Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN406-1-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 1A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at -25 to 100 °C and has a max leakage current of 0.373 mA. Ideal for applications requiring through-hole mounting and high-pot testing up to 2000V in frequency range of 50/60Hz.
Median Price
$12.159
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$10.876
100+ parts
$8.431
1k+ parts
-
10k+ parts
RS (Exports)
$13.071
$9.203
$8.735
Distrelec
$13.505
$10.864
$8.438
$9.661
Bürklin Elektronik
$13.540
$11.090
$9.870
DigiKey
$15.450
$10.286
$8.637
Newark
$17.440
$12.280
$12.270
Chip1Stop
$8.030
Verical
$11.247
$10.365
Master Electronics
$10.830
$9.960
Interstate Connecting
$10.032
Nova Conductors
$8.130
Schukat
$11.690
$8.695
TME
$12.870
$9.410
$9.240
NAC Semi
$12.350
Vyrian
IBS Electronics
$13.408
$11.753
Electro Sonic
$8.400
$7.780
Bristol Electronics
Cyclops Electronics Ltd
Ashlea Components Ltd
Holdelec - ElecDif-Pro
Huijzer Components
Partservice
$9.727
LIBRA Elektronik GmbH
Inventory MP
Prism Electronics
Corohmni
$0.670
Aztec Data Supply Inc.
$2.892
Continental Prestige Electronics
$7.967
Netroflash
$7.724
$7.561
Neutron USA
$44.990
Perfect Parts
Argo Parts USA
GreenTree Electronics
Eastek
Abacus Technologies
Cyclops Electronics Ltd (Excess)
These certifications ensure that the product meets safety and performance standards, giving you peace of mind in using it.
Suitable for use in a variety of applications requiring this voltage.
Effectively reduces electromagnetic interference in single-phase systems, improving overall performance.
Allows the filter to operate efficiently even in high-temperature environments, increasing its reliability.
Can function in colder conditions without any issues, making it versatile for various climates.
Compact design allows for easy integration into different systems with space constraints.
Covers common frequency ranges, making it compatible with standard power supplies.
Optimal size for effective filtering without taking up too much space.
Can withstand high voltage levels, enhancing safety and durability.
Keeps leakage current at a low level, reducing potential safety hazards.
Easy to install and secure in place for stable operation.
Provides precise measurements for accurate integration and fit.
Can handle a current rating of 1 A, suitable for many applications without overloading.
Compact height allows for flexible placement in different setups.
EMI Mains Filters FN406-1-02 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
B82722J2302N001
TDK
The TDK B82722J2302N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
NAC-20-472
Cosel
The Cosel NAC-20-472 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it is ideal for chassis mount applications requiring high pot of 2500V and max leakage current of 1mA at temperatures ranging from -40 to 85°C.
SCF19XV-150-1R3A006JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
B82732F2901B001
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
7448227005
Wuerth Elektronik & Kg
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
RSEN-2010D
The TDK RSEN-2010D is a single-phase EMI filter with 250V rated voltage and 10A rated current. It offers approvals from UL, CSA, EN and operates b/w -25°C to 85°C. With dimensions of L98.0xB52.0xH43.5 (mm), it is ideal for panel mount applications requiring high insulation resistance and low leakage current.
3-103-982
Schurter Ag
Schurter Ag's 3-103-982 EMI Mains Filter is CSA, EN, IEC, and UL approved with a rated voltage of 250V. It operates at temperatures from -40°C to 100°C and has a max leakage current of 0.005mA. This single-phase filter is panel-mounted and suitable for applications requiring effective EMI filtering in electrical systems.
7448042001
Wurth Elektronik 7448042001 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -40 to 125 °C, has high pot of 1500V, and dimensions of L30.0xB19.0xH28.0 mm. Ideal for EMI mains filtering in various applications due to its through-hole mounting type and compact size.
SC-02-20G
The KEMET SC-02-20G is a UL-approved EMI mains filter with 100 Mohm min insulation resistance and 250V rated voltage. It operates b/w -25°C to 105°C, has dimensions of L17.5xB14.0xH17.5 mm, and a rated current of 2A. Ideal for single-phase EMI filtering applications requiring through-hole mounting in various electronic devices.
RN102-1-02-3M0
Schaffner Holding Ag
RN102-1-02-3M0 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L14.0xB14.0xH9.0 mm, it is designed for through-hole mounting in various electronic systems.
FN2010B-16-06
Schaffner Holding Ag's FN2010B-16-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and can handle a high pot of 2500V. This single-phase filter is panel mountable and ideal for applications requiring effective electromagnetic interference suppression.
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
SC-07-E030JH-P
KEMET Corporation's SC-07-E030JH-P is a UL approved EMI mains filter with 250V rated voltage and 7A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperatures. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
RSEL-2003WL
The TDK RSEL-2003WL is a single-phase EMI filter with 250V rated voltage and 3A rated current. It offers high insulation resistance of 100 Mohm, approvals from CSA, ENEC-14, and UL. Ideal for panel mounting applications in environments ranging from -25°C to 85°C.
SS30V-R180190
KEMET Corporation's SS30V-R180190 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max operating temperature of 120°C. With a rated current of 1.8A, it is designed for through-hole mounting applications where EMI filtering is required to ensure optimal performance and reliability in electronic systems.
25FCD10
TE Connectivity
TE Connectivity's 25FCD10 EMI Mains Filter is a UL approved three-phase filter with insertion loss of 13-35 dB. Rated at 277V and 25A, it operates b/w -10°C to 40°C, with dimensions of L214.0xB159.0xH64.0 mm. Ideal for applications requiring high-potential and low leakage current protection in industrial settings.
7448680120
Wurth Elektronik 7448680120 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 115°C, suitable for IEC approvals. Ideal for EMI mains filtering applications due to its compact size (27.5mm x 25mm x 10mm) and through-hole mounting design.
SSHB21H-R25056
KEMET SSHB21H-R25056 is a UL approved EMI mains filter with 250V rating and 2.5A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and withstands up to 500V high pot test. Ideal for single-phase EMI filtering applications due to its compact size (23mm x 26mm x 15.5mm) and through-hole mounting design.
DKIH-3358-326K-NK
Schurter Ag's DKIH-3358-326K-NK is a 3-phase EMI filter with 600V voltage rating, 32A current, and -40 to 100°C operating temperature range. Ideal for applications requiring high-potential protection and filtering in industrial settings.
FIL-1S-1-10A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN406-3-02
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Height: 28 mm; Dimensions: L45.0XB15.0XH28.0 (mm)/L1.772XB0.591XH1.102 (inch); Width (mm): 15.0;
FN406B-8.4-02
SINGLE PHASE EMI FILTER; Rated Current: 8.4 A; Maximum Operating Temperature: 100 Cel; Width (mm): 15.0; Rated Voltage: 250 V; Height: 28 mm;
FN406-0.5-02
FN406-0.5-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 0.5A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and dimensions of L45.0xB15.0xH28.0 mm. Ideal for single-phase EMI filtering applications in various industries.
FN402-1.6-02
Schaffner Holding Ag's FN402-1.6-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with 250V rated voltage. It features single-phase filter type, 5 terminals, and 1.9A rated current suitable for applications requiring effective electromagnetic interference suppression in a compact design.
FN406-8.4-02
SINGLE PHASE EMI FILTER; Rated Current: 8.4 A; Dimensions: L45.0XB15.0XH28.0 (mm)/L1.772XB0.591XH1.102 (inch); Approvals (V): UL; CSA; ENEC-14; Additional Features: INDUCTANCE 0.3 MILLIHENRY; High Pot: 2000 V;
FN406-6-02
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 0.78 MILLIHENRY; Length: 45 mm; Maximum Operating Temperature: 100 Cel;
FN406B-1-02
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -25 Cel; Additional Features: MEDICAL VERSION; INDUCTANCE 12 MILLIHENRY; Dimensions: L45.0XB15.0XH28.0 (mm)/L1.772XB0.591XH1.102 (inch); Mounting Type: THROUGH HOLE MOUNT;
FN405-0.5-02
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Operating Frequency (Hz): 50/60Hz; Height: 19.5 mm; Maximum Leakage Current: .373 mA; Dimensions: L36.0XB31.0XH19.5 (mm)/L1.417XB1.22XH0.768 (inch);
FN406B-6-02
Schaffner Holding Ag's FN406B-6-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 6A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2500V. Ideal for applications requiring through-hole mounting in various industries.
FN402-0.5-02
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -25 Cel; Approvals (V): UL; CSA; ENEC-14; Width (mm): 28.0;
FN402-1-02
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Width (mm): 28.0; Length: 45 mm; Dimensions: L45.0XB28.0XH16.5 (mm)/L1.772XB1.102XH0.65 (inch); Minimum Operating Temperature: -25 Cel;
FN402-2.5-02
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50/60Hz; High Pot: 2000 V;
FN402-4-02
SINGLE PHASE EMI FILTER; Rated Current: 4.7 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 45 mm; Minimum Operating Temperature: -25 Cel;
FN402-6.5-02
SINGLE PHASE EMI FILTER; Rated Current: 7.5 A; Approvals (V): UL; CSA; ENEC-14; Rated Voltage: 250 V; Maximum Leakage Current: .373 mA; Maximum Operating Temperature: 100 Cel;
FN405-1-02
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50/60Hz; Length: 36 mm; High Pot: 2000 V;
FN405-10-02
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Approvals (V): UL; CSA; ENEC-14; Length: 36 mm; Operating Frequency (Hz): 50/60Hz; No. of Terminals: 5;
FN405-3-02
FN405-3-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 3.6A rated current. It operates at -25 to 100°C, has 5 terminals, and offers single-phase filtering for applications requiring high pot of 2000V. Dimensions: L36.0xB31.0xH19.5 (mm).
FN405-6-02
SINGLE PHASE EMI FILTER; Rated Current: 6.9 A; Rated Voltage: 250 V; Approvals (V): UL; CSA; ENEC-14; Width (mm): 31.0; Operating Frequency (Hz): 50/60Hz;
FN406B-0.5-02
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Leakage Current: .002 mA; Width (mm): 15.0; Approvals (V): UL; CSA; ENEC-14; Rated Voltage: 250 V;
FN406B-3-02
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 28 mm; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .002 mA; High Pot: 2500 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved