Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
Median Price
$0.536
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$0.126
100+ parts
$0.124
1k+ parts
10k+ parts
-
Verical
$0.520
$0.480
DigiKey
$0.930
$0.767
$0.692
$0.644
Farnell
$0.551
Master Electronics
$0.481
Chip1Stop
$69.700
$64.400
Nova Conductors
$0.608
IBS Electronics
$0.466
Vyrian
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
Ampacity Inc.
$0.409
Aranea Global
$0.596
$0.572
Argo Parts USA
$0.590
Continental Prestige Electronics
CoreStaff
$1.030
$0.440
$0.393
Corohmni
$2.321
Aztec Data Supply Inc.
$2.459
Glotronic Ltd.
Perfect Parts
EMI Mains Filters SU9VF-02100 attributes and parameters. Explore more EMI Mains Filters devices from Tokin
Filter Type:
Height:
High Pot:
Minimum Insulation Resistance:
Length:
Mounting Type:
Rated Current:
Rated Voltage:
Width (mm):
To promote globalization. To maximize the potential of your company. And for the future, to make a further leap forward. Tokin has made a new start by becoming a member of KEMET in the United States. KEMET is a leading manufacturer of capacitors with extensive networks in the United States and Europe. We started manufacturing capacitors in 1958 and have now grown to become a global leader in the electronic component manufacturing industry. We have thousands of employees doing business in locations around the world. Capacitors and electromagnetic components created through constant research and development and cutting-edge engineering are used in a wide range of products in a wide range of industries, including aircraft, mobile devices, automobiles, industrial equipment, cloud computing, and medical equipment, and have earned a high reputation. I'm here. At KEMET, not only the company, but also each and every employee of the company adheres to the attitude of putting the customer first, delivering products speedily to customers in all regions of the world, and always keeping in mind fair transactions and appropriate sales prices. I'm here. In addition to product innovation and high quality, we are an electronic component manufacturer that maintains high standards in all aspects such as global strategy, customer satisfaction, environmental consideration, and social contribution. By joining the KEMET Group this time, Tokin's strengths in products for consumer electronics and the Asian market, and KEMET's strengths in products for industrial equipment and automobiles and the European and American markets will complement each other, resulting in an even larger and stronger company. evolved into an organization.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Weitronic Enterprise
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Lite-on Semiconductor
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Plessey Semiconductors Discrete Components Div
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SN8S-400JB
KEMET Corporation
KEMET Corporation's SN8S-400JB is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating temperature ranges from -25°C to 105°C. This EMI Mains Filter, measuring 12.5mm x 18mm x 18mm, is ideal for through hole mounting applications.
3-103-985
Schurter Ag
Schurter Ag's 3-103-985 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. With 16A rated current, it operates at -40 to 100°C, suitable for panel mounting in applications requiring effective EMI filtering at 50/60Hz frequency.
6ET1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 6 A; Minimum Frequency: .01 MHz; Manufacturer Series: T; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
FN2090-16-06
Schaffner Holding Ag
The Schaffner Holding Ag FN2090-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 17.9A. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and is panel mountable. Ideal for applications requiring effective EMI filtering in electrical systems.
SC-10-30J
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 3 MILLI HENRY; Height: 33 mm;
7448051012
Wuerth Elektronik & Kg
Wurth Elektronik 7448051012 is a single-phase EMI filter with 250V rated voltage and 10A current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125°C, and dimensions of 23mm width, 34mm length, and 33mm height. Ideal for applications requiring EMI mains filtering in electronics.
NAH-20-222
Cosel
The Cosel NAH-20-222 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it's ideal for chassis mount applications requiring high pot of 2500V and operating temperatures from -40 to 85 °C.
PLA10AN1030R7R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm;
250APS12L
TE Connectivity
The TE Connectivity 250APS12L is a UL-approved EMI mains filter with a rated voltage of 520V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, making it suitable for panel mounting in various industrial applications requiring high-potential and low-leakage current protection.
SCF25XV-130-1R5A012JV
SINGLE PHASE EMI FILTER;
SC-15-05J
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Dimensions: L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch); Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 0.5 MILLI HENRY; Rated Voltage: 250 V;
FMW-65-0001
Schurter Ag's FMW-65-0001 EMI Mains Filter is a UL, IEC, VDE, and ENEC-10 approved three-phase filter with 440V rated voltage. With a max operating temperature of 100°C and high pot of 3000V, it has a rated current of 3A. Ideal for panel mounting applications in various industries due to its compact dimensions (L66.0xB51.0xH43.0 mm).
6609053-5
TE Connectivity's 6609053-5 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. It operates b/w -10°C to 40°C, suitable for PANEL MOUNT applications in EMI mains filtering at 50Hz frequency.
SCF20-05-550
SINGLE PHASE EMI FILTER; Rated Current: 5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Width (mm): 15.5;
FN2030-4-06
FN2030-4-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L50.5xB44.5xH22.3 mm, it operates at temperatures ranging from -25 to 100 °C and can handle high pot up to 1100V.
30DKCS5
Delta Electronics
The Delta Electronics 30DKCS5 is a single-phase EMI filter with UL, CSA, and VDE approvals. It has a rated voltage of 250V and a max leakage current of 2mA. With dimensions of L74.7xB51.8xH39.1mm, it is ideal for panel mount applications in electrical systems requiring up to 30A of current.
SSRH7H-M10108
KEMET Corporation's SSRH7H-M10108 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1A. This single-phase filter operates b/w -25°C to 120°C and is UL approved. It is designed for through-hole mounting applications requiring effective electromagnetic interference filtering.
SS30V-R180190
KEMET Corporation's SS30V-R180190 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max operating temperature of 120°C. With a rated current of 1.8A, it is designed for through-hole mounting applications where EMI filtering is required to ensure optimal performance and reliability in electronic systems.
RN212-0.6-02-15M
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
FN343-10-05
FN343-10-05 by Schaffner Holding Ag is a UL, CSA, and ENEC-14 approved single-phase EMI filter with a rated voltage of 250V. It operates at temperatures ranging from -25°C to 100°C and has a max leakage current of 0.34mA. This panel mount filter is ideal for applications requiring effective electromagnetic interference suppression in the frequency range of 50/60Hz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SU9V-R05034
MAINS FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Packing Method: TRAY; Width (mm): 11;
SU9V-R01180
MAINS FILTER; Rated Current: .1 A; Minimum Operating Temperature: -25 Cel; Height: 17 mm; Approvals (V): UL; Width (mm): 11;
SU9VF-02100
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Height: 17 mm; Mounting Type: THROUGH HOLE MOUNT; Length: 17 mm; Width (mm): 11;
SU9V-02080
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Height: 17 mm; Dimensions: L17.0XB11.0XH17.0 (mm)/L0.669XB0.433XH0.669 (inch); Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY;
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Terminal Finish: NOT SPECIFIED; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Length: 17 mm;
SU9VF-07015
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 17 mm; Width (mm): 11; High Pot: 500 V; Height: 17 mm;
SU9VF-03060
SINGLE PHASE FILTER; Rated Current: .3 A; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Length: 17 mm; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 17 mm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Rated Voltage: 250 V;
SU9VD-07010
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Minimum Operating Temperature: -25 Cel; Height: 17 mm; Width (mm): 11.0; Minimum Insulation Resistance: 100 Mohm;
SU9VD-07020
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Rated Voltage: 250 V; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
SU9VD-07030
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: TRAY; Length: 17 mm; Minimum Operating Temperature: -25 Cel; Width (mm): 11.0;
SU9VD-07040
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Mounting Type: THROUGH HOLE MOUNT; Length: 17 mm; Height: 17 mm;
SU9V-05020
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Width (mm): 11; Packing Method: TRAY; Length: 17 mm; Maximum Operating Temperature: 125 Cel;
SU9V-07010
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
SU9V-10005
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 17 mm; Terminal Finish: NOT SPECIFIED; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Dimensions: L17.0XB11.0XH17.0 (mm)/L0.669XB0.433XH0.669 (inch); Height: 17 mm; Width (mm): 11.0; Operating Frequency (Hz): 50Hz;
SU9VF-05030
SINGLE PHASE EMI FILTER; Rated Current: .5 A; High Pot: 500 V; Height: 17 mm; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V;
SU9VF-01250
SINGLE PHASE EMI FILTER; Rated Current: .1 A; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Width (mm): 11; Rated Voltage: 250 V;
SU9V-01100
Multicomp Pro
SINGLE PHASE EMI FILTER; Rated Current: .1 A; Rated Voltage: 250 V; Width (mm): 11; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm;
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Height: 17 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved