Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET Corporation's SN8D-500 is a SINGLE PHASE EMI FILTER with 2A rated current, operating from -25 to 105°C. Measuring 17mm in diameter and 13mm in height, it is designed for EMI mains filtering applications using through hole mounting method.
Median Price
$2.780
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$2.050
100+ parts
$1.290
1k+ parts
$1.050
10k+ parts
-
DigiKey
$1.877
$1.545
$1.430
Mouser Electronics
$1.860
$1.540
$1.420
Newark
$3.110
$2.240
$1.920
$1.830
Element14
$3.680
$2.490
$2.170
$2.120
Verical
$1.916
$1.858
TME
$2.500
$1.650
$1.510
ACDS - Activité Composants Distribution Service
Nova Conductors
Corohmni
$1.992
Continental Prestige Electronics
$1.230
Ampacity Inc.
$2.220
CoreStaff
$7.847
$1.371
Netroflash
Allen Electronics Distributors
This EMI filter is designed for single phase applications, providing efficient filtering of electromagnetic interference for a wide range of electrical equipment.
With a high maximum operating temperature of 105°C, this EMI mains filter ensures reliable performance even in demanding industrial environments where temperatures can fluctuate.
The low minimum operating temperature of -25°C allows this EMI filter to function effectively even in cold climates or during startup in colder conditions.
With a compact diameter of 17mm, this EMI mains filter can easily fit into various electronic enclosures or equipment without taking up much space.
Being packaged in bulk enables cost-effective purchasing and stocking of multiple filters, making it a convenient option for manufacturers or distributors.
The through-hole mounting type simplifies the installation process, allowing for secure and stable mounting of the EMI filter onto circuit boards or panels with ease.
With a rated current of 2A, this EMI mains filter is suitable for handling moderate levels of electrical current, making it ideal for various electronic devices and equipment.
The compact height of 13mm ensures that this EMI filter can be easily integrated into space-constrained applications while still providing effective EMI suppression.
EMI Mains Filters SN8D-500 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Diameter (mm):
Filter Type:
Height:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
First Components International
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
20VB1
TE Connectivity
TE Connectivity's 20VB1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 7 dB at min frequency and 48 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
3VR3
The TE Connectivity 3VR3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 30 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
SSR21NV-M12345
KEMET Corporation
SSR21NV-M12345 by KEMET Corp is a single-phase EMI filter with a rated voltage of 250V. It has a min insulation resistance of 100 Mohm and can operate at temperatures ranging from -25 to 120 °C. This filter is commonly used in applications requiring EMI mains filtering, such as industrial equipment or power supplies.
PLA10AN2230R4D2B
Murata Manufacturing
Murata Manufacturing's PLA10AN2230R4D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage, 0.4A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C, ideal for EMI mains filtering applications requiring through-hole mounting in compact spaces.
UU9LFBNP-B-B163
Sumida
Sumida UU9LFBNP-B-B163 is a SINGLE PHASE EMI FILTER with 4 terminals, rated at 0.16A. Its compact size of L16.5xB11.0xH16.5 (mm) makes it ideal for through-hole mounting applications requiring effective EMI mains filtering in limited space environments.
7448053201
Wuerth Elektronik & Kg
Wurth Elektronik 7448053201 is a single-phase EMI filter with a rated voltage of 250V and current of 32A. It operates b/w -40°C to 125°C, suitable for applications requiring ENEC-10 and VDE approvals. With dimensions of 23mm x 37mm x 34mm, it is designed for through-hole mounting in various electronic devices.
63AYC10B
THREE PHASE EMI FILTER; Rated Current: 63 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
RN212-0.5-02-18M
Schaffner Holding Ag
RN212-0.5-02-18M by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.5A rated current. It operates b/w -40°C to 100°C, suitable for applications requiring EMI mains filtering. With UL, IEC, VDE, and ENEC-10 approvals, it's ideal for through-hole mounting in various electronic devices.
7448012501
Wurth Elektronik 7448012501 is a single-phase EMI filter with 250V rated voltage and 2.5A current. With approvals from ENEC-10 and VDE, it operates b/w -40°C to 125°C making it ideal for applications requiring noise suppression in mains power circuits.
TF2326VU-300Y5R0-1H
TDK
TF2326VU-300Y5R0-1H by TDK is a UL, CSA, and IEC approved EMI mains filter with a rated voltage of 280V. It features a single-phase filter type, operates b/w -20°C to 120°C, and has a rated current of 5A. This through-hole mount filter with dimensions D23XL20 (mm) is ideal for applications requiring effective electromagnetic interference suppression.
SSR21NV-M20125
KEMET Corporation's SSR21NV-M20125 is a UL approved EMI mains filter with 250V rated voltage and 2A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L22.0xB16.0xH27.0 mm. Ideal for applications requiring single-phase EMI filtering in electronic devices.
10VW1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .5 mA; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 65 dB;
SS11V-06180-CH
SS11V-06180-CH by KEMET is a SINGLE PHASE EMI FILTER with 250V rated voltage, 0.6A rated current, and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, has dimensions of L22.0xB14.5xH21.5 mm, and withstands high pot testing up to 500V. Ideal for EMI mains filtering applications with through hole mounting requirements.
SC-30-12JH
KEMET Corporation's SC-30-12JH is a 250V UL-approved EMI mains filter with 30A rated current. Featuring a single-phase filter type, it offers high insulation resistance of 100 Mohm and operates b/w -25°C to 105°C. Ideal for applications requiring effective electromagnetic interference suppression in various electronic systems.
CMS2-7-R
Eaton Corporation
Eaton Corporation's CMS2-7-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.6A. Ideal for surface mount applications due to its compact dimensions of L8.89xB8.89xH6.0 mm and tape-and-reel packing method.
3EDP
TE Connectivity's 3EDP EMI Mains Filter is UL, CSA, VDE approved with 250V rating. It features single-phase filter type, 3A rated current, and max leakage current of 0.25mA. Ideal for PCB mounting applications in electronics to reduce electromagnetic interference at operating temperatures from -10°C to 40°C.
5500.2658.03
Schurter Ag
Schurter Ag's 5500.2658.03 EMI Mains Filter is a single-phase filter with 250V rated voltage and 60A rated current. It offers approvals from ENEC-10, UL, VDE for applications requiring high insulation resistance (1 Mohm) and low leakage current (1 mA). Ideal for chassis mounting in environments with temperatures ranging from -40°C to 100°C at frequencies of 50-60Hz.
6EQ1
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
1000APS12P
TE Connectivity's 1000APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. This three-phase filter has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting, it ensures efficient filtering in industrial applications.
B82722J2202N001
TDK B82722J2202N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SN8D-300JB
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 18.5 mm; Height: 18 mm; Width (mm): 15.5; Approvals (V): UL;
SN8D-500
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -25 Cel; Height: 13 mm; Diameter (mm): 17;
SN8D-300
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; Packing Method: BULK; Minimum Operating Temperature: -25 Cel; Diameter (mm): 16;
SN8D-400JB
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; Minimum Operating Temperature: -25 Cel; Height: 18 mm; Mounting Type: THROUGH HOLE MOUNT;
SN8D-400
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 105 Cel; Diameter (mm): 16; Packing Method: BULK;
SN8D-500JB
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 18.5 mm; Width (mm): 15.5; Packing Method: TRAY; Height: 18 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved