Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Width (mm): 23; High Pot: 500 V;
Median Price
$2.142
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
Newark
1+ parts
$0.483
100+ parts
1k+ parts
10k+ parts
-
DigiKey
$2.330
$1.645
$1.366
$1.199
Mouser Electronics
$1.650
$1.360
$1.330
Verical
$1.954
Nova Conductors
$1.512
TME
$2.360
$1.410
$1.370
Vyrian
Semicontronic
$0.411
$0.401
$0.399
Argo Parts USA
Continental Prestige Electronics
$1.481
Netroflash
Aztec Data Supply Inc.
$1.850
Corohmni
$2.630
AZTECH Wire
$12.048
Authorized Procurement Solutions
EMI Mains Filters SSR21NH-M12345 attributes and parameters. Explore more EMI Mains Filters devices from Tokin
Filter Type:
Height:
High Pot:
Minimum Insulation Resistance:
Length:
Mounting Type:
Rated Current:
Rated Voltage:
Width (mm):
To promote globalization. To maximize the potential of your company. And for the future, to make a further leap forward. Tokin has made a new start by becoming a member of KEMET in the United States. KEMET is a leading manufacturer of capacitors with extensive networks in the United States and Europe. We started manufacturing capacitors in 1958 and have now grown to become a global leader in the electronic component manufacturing industry. We have thousands of employees doing business in locations around the world. Capacitors and electromagnetic components created through constant research and development and cutting-edge engineering are used in a wide range of products in a wide range of industries, including aircraft, mobile devices, automobiles, industrial equipment, cloud computing, and medical equipment, and have earned a high reputation. I'm here. At KEMET, not only the company, but also each and every employee of the company adheres to the attitude of putting the customer first, delivering products speedily to customers in all regions of the world, and always keeping in mind fair transactions and appropriate sales prices. I'm here. In addition to product innovation and high quality, we are an electronic component manufacturer that maintains high standards in all aspects such as global strategy, customer satisfaction, environmental consideration, and social contribution. By joining the KEMET Group this time, Tokin's strengths in products for consumer electronics and the Asian market, and KEMET's strengths in products for industrial equipment and automobiles and the European and American markets will complement each other, resulting in an even larger and stronger company. evolved into an organization.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
4554
Jw Miller Magnetics
Other Semiconductors;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Synsemi
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
First Components International
PLA10AN1522R0R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1522R0R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. It is used for EMI mains filtering applications requiring 2 A Rated Current in through-hole mounting setups.
SSR21NV-M18164
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 27 mm; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
PLH10AN1612R1P2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 160 MICRO HENRY; HIGH-FREQUENCY TYPE; CORE VERTICAL TYPE STRUCTURE; ALIGNED WINDING TYPE; JESD-609 Code: e2;
P3217-AL
Coilcraft
Coilcraft P3217-AL is a UL-approved single-phase EMI filter with 4 terminals, rated for 8.1A current. Operating b/w -40°C to 85°C, it has dimensions of L31.8xB15.88xH31.2 mm and uses tin/silver terminal finish. Ideal for EMI mains filtering applications with through-hole mounting requirements.
SSR21NH-M12345
25FCD10
Corcom
THREE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 25 A; Insertion Loss At Minimum Frequency: 13 dB; Additional Features: DIN TERMINAL; Height: 64 mm;
SC-15-05J
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Dimensions: L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch); Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 0.5 MILLI HENRY; Rated Voltage: 250 V;
RN212-0.5-02-15M
Schaffner Holding Ag
The Schaffner Holding Ag RN212-0.5-02-15M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.5A rated current. It operates b/w -40 to 100 °C at 50/60Hz frequency. Ideal for single-phase EMI filtering applications due to its compact L18.0XB12.5XH20.0 (mm) dimensions and through-hole mounting type.
SU9VF-02100
KEMET Corporation
KEMET Corporation's SU9VF-02100 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.2A rated current. With a temperature range of -25 to 120°C, it is ideal for EMI mains filtering applications. This filter, measuring 11mm in width and 17mm in length and height, can be mounted through hole.
SCF47B-400-1R8C040J
KEMET Corporation's SCF47B-400-1R8C040J is a UL-approved EMI mains filter with 500V rated voltage and 40A rated current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this filter is mounted through hole and comes in a 70mm length tray packing.
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
PLA10AN3521R2R2B
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
B82722A2302N001
TDK
TDK's B82722A2302N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 3A rated current. It features single-phase filtering, TIN over nickel terminals, and operates at 50/60Hz. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression.
3-103-678
Schurter Ag
Schurter Ag's 3-103-678 EMI Mains Filter is a single-phase filter with 250V rated voltage and 16A current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries due to its compact size of 25mm x 85mm x 89.5mm.
FIL-1S-1-6A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Height: 99 mm; Length: 99.5 mm;
RTEN-5060
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 60 A; Dimensions: L170.0XB90.0XH54.0 (mm)/L6.693XB3.543XH2.126 (inch); Operating Frequency (Hz): 60Hz; Maximum Leakage Current: 5 mA; Maximum Operating Temperature: 85 Cel;
SSRH7HS-M05324
KEMET's SSRH7HS-M05324 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25°C to 120°C. Ideal for applications requiring single-phase EMI filtering, with UL approval. Dimensions: 14.5mm x 18mm x 12mm, mounting via through-hole method at a rated current of 0.5A.
SSR10V-07330
KEMET Corporation's SSR10V-07330 is a UL approved EMI mains filter with 250V rated voltage and 0.7A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and has a compact size of 18mm x 22mm x 13.5mm. Ideal for single-phase EMI filtering applications requiring high pot (500V) protection.
744844471
Wuerth Elektronik & Kg
Wurth Elektronik 744844471 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 9A rated current. Operating temp from -40°C to 125°C, it's ideal for EMI mains filtering applications. Compact at 18.5mm width, 28mm length, and 33mm height, suitable for through-hole mounting in systems with a frequency of 50Hz.
PLA10AN3630R3D2B
Murata Manufacturing's PLA10AN3630R3D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.3A rated current. It operates b/w -25°C to 120°C, offering high insulation resistance of 100 Mohm. Ideal for EMI mains filtering applications due to its compact dimensions of L18.0xB16.0xH17.5 mm and through-hole mounting design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Packing Method: TRAY; Width (mm): 23; Dimensions: L23.0XB23.0XH14.5 (mm)/L0.906XB0.906XH0.571 (inch); Minimum Insulation Resistance: 100 Mohm;
SSR21NV-M12345
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Length: 22 mm;
SSR21NV-M12345 by KEMET Corp is a single-phase EMI filter with a rated voltage of 250V. It has a min insulation resistance of 100 Mohm and can operate at temperatures ranging from -25 to 120 °C. This filter is commonly used in applications requiring EMI mains filtering, such as industrial equipment or power supplies.
SSR21NV-M20125
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Height: 27 mm; Width (mm): 16; Minimum Insulation Resistance: 100 Mohm;
KEMET Corporation's SSR21NV-M20125 is a UL approved EMI mains filter with 250V rated voltage and 2A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L22.0xB16.0xH27.0 mm. Ideal for applications requiring single-phase EMI filtering in electronic devices.
SSR21NH-031810
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 23 mm; Width (mm): 23; Rated Voltage: 250 V; Height: 14.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Maximum Operating Temperature: 120 Cel; High Pot: 500 V; Minimum Operating Temperature: -25 Cel;
SSR21NH-M30064
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 14.5 mm; Width (mm): 23; Length: 23 mm; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 23;
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Approvals (V): UL; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16; Dimensions: L22.0XB16.0XH27.0 (mm)/L0.866XB0.63XH1.063 (inch);
SSR21NH-M031900
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Height: 14.5 mm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm;
SSR21NH-M08680
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Width (mm): 23; Rated Voltage: 250 V; Height: 14.5 mm; High Pot: 500 V;
SSR21NH-M10475
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; High Pot: 500 V; Height: 14.5 mm;
SSR21NH-M15220
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Height: 14.5 mm; Length: 23 mm;
SSR21NH-M18164
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Width (mm): 23; High Pot: 500 V; Rated Voltage: 250 V; Length: 23 mm;
SSR21NH-M041500
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Height: 14.5 mm; Approvals (V): UL; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm;
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; High Pot: 500 V; Minimum Operating Temperature: -25 Cel; Length: 23 mm;
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Approvals (V): UL; High Pot: 500 V; Height: 14.5 mm; Width (mm): 23;
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 14.5 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 23; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved