Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's P3215-AL EMI Mains Filter is a single-phase filter with 4 terminals. It has UL approval and can handle up to 3.2A current. With dimensions of L31.8xB15.88xH31.2 mm, it is ideal for applications requiring EMI filtering in electronic devices operating b/w -40°C to 85°C temperature range.
Median Price
$6.180
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Coilcraft
1+ parts
100+ parts
-
1k+ parts
$3.590
10k+ parts
$2.840
Nova Conductors
Advanced Electronics
$1.228
$1.117
$1.007
Modulus Dynamics
$1.504
Argo Parts USA
Continental Prestige Electronics
Aranea Global
UL approval ensures high quality and safety standards are met.
More terminals allow for easier installation and connection.
Specifically designed for single phase EMI filtering, ensuring effective noise reduction.
High maximum operating temperature allows for reliable performance even in demanding conditions.
Wide range of operating temperatures ensures versatility in various environments.
Tin/silver terminal finish provides good conductivity and corrosion resistance.
Compact width makes it easier to fit into tight spaces.
Optimal length for efficient filtering and compatibility with standard setups.
Through hole mounting offers sturdy and secure installation.
Convenient dimensions for easy integration into various systems.
Sufficient rated current for handling typical power loads effectively.
Optimal height for efficient filtering and compatibility with standard setups.
EMI Mains Filters P3215-AL attributes and parameters. Explore more EMI Mains Filters devices from Coilcraft
Approvals (V):
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Crimson Semiconductor
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
FN2080-10-06
Schaffner Holding Ag
FN2080-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 11.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L130.5XB56.0XH45.4 (mm), it is suitable for chassis mount installations in various electronic equipment to ensure efficient electromagnetic interference suppression.
3-103-676
Schurter Ag
Schurter Ag's 3-103-676 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications requiring effective filtering at frequencies of 50/60Hz.
SCR38C-130-S1R4A015JH
KEMET Corporation
KEMET's SCR38C-130-S1R4A015JH is a 3-phase EMI filter with UL approval, rated for 500V and 13A. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a diameter of 50mm. Ideal for applications requiring efficient mains filtering in industrial settings.
SCF25XV-190-1R8A008JH
SINGLE PHASE EMI FILTER;
PLA10AN1522R0R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
B82722S0193A041
TDK
TDK's B82722S0193A041 is a 48V single-phase EMI mains filter with 19A rated current. It operates b/w -40°C to 125°C, suitable for IEC approvals and surface mount installation. Ideal for applications requiring effective filtering at 50/60Hz frequency in compact spaces.
SCF25XV-240-2R0A006JV
SCF25XV-240-2R0A006JH
FIL-1S-1-3A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Height: 99 mm; Length: 99.5 mm;
PLA10AN5521R0R2B
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
6EQ1
TE Connectivity
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
6EHT3
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Maximum Leakage Current: .002 mA; Insertion Loss At Minimum Frequency: 16 dB;
UU9LFBNP-B-B163
Sumida
Sumida UU9LFBNP-B-B163 is a SINGLE PHASE EMI FILTER with 4 terminals, rated at 0.16A. Its compact size of L16.5xB11.0xH16.5 (mm) makes it ideal for through-hole mounting applications requiring effective EMI mains filtering in limited space environments.
RP357-600-1000-B
Astrodyne Tdi
Astrodyne Tdi's RP357-600-1000-B is a 3-phase EMI filter with 600V rated voltage and 600A rated current. It operates b/w -25°C to 100°C, approved by EN and UL standards. Ideal for panel mounting applications requiring high pot of 3800V and max leakage current of 10mA at an operating frequency of 50-60Hz.
CMS2-11-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Minimum Operating Temperature: -40 Cel; Dimensions: L8.89XB8.89XH6 (mm); Packing Method: TAPE AND REEL; Length: 8.89 mm;
5500.2025
The Schurter Ag 5500.2025 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V and rated current of 16A. It operates b/w -25°C to 100°C, has high pot of 2700V, and max leakage current of 0.5mA. This single-phase filter with through-hole mount is ideal for applications requiring effective electromagnetic interference suppression.
FN700Z-6-06
Schaffner Holding Ag's FN700Z-6-06 is a 3-phase EMI filter with approvals from UL, CSA, EN. Rated for 250V and 6.9A, it operates at -25 to 85°C. Ideal for panel mounting in applications requiring high pot of 590V and max leakage current of 0.44mA.
CMS2-7-R
Eaton Corporation
Eaton Corporation's CMS2-7-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.6A. Ideal for surface mount applications due to its compact dimensions of L8.89xB8.89xH6.0 mm and tape-and-reel packing method.
CMS1-7-R
Eaton Corporation's CMS1-7-R is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.6A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
6EDP
TE Connectivity's 6EDP EMI Mains Filter offers UL, CSA, VDE approvals. With insertion loss ranging from 10 dB to 40 dB, it operates at 50/60Hz frequency and rated voltage of 250V. Ideal for PCB mounting, this single-phase filter has a compact size of L36.6xB31.5xH24.15mm and is suitable for applications requiring up to 6A current handling capacity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P3217-AL
SINGLE PHASE EMI FILTER; Rated Current: 8.1 A; JESD-609 Code: e2; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Width (mm): 15.88;
P3213-AL
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; No. of Terminals: 4; Width (mm): 15.88; Approvals (V): UL; Length: 31.8 mm;
P3214-AL
SINGLE PHASE EMI FILTER; Rated Current: 2 A; No. of Terminals: 4; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width (mm): 15.88;
P3216-AL
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Maximum Operating Temperature: 85 Cel; Length: 31.8 mm; Width (mm): 15.88; Dimensions: L31.8XB15.88XH31.2 (mm)/L1.252XB0.625XH1.228 (inch);
P3218-AL
SINGLE PHASE EMI FILTER; Rated Current: 13 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Dimensions: L31.8XB15.88XH31.2 (mm)/L1.252XB0.625XH1.228 (inch); Mounting Type: THROUGH HOLE MOUNT;
P3219-AL
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; JESD-609 Code: e2; Approvals (V): UL; Dimensions: L35.6XB22.86XH35.6 (mm)/L1.402XB0.9XH1.402 (inch); Length: 35.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved