Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Schurter Ag 5500.2003 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates at -25 to 85°C temperatures, and offers high pot of 2700V. Ideal for single-phase EMI filtering applications with a rated current of 4A and dimensions of L25.0xB25.0xH25.0 mm.
Median Price
$9.477
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$7.820
100+ parts
$5.080
1k+ parts
-
10k+ parts
Mouser Electronics
$9.200
$5.980
DigiKey
$10.760
$7.164
$6.080
Newark
$10.670
$8.610
Verical
$9.226
Arrow
$9.728
$9.309
Nova Conductors
$5.720
TME
$9.870
$7.530
$6.910
VNN
Vyrian
NAC Semi
$10.780
ACDS - Activité Composants Distribution Service
Semicontronic
$4.980
$4.856
$4.831
Continental Prestige Electronics
$6.990
Neutron USA
$39.990
Argo Parts USA
Perfect Parts
Having multiple approvals ensures that the EMI mains filter meets safety and quality standards set by different international organizations, making it a reliable choice for use in various applications.
The high rated voltage allows the EMI mains filter to handle electrical loads up to 250 volts, making it suitable for a wide range of mains power applications.
Having 5 terminals offers flexibility in wiring connections and compatibility with different circuit configurations, enhancing the usability of the EMI mains filter.
The single-phase EMI filter design helps to reduce electromagnetic interference in power lines, ensuring clean and stable power supply to connected devices.
With a high maximum operating temperature of 85°C, this EMI mains filter can withstand elevated temperature environments, increasing its durability and reliability.
The low minimum operating temperature of -25°C allows the EMI mains filter to be used in cold conditions without performance degradation, making it suitable for diverse environments.
The tin finish on the terminals provides good conductivity, corrosion resistance, and solderability, ensuring reliable connections and long-term performance of the EMI mains filter.
The compact width of 25.0 mm allows for easy integration and installation of the EMI mains filter in space-constrained applications, optimizing the use of available space.
The designed operating frequency of 60Hz ensures compatibility with standard power systems, enabling seamless integration of the EMI mains filter for effective EMI suppression.
The 25 mm length of the EMI mains filter offers a balanced form factor, making it suitable for various equipment designs and installation scenarios.
The high potential (high pot) rating of 2700 volts ensures robust insulation and protection against voltage surges, improving the safety and reliability of the EMI mains filter.
The maximum leakage current of 0.25 mA indicates low leakage levels, enhancing the efficiency of the EMI mains filter in reducing interference without wasting excessive power.
The through-hole mounting design facilitates easy and secure mounting of the EMI mains filter on circuit boards, ensuring stable connections and mechanical strength in various applications.
The compact dimensions of the EMI mains filter make it suitable for space-limited installations, providing a versatile solution for EMI suppression in different electronic systems.
With a rated current of 4 amperes, this EMI mains filter can handle moderate current loads, making it suitable for various electrical equipment and appliances.
The 25 mm height provides a balanced form factor for the EMI mains filter, enabling flexible placement and efficient heat dissipation in different installation setups.
EMI Mains Filters 5500.2003 attributes and parameters. Explore more EMI Mains Filters devices from Schurter Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
JESD-609 Code:
Maximum Leakage Current:
Length:
Mounting Type:
No. of Terminals:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
FN2090B-20-08
Schaffner Holding Ag
Schaffner Holding Ag's FN2090B-20-08 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 22.4A rated current. Operating at -25 to 100°C, it offers high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications in various industries due to its compact dimensions of L94.0xB56.0xH45.4mm.
FN405-0.5-02
FN405-0.5-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 0.6A rated current. It operates at temperatures from -25 to 100°C, has 5 terminals, and a max leakage current of 0.373mA. This single-phase filter is ideal for applications requiring through-hole mounting in systems with high operating frequencies of 50/60Hz.
250APS12P
TE Connectivity
The TE Connectivity 250APS12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 390mA. Ideal for panel mounting applications, it measures 160mm in width, 208mm in length, and stands at a height of 123mm.
SN13-500
KEMET Corporation
KEMET Corporation's SN13-500 is a SINGLE PHASE EMI FILTER with 6A rated current. Operating temp: -25 to 105°C, diameter: 31mm, height: 18mm. Used in EMI mains filtering applications, mounted through hole in trays.
3-103-982
Schurter Ag
Schurter Ag's 3-103-982 EMI Mains Filter is CSA, EN, IEC, and UL approved with a rated voltage of 250V. It operates at temperatures from -40°C to 100°C and has a max leakage current of 0.005mA. This single-phase filter is panel-mounted and suitable for applications requiring effective EMI filtering in electrical systems.
PLA10AN2230R4D2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Additional Features: INDUCTANCE 22 MILLI HENRY; SECTIONAL WINDING TYPE; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Maximum Operating Temperature: 120 Cel; Height: 17.5 mm;
1-6609037-4
TE Connectivity's 1-6609037-4 is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 40°C. With dimensions of L93.73XB57.66XH45.72 (mm), it is panel mountable and suitable for applications requiring a rated current of 15A.
FN2412-32-33
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
25FCD10
TE Connectivity's 25FCD10 EMI Mains Filter is a UL approved three-phase filter with insertion loss of 13-35 dB. Rated at 277V and 25A, it operates b/w -10°C to 40°C, with dimensions of L214.0xB159.0xH64.0 mm. Ideal for applications requiring high-potential and low leakage current protection in industrial settings.
7448053201
Wuerth Elektronik & Kg
Wurth Elektronik 7448053201 is a single-phase EMI filter with a rated voltage of 250V and current of 32A. It operates b/w -40°C to 125°C, suitable for applications requiring ENEC-10 and VDE approvals. With dimensions of 23mm x 37mm x 34mm, it is designed for through-hole mounting in various electronic devices.
SCR38C-130-S1R4A015JH
KEMET's SCR38C-130-S1R4A015JH is a 3-phase EMI filter with UL approval, rated for 500V and 13A. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a diameter of 50mm. Ideal for applications requiring efficient mains filtering in industrial settings.
3-123-459
3-123-459 by Schurter Ag is a THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 16A. It has approvals from IEC, UL, VDE for applications requiring EMI mains filtering. With a high pot of 2750V and operating temperatures ranging from -40 to 100 °C, it is suitable for panel mount installations in industrial settings.
744841330
744841330 by Wurth Elektronik is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It is approved by ENEC-10, IEC, and VDE. This filter is suitable for applications requiring noise suppression in mains power systems.
CMS2-1-R
Eaton Corporation
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
6MV1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 6 A; Insertion Loss At Maximum Frequency: 50 dB; Maximum Leakage Current: .07 mA; Minimum Frequency: .15 MHz;
RN214-0.3-02-47M
The Schaffner Holding Ag RN214-0.3-02-47M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.3A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L23.0xB15.5xH25.0mm for through-hole mounting in various electronic devices.
FN2410H-100-34
The Schaffner Holding Ag FN2410H-100-34 is a single-phase EMI mains filter with 520V rated voltage and 100A rated current. It has approvals from UL, CSA, and ENEC-14, suitable for applications requiring high pot of 2250V and max leakage current of 3.4mA. With DIN rail mounting and compact dimensions of L140.0xB115.0xH100.0 mm, it operates b/w -25°C to 100°C at an operating frequency of 250Hz.
B82732F2901B001
TDK
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5500.2044
SINGLE PHASE EMI FILTER; Rated Current: 6 A; High Pot: 2700 V; Terminal Finish: TIN COPPER/TIN; Approvals (V): UL; CUL; VDE; ENEC-10; Minimum Operating Temperature: -25 Cel;
5500.2001
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 25 mm; Length: 25 mm; Rated Voltage: 250 V; Additional Features: INDUCTANCE 10 MILLIHENRY;
5500.2655.01
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Height: 30 mm; Rated Voltage: 250 V; Maximum Leakage Current: .5 mA; Maximum Operating Temperature: 100 Cel;
5500.2658.03
SINGLE PHASE EMI FILTER; Rated Current: 60 A; Length: 100 mm; Approvals (V): ENEC-10; UL; VDE; Minimum Insulation Resistance: 1 Mohm; Maximum Leakage Current: 1 mA;
5500.2025
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Mounting Type: THROUGH HOLE MOUNT; Height: 25.5 mm; Minimum Operating Temperature: -25 Cel; Width (mm): 34.5;
5500.2000
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Terminal Finish: TIN; No. of Terminals: 5; Length: 25 mm; Height: 25 mm;
5500.2002
SINGLE PHASE EMI FILTER; Rated Current: 2 A; JESD-609 Code: e3; Mounting Type: THROUGH HOLE MOUNT; High Pot: 2700 V; Width (mm): 25.0;
5500.2004
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -25 Cel; Height: 25 mm; Maximum Leakage Current: .25 mA;
5500.2005
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Operating Frequency (Hz): 60Hz; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; CUL; VDE; ENEC-10; Height: 25 mm;
5500.2006
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Terminal Finish: TIN; Additional Features: INDUCTANCE 20 MILLIHENRY; Maximum Operating Temperature: 85 Cel; Operating Frequency (Hz): 60Hz;
5500.2007
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Length: 30 mm; Maximum Operating Temperature: 85 Cel;
5500.2008
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 30 mm; Terminal Finish: TIN; High Pot: 2700 V; Additional Features: INDUCTANCE 3 MILLIHENRY;
5500.2009
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Approvals (V): UL; CUL; VDE; ENEC-10; Height: 30 mm; Additional Features: INDUCTANCE 30 MILLIHENRY; Dimensions: L40.0XB40.0XH30.0 (mm)/L1.575XB1.575XH1.181 (inch);
5500.2010
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Approvals (V): UL; CUL; VDE; ENEC-10; Operating Frequency (Hz): 60 ; Length: 40 mm; Rated Voltage: 250 V;
5500.2014
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Additional Features: INDUCTANCE 40 MILLIHENRY; Rated Voltage: 250 V; Maximum Leakage Current: .25 mA; Mounting Type: THROUGH HOLE MOUNT;
5500.2015
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: L45.0XB24.0XH17.5 (mm)/L1.772XB0.945XH0.689 (inch); Operating Frequency (Hz): 60Hz; Height: 17.5 mm;
5500.2016
SINGLE PHASE EMI FILTER; Rated Current: 1.6 A; Maximum Operating Temperature: 85 Cel; Maximum Leakage Current: .25 mA; Approvals (V): UL; CUL; VDE; ENEC-10; Dimensions: L45.0XB24.0XH17.5 (mm)/L1.772XB0.945XH0.689 (inch);
5500.2017
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Width (mm): 24.0; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Length: 45 mm;
5500.2018
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 24.0; Approvals (V): UL; CUL; VDE; ENEC-10; Additional Features: INDUCTANCE 1 MILLIHENRY; Dimensions: L45.0XB24.0XH17.5 (mm)/L1.772XB0.945XH0.689 (inch);
5500.2019
SINGLE PHASE EMI FILTER; Rated Current: 6.5 A; Maximum Operating Temperature: 85 Cel; Width (mm): 24.0; Length: 45 mm; Approvals (V): UL; CUL; VDE; ENEC-10;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved