Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 6609046-7 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
Median Price
$58.470
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Avnet
1+ parts
$48.420
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$53.800
$46.250
$46.010
Verical
$54.140
Heilind Electronics
$73.416
$57.356
Interstate Connecting
$74.593
$58.377
RS (Exports)
$82.790
$66.230
Newark
$85.470
$81.280
Powell Electronics
$204.300
$143.010
$128.170
Chip1Stop
$57.100
DigiKey
$57.740
Farnell
Future Electronics
$52.260
Bristol Electronics
$48.000
$38.880
Electro Sonic
$71.040
$56.020
$53.360
IBS Electronics
$83.246
$66.971
$66.303
VNN
Nova Conductors
Rapid Electronics
Vyrian
NAC Semi
$92.850
Extreme Components
Aztec Data Supply Inc.
$1.013
Argo Parts USA
Continental Prestige Electronics
Assy Fe
Aranea Global
UL; CSA; VDE - This product's multiple approvals ensure it meets high safety and quality standards.
12 dB - With a significant reduction in interference at low frequencies, this filter offers enhanced performance.
250 V - Able to handle high voltages, making it suitable for a wide range of applications.
SINGLE PHASE EMI FILTER - This type of filter efficiently reduces electromagnetic interference to improve equipment performance.
45 dB - High attenuation at maximum frequencies ensures optimal signal clarity and reliability.
40 °C - Capable of operating in elevated temperatures, ensuring consistent performance.
10 °C - Can function in cold environments, making it versatile for various operating conditions.
57.7 - Compact design allows for easy integration into different setups.
0.01 MHz - Effective filtering at low frequencies to minimize signal distortion.
50/60Hz - Compatible with standard power frequencies for widespread applications.
103.2 mm - Provides sufficient surface area for efficient filtering.
30 MHz - Effective interference suppression over a broad range of frequencies for reliable operation.
2250 V - High dielectric strength for enhanced safety and protection in high-voltage environments.
0.3 mA - Low leakage current ensures energy efficiency and safety.
PANEL MOUNT - Convenient mounting option for easy installation and maintenance.
L103.2XB57.7XH45.7 (mm)/L4.063XB2.272XH1.799 (inch) - Compact size for versatile placement options in different systems.
10 A - Capable of handling moderate electrical loads for reliable performance.
45.7 mm - Slim profile allows for flexible installation in space-constrained applications.
EMI Mains Filters 6609046-7 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Approvals (V):
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
High Pot:
Insertion Loss At Maximum Frequency:
Insertion Loss At Minimum Frequency:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Hy Electronic
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
UF1717V-300Y1R2-03
UF1717V-300Y1R2-03 by TDK is a single-phase EMI mains filter with 4 terminals and rated voltage of 280V. It offers a min insulation resistance of 100 Mohm, operates at temperatures from -20 to 120 °C, and has UL, CSA, IEC approvals. Ideal for applications requiring noise suppression in electrical systems.
SU9VF-02100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
PLA10AN5521R0R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
PS0S0DH6A
TE Connectivity
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
810913020112
Wuerth Elektronik & Kg
Wurth Elektronik 810913020112 is a CSA, ENEC-10, IEC, UL, VDE approved SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -25°C to 100°C temperature range and has a high pot of 1075V. Ideal for panel mount applications due to its compact dimensions of 58.5mm x 114.9mm x 45mm.
SCR25XV-220-1R9A007JH
KEMET Corporation
KEMET Corporation's SCR25XV-220-1R9A007JH is a 1000V rated SINGLE PHASE EMI filter with 22A current. Operating temperature ranges from -40°C to 120°C. It is used in EMI mains filtering applications due to its compact size and through-hole mounting design.
5VR1
TE Connectivity's 5VR1 EMI Mains Filter offers UL, CSA, VDE approvals. With insertion loss ranging from 5 dB to 65 dB, it operates at 50/60Hz frequency and rated voltage of 250V. Ideal for single-phase applications with a rated current of 5A, this panel mount filter ensures efficient noise reduction in electronic systems.
NBH-30-681-D
Cosel
The Cosel NBH-30-681-D is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 30A, it is suitable for DIN rail mounting in various applications requiring effective EMI filtering.
6EQ1
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
6VS1
TE Connectivity's 6VS1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 15 dB at 0.15 MHz and 40 dB at 2 MHz. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
PLA10AN1522R0R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1522R0R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. It is used for EMI mains filtering applications requiring 2 A Rated Current in through-hole mounting setups.
6VV1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Minimum Frequency: 15 dB; Maximum Leakage Current: .5 mA;
RTEN-2020
RTEN-2020 by TDK is a THREE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It offers approvals from UL, EN, and ENEC-14 for various applications. With a wide operating temperature range (-25 to 85 °C) and compact dimensions (140x70x42 mm), it is ideal for panel mount installations in industrial settings.
B82722J2301N001
The TDK B82722J2301N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
1000APS12P
TE Connectivity's 1000APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. This three-phase filter has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting, it ensures efficient filtering in industrial applications.
B82722J2102N001
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
CMS1-10-R
Eaton Corporation
Eaton Corporation's CMS1-10-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.65A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
SC-02-10GS
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 100 Mohm; Length: 15 mm; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT;
SS11V-R10093-CH
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 50Hz; Length: 22 mm; No. of Terminals: 4; Height: 21.5 mm;
7448013501
Wurth Elektronik 7448013501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 3.5A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40 to 125 °C, suitable for applications requiring EMI mains filtering in through-hole mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6609066-3
TE Connectivity's 6609066-3 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, 10A rated current, and 3mA max leakage current. Ideal for panel mounting applications in environments with -10 to 40°C temperature range and 50Hz operating frequency.
6609047-3
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Minimum Operating Temperature: -10 Cel; Operating Frequency (Hz): 50Hz; Mounting Type: PANEL MOUNT; Maximum Leakage Current: 1.2 mA;
6609032-9
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 5 A; Dimensions: L97.8XB52.6XH29.5 (mm)/L3.85XB2.071XH1.161 (inch); Minimum Operating Temperature: -10 Cel; Length: 97.8 mm;
6609053-5
TE Connectivity's 6609053-5 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. It operates b/w -10°C to 40°C, suitable for PANEL MOUNT applications in EMI mains filtering at 50Hz frequency.
6609069-6
SINGLE PHASE EMI FILTER; Rated Current: 50 A; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel; Maximum Leakage Current: 7 mA; Minimum Operating Temperature: -10 Cel;
6609037-9
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 20 A; Dimensions: L113.5XB57.7XH45.7 (mm)/L4.469XB2.272XH1.799 (inch); Minimum Frequency: .01 MHz; Maximum Operating Temperature: 40 Cel;
6609046-1
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 3 A; Dimensions: L74.63XB54.6XH46.0 (mm)/L2.938XB2.15XH1.811 (inch); High Pot: 2250 V; Width (mm): 54.6;
6609046-2
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 3 A; Maximum Operating Temperature: 40 Cel; Rated Voltage: 250 V; Insertion Loss At Minimum Frequency: 22 dB;
6609046-4
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel; Height: 46 mm;
6609046-8
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; Length: 93.7 mm; High Pot: 2250 V; Height: 45.7 mm;
6609046-9
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 15 A; Insertion Loss At Maximum Frequency: 43 dB; Dimensions: L138.4XB79.2XH55.4 (mm)/L5.449XB3.118XH2.181 (inch); Minimum Frequency: .01 MHz;
6609052-2
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Minimum Frequency: .01 MHz; Height: 45.7 mm; Maximum Leakage Current: 1.2 mA;
6609053-9
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 50/60Hz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved