Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET SSHB21H-R25056 is a UL approved EMI mains filter with 250V rating and 2.5A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and withstands up to 500V high pot test. Ideal for single-phase EMI filtering applications due to its compact size (23mm x 26mm x 15.5mm) and through-hole mounting design.
Median Price
$2.350
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Newark
1+ parts
$0.469
100+ parts
1k+ parts
10k+ parts
DigiKey
$2.230
$1.863
$1.688
$1.524
Mouser Electronics
$2.820
$2.220
$1.510
$1.210
Master Electronics
-
$2.380
$1.670
Verical
Vyrian
Nova Conductors
Rapid Electronics
$2.632
IBS Electronics
$2.306
$1.631
Advanced Electronics
$0.614
$0.559
$0.503
Ampacity Inc.
$0.880
Aztec Data Supply Inc.
$0.896
Corohmni
$2.602
Argo Parts USA
Continental Prestige Electronics
Aranea Global
High insulation resistance ensures safety and reliability in preventing electrical leakage.
UL approval signifies compliance with rigorous safety standards, giving confidence in the product's quality and reliability.
Suitable for applications requiring a maximum voltage of 250V, providing versatility in usage.
Designed specifically to handle single-phase EMI interference, effectively reducing noise and improving signal quality.
High maximum operating temperature ensures durability and reliability even in demanding environments.
Low minimum operating temperature allows for use in a wide range of temperature conditions, making it versatile.
Compact width of 23mm enables easy installation in limited spaces, saving valuable real estate.
Optimal length of 26mm provides a good balance between performance and space efficiency.
High withstand voltage of 500V ensures protection against electrical overloads and disturbances.
Tray packaging ensures safe transportation and storage, preventing damage during handling.
Through-hole mounting offers secure and reliable installation, ensuring stability in operation.
Rated current of 2.5A indicates capability to handle moderate electrical loads with efficiency.
Compact height of 15.5mm allows for flexible placement in various setups, optimizing space usage.
EMI Mains Filters SSHB21H-R25056 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
High Pot:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Nexperia
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
PLA10AN3030R4R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm;
SC22-05-30J
KEMET Corporation
KEMET Corporation's SC22-05-30J EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 5A. It is a single-phase filter with UL approval, operating b/w -25°C to 120°C. Ideal for applications requiring effective electromagnetic interference filtering in compact spaces.
RN112-4-02-0M7
Schaffner Holding Ag
RN112-4-02-0M7 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 4A rated current. It has approvals from UL, IEC, VDE, and ENEC-10. This filter operates b/w -40°C to 100°C and is suitable for applications requiring EMI mains filtering in various industries.
CMS2-1-R
Eaton Corporation
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
RSEL-2003W
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
SC-05-50J
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Operating Frequency (Hz): 50Hz; Additional Features: INDUCTANCE 5 MILLI HENRY; Maximum Operating Temperature: 60 Cel; Minimum Insulation Resistance: 100 Mohm;
RSEL-2003WL
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 60Hz; Width (mm): 45;
FN406-3-02
Schaffner Holding Ag's FN406-3-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 3A rated current. It operates at -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.373mA. Ideal for applications requiring through-hole mounting in systems with 50/60Hz operating frequency.
FN5420-1000-99-E0XXT
THREE PHASE EMI FILTER;
AFH461/EM
Infineon Technologies
SINGLE PHASE EMI FILTER; Package Material: METAL; Maximum Operating Temperature: 125 Cel; No. of Terminals: 5; Minimum Operating Temperature: -55 Cel;
5500.2001
Schurter Ag
The Schurter Ag 5500.2001 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates b/w -25 to 85°C, and offers high pot protection up to 2700V. This single-phase filter with through-hole mount is ideal for applications requiring effective EMI filtering at 60Hz frequency.
6EHT3
TE Connectivity
TE Connectivity's 6EHT3 is a CSA, UL, VDE approved EMI mains filter with 250V rated voltage and 6A rated current. With single-phase filter type, it operates at -10 to 40°C temperatures and offers high pot of 2250V. Ideal for panel mounting applications due to its compact dimensions of L85.9xB54.6xH46 mm (L3.38xB2.15xH1.81 inch).
FN2020A-20-06
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
SSRH7H-M07196
KEMET Corporation's SSRH7H-M07196 is a UL approved EMI mains filter with 100 Mohm insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 120°C and has a rated current of 0.7A. It is designed for through-hole mounting applications, measuring 14.5mm in width, 18mm in length, and 12mm in height.
3-103-706
Schurter Ag's 3-103-706 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. It operates at -40 to 100°C, has 3A rated current, and 0.5mA max leakage current. Ideal for panel mounting applications in various industries due to its compact size (25mm W x 85mm L x 89.5mm H) and frequency range of 50/60Hz.
LF-202U-1
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Leakage Current: 1 mA; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -20 Cel; Height: 25 mm;
RP135-20-10-QD
Astrodyne Tdi
RP135-20-10-QD by Astrodyne Tdi is a 250V single-phase EMI filter with CSA, EN, and UL approvals. It operates at -25 to 100°C, has a rated current of 10A, and offers high pot protection up to 2700V. Ideal for chassis mounting applications requiring effective filtering in the 50-60Hz frequency range.
SU9VF-03060
KEMET Corporation's SU9VF-03060 EMI Mains Filter is a single-phase filter with 250V rated voltage and 0.3A rated current. With a temperature range of -25 to 120°C, it is suitable for through-hole mounting applications. This compact filter, measuring 11mm in width and 17mm in height, is ideal for noise suppression in electronic devices.
FPP2-25-1/A
Schurter Ag's FPP2-25-1/A EMI Mains Filter is rated for 250V, 1A with approvals from UL, EN, IEC. It operates at 50/60Hz frequency, offers high pot of 2700V and max leakage current of 0.25mA. Ideal for applications requiring single-phase EMI filtering using through-hole mounting.
SSR21NH-M12345
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Width (mm): 23; High Pot: 500 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSHB21HS-30013
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 23; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Minimum Insulation Resistance: 100 Mohm;
SSHB10HS-30006
SSHB10HS-30006 by KEMET Corporation is a SINGLE PHASE EMI FILTER with a rated voltage of 250 V and a rated current of 3 A. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 130 °C. This filter is commonly used for EMI mains filtering applications.
SSHB21HS-10145
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 15.5 mm; Minimum Operating Temperature: -25 Cel; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm;
SSHB21HS-15064
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Rated Voltage: 250 V;
SSHB21HS-18046
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Packing Method: TRAY;
SSHB10HS-17019
KEMET Corporation's SSHB10HS-17019 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25 to 130 °C. Ideal for applications requiring UL approval, this single-phase filter with a rated current of 1.7A is designed for through-hole mounting in various electronic devices.
SSHB10HS-R17046
KEMET Corporation's SSHB10HS-R17046 is a UL approved EMI mains filter with 250V rated voltage and 1.7A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for applications requiring single-phase EMI filtering in compact spaces.
SSHB21HS-12110
KEMET Corporation's SSHB21HS-12110 EMI Mains Filter has a rated voltage of 250V, rated current of 1.2A, and high pot of 500V. It operates b/w -25°C to 130°C and is UL approved for applications requiring single-phase EMI filtering in various electronic devices.
SSHB21HS-08200
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Height: 15.5 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL;
SSHB10HS-R11100
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Length: 22 mm; Maximum Operating Temperature: 120 Cel; Width (mm): 17; Mounting Type: THROUGH HOLE MOUNT;
SSHB10H-R04760
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Width (mm): 17; Maximum Operating Temperature: 120 Cel; Approvals (V): UL; Height: 15.5 mm;
SSHB21HS-R10300
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 26 mm; Height: 15.5 mm; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm;
SSHB21H-R30050
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Approvals (V): UL; High Pot: 500 V; Height: 15.5 mm; Rated Voltage: 250 V;
SSHB21H-R031580
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Approvals (V): UL; Length: 26 mm;
SSHB21H-R041250
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 23; Rated Voltage: 250 V;
SSHB21H-R06825
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Width (mm): 23; Packing Method: TRAY; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
SSHB21H-R07700
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 26 mm; Rated Voltage: 250 V; Packing Method: TRAY; Width (mm): 23;
SSHB21H-R10377
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 23; Height: 15.5 mm; Mounting Type: THROUGH HOLE MOUNT; Length: 26 mm;
SSHB21H-R12296
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Minimum Operating Temperature: -25 Cel; Length: 26 mm; Height: 15.5 mm; Width (mm): 23;
SSHB21H-R20094
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 130 Cel; Approvals (V): UL; Rated Voltage: 250 V; Height: 15.5 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved