Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft P3217-AL is a UL-approved single-phase EMI filter with 4 terminals, rated for 8.1A current. Operating b/w -40°C to 85°C, it has dimensions of L31.8xB15.88xH31.2 mm and uses tin/silver terminal finish. Ideal for EMI mains filtering applications with through-hole mounting requirements.
Median Price
$4.910
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Coilcraft
1+ parts
100+ parts
-
1k+ parts
$3.290
10k+ parts
$2.640
Nova Conductors
Bristol Electronics
$2.240
Ampacity Inc.
$3.970
Continental Prestige Electronics
Argo Parts USA
Aranea Global
UL approval ensures that the product meets safety and quality standards, making it a reliable choice for industrial applications.
Having four terminals provides flexibility in installation and connection options, allowing for easier integration into existing systems.
The single-phase EMI filter helps to reduce electromagnetic interference, ensuring stable operation and minimizing disruptions in sensitive equipment.
With a high maximum operating temperature of 85°C, this filter can withstand harsh environmental conditions, making it suitable for a wide range of applications.
The low minimum operating temperature of -40°C ensures that the filter remains functional even in extreme cold environments, enhancing its reliability.
The tin/silver terminal finish provides good conductivity and corrosion resistance, ensuring a reliable and long-lasting connection.
The compact width of 15.88mm allows for space-saving installation in tight spaces, making it ideal for applications with limited room.
The length of 31.8mm provides a good balance between compactness and functionality, fitting well in various equipment setups.
The through-hole mounting type enables secure and stable installation, reducing the risk of vibration-induced damage and ensuring long-term reliability.
The compact and standardized dimensions make this filter compatible with a wide range of equipment designs, simplifying integration and replacement.
With a high rated current of 8.1A, this filter can effectively handle power surges and fluctuations, protecting connected devices from electrical damage.
The height of 31.2mm allows for efficient airflow and heat dissipation, helping to maintain optimal operating conditions and prolonging the lifespan of the filter.
EMI Mains Filters P3217-AL attributes and parameters. Explore more EMI Mains Filters devices from Coilcraft
Approvals (V):
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Daco Semiconductor
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
B84131-M1-G135
TDK
B84131-M1-G135 by TDK is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 35A rated current. It features a three-phase filter type, high pot of 2700V, and max leakage current of 3.5mA. Ideal for panel mount applications in industrial settings due to its compact dimensions of L149xB104xH80mm.
B82722A2202N002
TDK B82722A2202N002 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, 50/60Hz operating frequency, and through-hole mounting. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
B82732F2901B001
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
SU9VF-03060
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 17 mm; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Rated Voltage: 250 V;
5500.2025
Schurter Ag
The Schurter Ag 5500.2025 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V and rated current of 16A. It operates b/w -25°C to 100°C, has high pot of 2700V, and max leakage current of 0.5mA. This single-phase filter with through-hole mount is ideal for applications requiring effective electromagnetic interference suppression.
7448680120
Wuerth Elektronik & Kg
Wurth Elektronik 7448680120 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 115°C, suitable for IEC approvals. Ideal for EMI mains filtering applications due to its compact size (27.5mm x 25mm x 10mm) and through-hole mounting design.
RSHN-2006D
The TDK RSHN-2006D is a UL, CSA, EN approved EMI mains filter with 250V rated voltage and 6A rated current. It operates b/w -25°C to 85°C, with max leakage current of 1mA. Ideal for single-phase EMI filtering applications, it features DIN rail mounting and compact dimensions of L98.0xB52.0xH35.0mm (L3.858xB2.047xH1.378inch).
CMS1-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.8 A; Additional Features: INDUCTANCE 18 MICRO HENRY; Minimum Operating Temperature: -40 Cel; Height: 2.6 mm; Length: 9.4 mm;
10VR6
The TE Connectivity 10VR6 EMI Mains Filter has a rated voltage of 250V and insertion loss ranging from 5dB to 65dB. With approvals from UL, CSA, and VDE, it is suitable for single-phase applications with an operating frequency of 50/60Hz. This panel-mount filter measures L85.1xB52.6xH38.9mm and can handle a rated current of 10A while offering high pot protection up to 2250V.
SCF29XV-050-1R0A044JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
SCF20-05-1100
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 15.5; Maximum Operating Temperature: 50 Cel; Height: 25 mm; No. of Terminals: 4;
SSHB21HS-08200
KEMET Corporation's SSHB21HS-08200 is a UL-approved EMI mains filter with 100 Mohm min insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 130°C and has a max high pot of 500V. Ideal for through-hole mounting applications requiring 0.8A current handling capacity.
10VK1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; High Pot: 2250 V; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 50/60Hz;
CMS2-1-R
Eaton Corporation
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
CMS1-10-R
Eaton Corporation's CMS1-10-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.65A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
6VS1
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
RTEN-2020
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: PANEL MOUNT; Maximum Leakage Current: 1 mA; Minimum Insulation Resistance: 100 Mohm; Height: 42 mm;
7448013501
Wurth Elektronik 7448013501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 3.5A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40 to 125 °C, suitable for applications requiring EMI mains filtering in through-hole mounting setups.
6ET1
The TE Connectivity 6ET1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 16 dB at the min frequency and 42 dB at the max frequency. With a rated voltage of 250V, it is ideal for panel mounting applications in electronics to reduce electromagnetic interference.
RN112-0.8-02-10M
Schaffner Holding Ag
Schaffner Holding Ag's RN112-0.8-02-10M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI filter with 300V rated voltage and 0.8A current. Operating at -40 to 100 °C, it's ideal for applications requiring EMI mains filtering in a compact L17.7xB17.1xH12.6 mm through-hole mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P3215-AL
SINGLE PHASE EMI FILTER; Rated Current: 3.2 A; Height: 31.2 mm; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e2;
P3213-AL
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; No. of Terminals: 4; Width (mm): 15.88; Approvals (V): UL; Length: 31.8 mm;
P3214-AL
SINGLE PHASE EMI FILTER; Rated Current: 2 A; No. of Terminals: 4; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width (mm): 15.88;
P3216-AL
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Maximum Operating Temperature: 85 Cel; Length: 31.8 mm; Width (mm): 15.88; Dimensions: L31.8XB15.88XH31.2 (mm)/L1.252XB0.625XH1.228 (inch);
P3218-AL
SINGLE PHASE EMI FILTER; Rated Current: 13 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Dimensions: L31.8XB15.88XH31.2 (mm)/L1.252XB0.625XH1.228 (inch); Mounting Type: THROUGH HOLE MOUNT;
P3219-AL
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; JESD-609 Code: e2; Approvals (V): UL; Dimensions: L35.6XB22.86XH35.6 (mm)/L1.402XB0.9XH1.402 (inch); Length: 35.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved