Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Width (mm): 45; Height: 99 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$10.600
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$11.660
$10.494
EMI Mains Filters FIL-1S-1-10A-230AC-UT attributes and parameters. Explore more EMI Mains Filters devices from Phoenix Contact
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Rated Current:
Rated Voltage:
Width (mm):
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Vishay Sprague
1VB1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 1 A; Operating Frequency (Hz): 50/60Hz; Insertion Loss At Minimum Frequency: 15 dB; Manufacturer Series: B;
3-103-678
Schurter Ag
Schurter Ag's 3-103-678 EMI Mains Filter is a single-phase filter with 250V rated voltage and 16A current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries due to its compact size of 25mm x 85mm x 89.5mm.
NAH-20-472
Cosel
NAH-20-472 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and dimensions of L92.0XB53.0XH41.0 (mm), it is suitable for chassis mount applications requiring up to 20A current capacity.
RN214-2-02-4M2
Schaffner Holding Ag
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
SSR21NV-M18164
KEMET Corporation
SSR21NV-M18164 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage, 1.8A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C, suitable for single-phase applications requiring high pot of 500V. Dimensions are L22.0xB16.0xH27.0 mm for through-hole mounting in various electronic devices.
DR334A-513AE
Bourns
DR334A-513AE by Bourns is a SINGLE PHASE EMI FILTER with 42V rated voltage, operating from -40 to 135 °C. Measuring 6mm in length, 5.8mm in width, and 3.6mm in height, it's ideal for EMI mains filtering applications at 60Hz frequency using surface mounting method.
SCT19XV-150-1R3A006JV
KEMET's SCT19XV-150-1R3A006JV is a SINGLE PHASE EMI FILTER with 1000V voltage rating, 15A current, and -40 to 150°C operating range. Ideal for EMI mains filtering applications due to its high insulation resistance of 100 Mohm. Dimensions: 18.4mm W x 27mm L x 27.5mm H, through-hole mount type.
SC-03-10G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 17.5 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 14; Rated Voltage: 250 V;
7448030417
Wuerth Elektronik & Kg
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
MR-2021
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Leakage Current: .75 mA; Minimum Operating Temperature: -20 Cel; Height: 27 mm; Width (mm): 49;
SC-30-12JH
KEMET Corporation's SC-30-12JH is a 250V UL-approved EMI mains filter with 30A rated current. Featuring a single-phase filter type, it offers high insulation resistance of 100 Mohm and operates b/w -25°C to 105°C. Ideal for applications requiring effective electromagnetic interference suppression in various electronic systems.
FN2410-32-33
FN2410-32-33 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 32A rated current. Operating at temperatures from -25°C to 100°C, it offers high pot of 1100V and max leakage current of 3.4mA. Ideal for DIN rail mounting applications with dimensions of L108.0xB93.0xH76.0mm, this filter operates at an operating frequency of 400Hz.
1000APS12L
TE Connectivity
TE Connectivity's 1000APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting applications, this filter offers high pot protection up to 2200V and max leakage current of 270mA.
SCF31B-180-S1R7A013J
KEMET Corporation's SCF31B-180-S1R7A013J is a UL approved EMI mains filter with 500V rated voltage and 18A current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for three-phase applications, this filter is mounted through hole and measures 32mm x 46.5mm x 44mm in dimensions.
CMS3-9-R
Eaton Corporation
Eaton Corporation's CMS3-9-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.7A. Ideal for surface mount applications due to its compact dimensions of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish and comes in tape and reel packaging.
FIL-1S-1-6A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Height: 99 mm; Length: 99.5 mm;
SCF20-05-550
SINGLE PHASE EMI FILTER; Rated Current: 5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Width (mm): 15.5;
FIL-1S-1-1A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Width (mm): 27; Mounting Type: PANEL MOUNT;
3-103-982
Schurter Ag's 3-103-982 EMI Mains Filter is CSA, EN, IEC, and UL approved with a rated voltage of 250V. It operates at temperatures from -40°C to 100°C and has a max leakage current of 0.005mA. This single-phase filter is panel-mounted and suitable for applications requiring effective EMI filtering in electrical systems.
CMS1-6-R
CMS1-6-R by Eaton Corp is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.1A. This single-phase filter is surface-mounted and compactly sized at L9.4xB7.2xH2.6mm, suitable for various electronic applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FIL-1S-1-10A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
FIL-1S-1-1A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: PANEL MOUNT; Width (mm): 27; Height: 99 mm; Rated Voltage: 230 V;
FIL-1S-1-20A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Width (mm): 45; Height: 99 mm; Approvals (V): IEC; UL; VDE; Length: 99.5 mm;
FIL-1S-1-20A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 99.5 mm; Width (mm): 45; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE;
FIL-1S-1-3A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Height: 99 mm; Length: 99.5 mm;
FIL-1S-1-3A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Width (mm): 27; Height: 99 mm;
FIL-1S-1-6A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 45; Height: 99 mm; Length: 99.5 mm; Rated Voltage: 230 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved