Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RP135-20-10-QD by Astrodyne Tdi is a 250V single-phase EMI filter with CSA, EN, and UL approvals. It operates at -25 to 100°C, has a rated current of 10A, and offers high pot protection up to 2700V. Ideal for chassis mounting applications requiring effective filtering in the 50-60Hz frequency range.
Median Price
$31.095
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
$30.220
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$31.970
$23.840
$22.550
Vyrian
Nova Conductors
DigiKey Marketplace
Aztec Data Supply Inc.
$1.940
AZTECH Wire
$10.197
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Having approvals from well-known organizations like CSA, EN, and UL ensures that this product meets industry standards for safety and performance.
The high rated voltage of 250V makes this EMI mains filter suitable for a wide range of applications without compromising on performance.
The single-phase EMI filter design helps in reducing electromagnetic interference effectively, ensuring stable performance of connected devices.
With a high maximum operating temperature of 100 °C, this EMI filter can be used in demanding environments without overheating or malfunctioning.
The low minimum operating temperature of -25 °C allows this filter to function reliably even in cold conditions, making it versatile for various environments.
The compact width of 44mm makes this filter easy to install and saves space in the system, ideal for applications with limited space availability.
The wide operating frequency range of 50-60Hz ensures compatibility with various power systems and helps in providing effective noise suppression across different frequencies.
The low maximum leakage current of 1.8 mA indicates high safety standards, preventing electrical hazards and ensuring smooth operation of equipment.
The chassis mounting type allows for secure installation of the EMI mains filter, providing stability and ease of assembly in different applications.
With a high rated current of 10A, this EMI filter can handle heavy electrical loads without overheating or performance degradation, ensuring reliable operation.
The low height of 17mm makes this filter suitable for installations where space is limited vertically, offering flexibility in integration within tight spaces.
EMI Mains Filters RP135-20-10-QD attributes and parameters. Explore more EMI Mains Filters devices from Astrodyne Tdi
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Manufacturer Series:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
Astrodyne TDI develops power technologies and products that people depend upon, to enhance, protect, and save lives. Our ultimate goal is to maintain our position as a world-renowned leader in the development of power conversion solutions that safeguard and enrich the lives of people everywhere. We strive to be the go-to partner and employer of choice, recognized for our exceptional growth and business achievements. At Astrodyne TDI, we strive to not only meet but surpass our customers' expectations. With a focus on quality, exceptional customer service, employee development, and innovation, we are dedicated to maintaining the effectiveness of our Quality Management System and embracing a mindset of continual improvement.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
FIL-1S-1-3A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Height: 99 mm; Length: 99.5 mm;
RTEN-5010D
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): UL; EN; Length: 127 mm; Operating Frequency (Hz): 60Hz; Maximum Operating Temperature: 85 Cel;
SSRH24NVS-40059
KEMET Corporation
KEMET Corporation's SSRH24NVS-40059 is a UL approved EMI mains filter with 250V rated voltage and 4A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 20mm x 25.5mm x 31mm. Ideal for single-phase EMI filtering applications with through-hole mounting.
PLA10AN3630R3D2B
Murata Manufacturing
Murata Manufacturing's PLA10AN3630R3D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.3A rated current. It operates b/w -25°C to 120°C, offering high insulation resistance of 100 Mohm. Ideal for EMI mains filtering applications due to its compact dimensions of L18.0xB16.0xH17.5 mm and through-hole mounting design.
FN410-1-02
Schaffner Holding Ag
FN410-1-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 5 terminals and rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.373mA, and can handle a rated current of 1.2A. This through-hole mount filter is ideal for applications requiring effective EMI filtering in compact spaces.
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
FN2030-6-06
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
400APS12L
TE Connectivity
TE Connectivity's 400APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and max operating temperature of 50°C. With a rated current of 400A, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
SC22-05-30J
KEMET Corporation's SC22-05-30J EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 5A. It is a single-phase filter with UL approval, operating b/w -25°C to 120°C. Ideal for applications requiring effective electromagnetic interference filtering in compact spaces.
ESP-03-222-D
Cosel
The Cosel ESP-03-222-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI mains filter with 250V rated voltage and 3A rated current. It operates b/w -40°C to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
3-103-708
Schurter Ag
Schurter Ag's 3-103-708 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. With 10A rated current, it operates at -40 to 100°C and has max leakage current of 0.5mA. Ideal for panel mounting in applications requiring effective EMI filtering at 50/60Hz frequency.
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SN5-5501
KEMET Corporation's SN5-5501 is a SINGLE PHASE EMI FILTER with 1A rated current, operating from -25°C to 105°C. With a diameter of 13mm and height of 7mm, it is designed for THROUGH HOLE MOUNT applications in EMI mains filtering.
FN2090-10-06
FN2090-10-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 11.2A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. Ideal for panel mounting applications with dimensions of L94.0xB56.0xH45.4mm.
10EK3
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; Height: 29.5 mm; Manufacturer Series: K; Dimensions: L71.4XB52.6XH29.5 (mm)/L2.81XB2.07XH1.16 (inch);
6EDP
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 6 A; Length: 36.6 mm; Insertion Loss At Minimum Frequency: 10 dB; Insertion Loss At Maximum Frequency: 40 dB;
20VR1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 20 A; High Pot: 2250 V; Maximum Leakage Current: .4 mA; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
600APS12L
TE Connectivity's 600APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a high pot of 2200V and max leakage current of 270mA. Ideal for panel mounting applications, this filter operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
SCF25XV-280-2R1A005JV
SINGLE PHASE EMI FILTER;
B82732F2901B001
TDK
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RP135-1-1-QD
Astrodyne Tdi
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Approvals (V): CSA; EN; UL; Mounting Type: CHASSIS MOUNT; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel;
RP135-1-10-QD
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Operating Temperature: 100 Cel; Manufacturer Series: RP135; Maximum Leakage Current: 1.8 mA; Mounting Type: CHASSIS MOUNT;
RP135-1-2.2-QD
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Approvals (V): CSA; EN; UL; Length: 44 mm; Mounting Type: CHASSIS MOUNT; Manufacturer Series: RP135;
RP135-16-2.2-QD
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Operating Frequency (Hz): 50-60Hz; Height: 29 mm; Approvals (V): CSA; EN; UL; Minimum Operating Temperature: -25 Cel;
RP135-16-4.7-QD
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Manufacturer Series: RP135; Maximum Leakage Current: .8 mA; High Pot: 2700 V; Height: 29 mm;
RP135-180-100-S
SINGLE PHASE EMI FILTER; Rated Current: 180 A; Operating Frequency (Hz): 50-60Hz; Height: 70 mm; Mounting Type: CHASSIS MOUNT; Rated Voltage: 250 V;
RP135-20-0-QD
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Width (mm): 51; Approvals (V): CSA; EN; UL; Rated Voltage: 250 V; Mounting Type: CHASSIS MOUNT;
RP135-20-0.47-QD
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Manufacturer Series: RP135; Length: 65 mm; Maximum Operating Temperature: 100 Cel; Rated Voltage: 250 V;
RP135-20-1-QD
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Maximum Operating Temperature: 100 Cel; Manufacturer Series: RP135; Mounting Type: CHASSIS MOUNT; Approvals (V): CSA; EN; UL;
RP135-20-4.7-QD
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Manufacturer Series: RP135; Length: 65 mm; Rated Voltage: 250 V; Mounting Type: CHASSIS MOUNT;
RP135-200-100-S
SINGLE PHASE EMI FILTER; Rated Current: 200 A; Length: 171 mm; Maximum Leakage Current: 18 mA; Operating Frequency (Hz): 50-60Hz; Height: 70 mm;
RP135-200-22-S
SINGLE PHASE EMI FILTER; Rated Current: 200 A; Width (mm): 108; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Length: 171 mm;
RP135-3-0-QD
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Manufacturer Series: RP135; Width (mm): 44; Height: 17 mm;
RP135-3-0.47-QD
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 44 mm; High Pot: 2700 V; Mounting Type: CHASSIS MOUNT; Operating Frequency (Hz): 50-60Hz;
RP135-3-10-QD
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Manufacturer Series: RP135; High Pot: 2700 V; Height: 17 mm; Operating Frequency (Hz): 50-60Hz;
RP135-30-22-S
SINGLE PHASE EMI FILTER; Rated Current: 30 A; Maximum Leakage Current: 4 mA; Height: 29 mm; Length: 51 mm; Operating Frequency (Hz): 50-60Hz;
RP135-6-0.47-QD
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: CHASSIS MOUNT; Length: 44 mm; Manufacturer Series: RP135; Maximum Leakage Current: .08 mA;
RP135-6-10-QD
SINGLE PHASE EMI FILTER; Rated Current: 6 A; High Pot: 2700 V; Manufacturer Series: RP135; Maximum Leakage Current: 1.8 mA; Operating Frequency (Hz): 50-60Hz;
RP135-60-100-S
SINGLE PHASE EMI FILTER; Rated Current: 60 A; High Pot: 2700 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 100 Cel; Width (mm): 84;
RP135-1-0-QD
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Leakage Current: 0 mA; Height: 17 mm; High Pot: 2700 V; Mounting Type: CHASSIS MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved