, it has dimensions of L7.1xB6.0xH4.9 mm and operates at 50/60Hz frequency.
FN3288HV-80-34-C36-R65
Schaffner's FN3288HV-80-34-C36-R65 is a 3-phase EMI filter with 305V rated voltage, 34A current, and 2650V high pot. It operates b/w -40°C to 100°C, has approvals from IEC and UL, and offers max leakage current of 12.4mA. Ideal for panel mounting applications requiring efficient mains filtering at a frequency of 60Hz.
SC-03-05GS
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 8.5; Length: 15 mm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V;
SSHB21HS-12110
KEMET Corporation's SSHB21HS-12110 EMI Mains Filter has a rated voltage of 250V, rated current of 1.2A, and high pot of 500V. It operates b/w -25°C to 130°C and is UL approved for applications requiring single-phase EMI filtering in various electronic devices.
7448051012
Wurth Elektronik 7448051012 is a single-phase EMI filter with 250V rated voltage and 10A current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125°C, and dimensions of 23mm width, 34mm length, and 33mm height. Ideal for applications requiring EMI mains filtering in electronics.
RSEN-2010D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 35 mm; Maximum Leakage Current: 1 mA; Approvals (V): UL; CSA; EN; Maximum Operating Temperature: 85 Cel;
FN2410H-100-34
The Schaffner Holding Ag FN2410H-100-34 is a single-phase EMI mains filter with 520V rated voltage and 100A rated current. It has approvals from UL, CSA, and ENEC-14, suitable for applications requiring high pot of 2250V and max leakage current of 3.4mA. With DIN rail mounting and compact dimensions of L140.0xB115.0xH100.0 mm, it operates b/w -25°C to 100°C at an operating frequency of 250Hz.
RTEN-5030D
TDK's RTEN-5030D is a 3-phase EMI filter with 30A rated current and 500V voltage. It offers approvals from UL and EN, operates b/w -25°C to 85°C, and has a high pot of 2500V. Ideal for panel mounting applications requiring effective mains filtering in industrial settings.
6609069-6
TE Connectivity
TE Connectivity's 6609069-6 is a SINGLE PHASE EMI FILTER with 250V, 50A rating. Operating from -10°C to 40°C, it has max leakage current of 7mA. Ideal for PANEL MOUNT applications in EMI mains filtering.
RN202-0.6-02-4M4
Schaffner Holding Ag's RN202-0.6-02-4M4 is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.6A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L18.2xB8.8xH13.5 mm for through-hole mounting in various electronic devices.
SU9V-02080
SU9V-02080 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage. It offers 100 Mohm min insulation resistance, 0.2A rated current, and operates b/w -25°C to 120°C. Ideal for single-phase EMI filtering applications due to its compact dimensions of L17.0xB11.0xH17.0 mm.
1609989-3
TE Connectivity's 1609989-3 is a UL and VDE approved THREE PHASE EMI FILTER with 277V rated voltage, 30A current rating, and 50/60Hz operating frequency. Ideal for PANEL MOUNT applications due to its compact dimensions of L240.0xB50.0xH85.0 (mm).
SSRH7H-M11081
KEMET Corporation's SSRH7H-M11081 is a UL-approved EMI mains filter with 250V rated voltage and 1.1A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperatures. Ideal for applications requiring high insulation resistance and effective noise suppression in compact spaces.
SHBC20-1R7A0152V
KEMET SHBC20-1R7A0152V is a SINGLE PHASE FILTER with 12A rated current, operating from -40 to 125°C. With a diameter of 41.2mm and height of 41.2mm, it's ideal for EMI suppression in various electronic applications requiring through-hole mounting.
744839010400
Wurth Elektronik 744839010400 is a 750V rated THREE PHASE EMI FILTER with 40A current. It operates b/w -40°C to 125°C, suitable for IEC approvals in applications requiring EMI mains filtering. Measuring 70mm in diameter and 39mm in height, it mounts through hole for use at 50Hz frequency.
10EK3
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; Height: 29.5 mm; Manufacturer Series: K; Dimensions: L71.4XB52.6XH29.5 (mm)/L2.81XB2.07XH1.16 (inch);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SC-05-10J
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Width (mm): 20.0; Packing Method: TRAY;
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 20.0; No. of Terminals: 4; Height: 27 mm; Rated Voltage: 250 V;
SC-05-50J
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Operating Frequency (Hz): 50Hz; Additional Features: INDUCTANCE 5 MILLI HENRY; Maximum Operating Temperature: 60 Cel; Minimum Insulation Resistance: 100 Mohm;
SC-05-20J
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Minimum Operating Temperature: -25 Cel; Approvals (V): UL; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY;
SC-05-30J
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 33 mm; Approvals (V): UL; Length: 34 mm; Dimensions: L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch);
SC-05-80J
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Dimensions: L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch); Length: 34 mm; Maximum Operating Temperature: 105 Cel; Height: 33 mm;
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch); Maximum Operating Temperature: 80 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Rated Voltage: 250 V; Width (mm): 23.0; Additional Features: INDUCTANCE 3 MILLI HENRY; No. of Terminals: 4;
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Length: 34 mm; Additional Features: INDUCTANCE 8 MILLI HENRY; Minimum Operating Temperature: -25 Cel; No. of Terminals: 4;
SC-05-100J
KEMET Corporation's SC-05-100J is a UL-approved EMI mains filter with 100 Mohm insulation resistance, 250V rated voltage, and 5A current. This single-phase filter operates b/w -25°C to 120°C and has a high pot of 500V. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression in compact spaces.
SC-05-21J
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel; High Pot: 500 V; Width (mm): 23;
SC-05-D0065
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Width (mm): 13.5; Additional Features: INDUCTANCE 6.5 MICROHENRY;
SC-05-D150H
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Packing Method: TRAY; Height: 25 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT;
SC-05-E100JKH
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Maximum Operating Temperature: 120 Cel; Packing Method: TRAY; Length: 34 mm; Height: 25 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved