Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Phoenix Contact 2794123 is a UL, IEC, VDE approved EMI Mains Filter with 250V rated voltage and 1A rated current. Its single-phase filter type operates b/w -25°C to 100°C, suitable for DIN rail mounting applications. Dimensions: L79.4xB25.0xH90.3 mm (L3.126xB0.984xH3.555 inch).
Median Price
$112.610
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
$98.580
1k+ parts
-
10k+ parts
Nova Conductors
$123.740
Electro Sonic
$144.540
$114.680
Vyrian
VNN
Dynamic Solutions
AZTECH Wire
$17.652
Ampacity Inc.
$122.360
Netroflash
$121.265
$117.553
$115.078
This product is approved by reputable organizations like UL, IEC, and VDE, ensuring high quality and safety standards.
With a high rated voltage of 250V, this EMI mains filter is suitable for a wide range of applications.
The single phase EMI filter design helps to effectively reduce electromagnetic interference in your electronic devices.
With a maximum operating temperature of 100°C, this filter can handle high-temperature environments without issue.
The impressive minimum operating temperature of -25°C ensures that this filter can be used in cold environments as well.
The compact width of 25.0mm allows for easy installation in various spaces.
The length of 79.4mm provides a good balance between size and performance for this EMI mains filter.
The DIN rail mount makes installation quick and convenient, saving time and effort.
The dimensions of this filter make it versatile and suitable for different setups and configurations.
With a rated current of 1A, this filter can handle moderate power loads effectively.
The height of 90.3mm allows for adequate internal spacing and airflow within the device, promoting efficient operation.
EMI Mains Filters 2794123 attributes and parameters. Explore more EMI Mains Filters devices from Phoenix Contact
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Obsolescence/ EOL - Obsolete 17/NOV/2022
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Semtech Electronics
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
PLA10AN2230R4D2B
Murata Manufacturing
Murata Manufacturing's PLA10AN2230R4D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage, 0.4A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C, ideal for EMI mains filtering applications requiring through-hole mounting in compact spaces.
1000APS12L
TE Connectivity
TE Connectivity's 1000APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting applications, this filter offers high pot protection up to 2200V and max leakage current of 270mA.
SCF47B-400-1R8C040J
KEMET Corporation's SCF47B-400-1R8C040J is a UL-approved EMI mains filter with 500V rated voltage and 40A rated current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this filter is mounted through hole and comes in a 70mm length tray packing.
NEF1-10-2788977
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): UL; IEC; VDE; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel;
SSR21NH-M30064
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 14.5 mm; Width (mm): 23; Length: 23 mm; Rated Voltage: 250 V;
SN13-500
KEMET Corporation's SN13-500 is a SINGLE PHASE EMI FILTER with 6A rated current. Operating temp: -25 to 105°C, diameter: 31mm, height: 18mm. Used in EMI mains filtering applications, mounted through hole in trays.
CMS1-5-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; Height: 2.6 mm;
RN112-0.4-02-39M
Schaffner Holding Ag
Schaffner Holding Ag's RN112-0.4-02-39M is a UL, IEC, VDE approved EMI mains filter with 300V rated voltage and 0.4A current. Ideal for single-phase applications, it operates b/w -40°C to 100°C at 50/60Hz frequency. Dimensions: L17.7xB17.1xH12.6 mm, suitable for through-hole mounting.
PLA10AN1522R0R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
SCR47B-350-S2R0B010J
KEMET's SCR47B-350-S2R0B010J EMI Mains Filter has 100 Mohm Min Insulation Resistance, 500 V High Pot, and 35 A Rated Current. Ideal for THREE PHASE applications with UL approval, operating b/w -25 to 120 °C in a Through Hole Mount setup.
PLA10AN3030R4R2B
Murata Manufacturing's PLA10AN3030R4R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 100 Mohm min insulation resistance. Operating b/w -25 to 120 °C, it has a 0.4A rated current and dimensions of L18.0xB16.0xH17.5 mm. Ideal for EMI mains filtering applications with through-hole mounting requirement.
JAC-10-103-D
Cosel
JAC-10-103-D by Cosel is a 3-phase EMI filter with UL and CSA approvals. It has a rated voltage of 500V, rated current of 10A, and max leakage current of 1mA. Ideal for industrial applications requiring efficient EMI mains filtering in a compact DIN rail mount design.
B84112B0000B020
TDK
TDK's B84112B0000B020 is a 250V UL/CSA/ENEC-10 approved EMI mains filter with 2A rated current. Featuring single-phase filter type, it offers 2700V high pot and 0.5mA max leakage current. Ideal for panel mount applications, its compact dimensions of L50xB45xH28.6mm make it suitable for various electronic devices requiring effective electromagnetic interference suppression.
5500.2025
Schurter Ag
The Schurter Ag 5500.2025 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V and rated current of 16A. It operates b/w -25°C to 100°C, has high pot of 2700V, and max leakage current of 0.5mA. This single-phase filter with through-hole mount is ideal for applications requiring effective electromagnetic interference suppression.
FN351H-50-33
Schaffner Holding Ag's FN351H-50-33 is a 3-phase EMI filter with approvals from CSA and ENEC-14. It has a rated voltage of 520V, rated current of 57.7A, and operates at temperatures ranging from -25°C to 100°C. This panel mount filter is designed for applications requiring effective electromagnetic interference suppression in industrial settings.
SS21V-R300013
KEMET Corporation's SS21V-R300013 EMI Mains Filter is UL approved with 250V rating, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and features a compact size of L20.6xB16.8xH24.5 mm for through-hole mounting in various electronic devices.
10VSB1
The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
6EHQ1
TE Connectivity's 6EHQ1 EMI Mains Filter offers UL, CSA, VDE approvals with insertion loss of 24-42 dB. Rated at 250V and 6A, it operates b/w -10 to 40°C for single-phase filtering in applications requiring noise suppression up to 0.15 MHz frequencies.
P3215-AL
Coilcraft
Coilcraft's P3215-AL EMI Mains Filter is a single-phase filter with 4 terminals. It has UL approval and can handle up to 3.2A current. With dimensions of L31.8xB15.88xH31.2 mm, it is ideal for applications requiring EMI filtering in electronic devices operating b/w -40°C to 85°C temperature range.
ESP-03-221-D
The Cosel ESP-03-221-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. With a max operating temperature of 85°C and high pot of 2500V, it's ideal for DIN rail mounting in applications requiring efficient EMI mains filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved