Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET Corporation's SU9VF-03060 EMI Mains Filter is a single-phase filter with 250V rated voltage and 0.3A rated current. With a temperature range of -25 to 120°C, it is suitable for through-hole mounting applications. This compact filter, measuring 11mm in width and 17mm in height, is ideal for noise suppression in electronic devices.
Median Price
$0.580
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
-
1k+ parts
$0.560
10k+ parts
DigiKey
$0.930
$0.767
$0.692
$0.644
Mouser Electronics
$0.770
Master Electronics
$0.570
Chip1Stop
$0.552
$0.460
$0.404
IBS Electronics
$0.563
TME
$0.615
ACDS - Activité Composants Distribution Service
Nova Conductors
Ampacity Inc.
$0.493
CoreStaff
$1.030
$0.440
$0.393
Corohmni
$2.291
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Netroflash
The high rated voltage capability makes it suitable for use in various applications without risk of overloading.
Single phase filter design ensures efficient removal of electromagnetic interference for better overall performance.
Can withstand high operating temperatures, making it reliable in demanding environments.
Works effectively even in low temperature conditions, ensuring a wide range of usability.
Compact width allows for easy installation in tight spaces or on crowded PCBs.
The length of the filter provides adequate space for necessary components and ensures proper functionality.
Tray packaging ensures easy handling and storage of multiple filters, simplifying logistics and inventory management.
Through hole mounting offers secure attachment to PCBs, providing stability and durability in operation.
Suitable rated current for various electronic devices, ensuring proper functionality and protection against current surges.
Optimal height for efficient integration into electronic systems, maintaining a sleek and organized design.
EMI Mains Filters SU9VF-03060 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Filter Type:
Height:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
SU9VF-03060 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1554216004
Molex
WIRE AND CABLE;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
MBR1560CT
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
STMicroelectronics
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
10VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 10 A; Length: 84.8 mm; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 40 dB;
7448051804
Wuerth Elektronik & Kg
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
CMS3-4-R
Eaton Corporation
The Eaton Corporation's CMS3-4-R EMI Mains Filter is a single-phase filter with UL approval. It features 4 terminals, rated for 3.95A current, and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L11.43xB11.43xH6.0mm and uses Tin/Silver/Copper terminal finish.
10VV1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Rated Voltage: 120 V; Height: 38.9 mm; Approvals (V): UL; CSA; VDE;
FN3258-130-35
Schaffner Holding Ag
The Schaffner Holding Ag FN3258-130-35 is a UL, CSA, ENEC-14 approved 480V three-phase EMI mains filter with a rated current of 130A. It operates b/w -25°C to 100°C and has a high pot of 2650V. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
RN212-0.5-02
RN212-0.5-02 by Schaffner Holding Ag is a UL and VDE approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -40°C to 125°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of 12.5mm x 18mm x 20mm, it has a rated current of 0.5A and mounts through holes efficiently.
CMS3-1-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Packing Method: TAPE AND REEL; Approvals (V): UL; Dimensions: L11.43XB11.43XH6 (mm); Minimum Operating Temperature: -40 Cel;
3VSK1
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Height: 29.5 mm; Minimum Frequency: .01 MHz;
RN114-0.3-02-47M
Schaffner Holding Ag's RN114-0.3-02-47M EMI Mains Filter, rated at 300V and 0.3A, is UL, IEC, VDE, ENEC-10 approved. With a single-phase filter type and operating temperatures from -40 to 100°C, it's ideal for applications requiring through-hole mounting in 50/60Hz environments.
1-6609037-4
TE Connectivity's 1-6609037-4 is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 40°C. With dimensions of L93.73XB57.66XH45.72 (mm), it is panel mountable and suitable for applications requiring a rated current of 15A.
SN8D-300JB
KEMET Corporation
KEMET Corporation's SN8D-300JB is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating temperature ranges from -25°C to 105°C, making it suitable for various applications requiring EMI mains filtering. With dimensions of 15.5mm x 18.5mm x 18mm, it is designed for through-hole mounting in electronic devices.
400APS12P
TE Connectivity's 400APS12P is a UL-approved THREE PHASE EMI FILTER with 690V rated voltage and 400A rated current. With a wide operating temperature range (-10 to 50 °C), it is ideal for panel mount applications requiring high pot (2640V) and low leakage current (390mA).
FN2020B-20-06
Schaffner Holding Ag's FN2020B-20-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a high pot of 2500V, and a max leakage current of 0.002mA. This single-phase filter has dimensions of L64.8xB49.8xH30.3mm and is ideal for chassis mounting applications with a rated current of 23A at an operating frequency of 50/60Hz.
8-1609148-2
TE Connectivity's 8-1609148-2 EMI Mains Filter is a THREE PHASE filter with 520V rated voltage and 250A rated current. It operates b/w -10°C to 50°C, with max leakage current of 222mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
3-103-706
Schurter Ag
Schurter Ag's 3-103-706 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. It operates at -40 to 100°C, has 3A rated current, and 0.5mA max leakage current. Ideal for panel mounting applications in various industries due to its compact size (25mm W x 85mm L x 89.5mm H) and frequency range of 50/60Hz.
P3217-AL
Coilcraft
Coilcraft P3217-AL is a UL-approved single-phase EMI filter with 4 terminals, rated for 8.1A current. Operating b/w -40°C to 85°C, it has dimensions of L31.8xB15.88xH31.2 mm and uses tin/silver terminal finish. Ideal for EMI mains filtering applications with through-hole mounting requirements.
FN406B-1-02
Schaffner Holding Ag's FN406B-1-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and a high pot of 2500V. This single-phase filter is ideal for applications requiring through-hole mounting and rated current up to 1A.
20VR1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 20 A; High Pot: 2250 V; Maximum Leakage Current: .4 mA; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
FMAC-0932-2510
Schurter Ag's FMAC-0932-2510 EMI Mains Filter is UL, CUL, VDE, IEC, and ENEC-10 approved with a rated voltage of 480V. It operates at temperatures ranging from -25°C to 100°C and has a max leakage current of 156mA. With dimensions of L201.0xB121.0xH66.0mm, it is ideal for panel mounting in three-phase applications up to 25A.
400APH12L
TE Connectivity's 400APH12L is a UL-approved EMI mains filter with a rated voltage of 520V. It features a three-phase filter type, rated current of 400A, and high pot of 2200V. Ideal for panel mount applications, it operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SU9V-R05034
MAINS FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Packing Method: TRAY; Width (mm): 11;
SU9V-R01180
MAINS FILTER; Rated Current: .1 A; Minimum Operating Temperature: -25 Cel; Height: 17 mm; Approvals (V): UL; Width (mm): 11;
SU9VF-02100
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Height: 17 mm; Mounting Type: THROUGH HOLE MOUNT; Length: 17 mm; Width (mm): 11;
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
SU9V-02080
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Height: 17 mm; Dimensions: L17.0XB11.0XH17.0 (mm)/L0.669XB0.433XH0.669 (inch); Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY;
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Terminal Finish: NOT SPECIFIED; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Length: 17 mm;
SU9VF-07015
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 17 mm; Width (mm): 11; High Pot: 500 V; Height: 17 mm;
SU9VF-03060
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 17 mm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Rated Voltage: 250 V;
SU9VD-07020
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Rated Voltage: 250 V; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
SU9VD-07030
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: TRAY; Length: 17 mm; Minimum Operating Temperature: -25 Cel; Width (mm): 11.0;
SU9VD-07040
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Mounting Type: THROUGH HOLE MOUNT; Length: 17 mm; Height: 17 mm;
SU9V-01100
SINGLE PHASE EMI FILTER; Rated Current: .1 A; Minimum Operating Temperature: -25 Cel; Length: 17 mm; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V;
SU9V-05020
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Width (mm): 11; Packing Method: TRAY; Length: 17 mm; Maximum Operating Temperature: 125 Cel;
SU9V-10005
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 11.0; Maximum Operating Temperature: 120 Cel; Approvals (V): UL; Rated Voltage: 250 V;
SU9V-07010
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
SU9VF-01250
SINGLE PHASE EMI FILTER; Rated Current: .1 A; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Width (mm): 11; Rated Voltage: 250 V;
Multicomp Pro
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 11; Rated Voltage: 250 V; High Pot: 500 V;
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 17 mm; Width (mm): 11; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: .1 A; Rated Voltage: 250 V; Width (mm): 11; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm;
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Height: 17 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved