Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's RN112-0.4-02-39M is a UL, IEC, VDE approved EMI mains filter with 300V rated voltage and 0.4A current. Ideal for single-phase applications, it operates b/w -40°C to 100°C at 50/60Hz frequency. Dimensions: L17.7xB17.1xH12.6 mm, suitable for through-hole mounting.
Median Price
$1.800
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.073
100+ parts
1k+ parts
10k+ parts
-
Chip1Stop
$1.560
Bürklin Elektronik
$1.610
$1.430
$1.110
Farnell
$1.050
$0.966
Mouser Electronics
$2.100
$1.410
$1.200
$1.160
DigiKey
$2.170
$1.467
$1.207
$1.117
Newark
$2.220
$1.580
$1.370
Element14
$3.410
$1.990
$1.840
TE Connectivity
$3.850
Master Electronics
TTI
$1.080
$1.010
Verical
$1.974
Arrow
$1.188
Nova Conductors
$1.052
Powertech Controls
$1.240
Vyrian
Electro Sonic
$1.582
$1.165
$0.973
NAC Semi
$1.620
Schukat
$1.087
IBS Electronics
$2.214
$1.678
$1.424
Micros
$1.465
$1.439
Partservice
$1.428
$1.403
Micros sp.j. W. Kędra i J. Lic
$1.529
$1.503
LWI Electronics Inc
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Netroflash
Argo Parts USA
Advanced Electronics
Aztec Data Supply Inc.
$1.637
Continental Prestige Electronics
$1.910
$1.230
Corohmni
$2.644
GreenTree Electronics
Glotronic Ltd.
Abacus Technologies
Perfect Parts
Futuretech Components
Robosynatics
$2.877
Lucentia Tech
Having multiple approvals indicates that this EMI mains filter meets international standards for safety and quality.
The high rated voltage of 300V makes this EMI mains filter suitable for a wide range of applications.
The single phase EMI filter design ensures efficient filtering of electromagnetic interference, ensuring clean power output.
With a maximum operating temperature of 100°C, this EMI mains filter can withstand high heat environments.
The low minimum operating temperature of -40°C allows this EMI mains filter to function in cold conditions as well.
The compact width of 17.1mm makes this EMI mains filter suitable for space-constrained installations.
The compatibility with standard operating frequencies of 50/60Hz ensures this EMI mains filter can be used in most electrical systems.
The length of 17.7mm provides a balanced form factor for easy installation in various setups.
The through hole mounting type simplifies the installation process, making it convenient for users.
The compact dimensions of this EMI mains filter make it versatile and compatible with different enclosure sizes.
The rated current of 0.4A indicates the maximum current capacity of this EMI mains filter, suitable for low-power applications.
The height of 12.6mm complements the overall dimensions of this EMI mains filter, enhancing its compact design.
EMI Mains Filters RN112-0.4-02-39M attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Silicon Standard
SS14+
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
New England Semiconductor
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
RN102-1-02-3M0
Schaffner Holding Ag
RN102-1-02-3M0 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L14.0xB14.0xH9.0 mm, it is designed for through-hole mounting in various electronic systems.
SCR25B-105-1R3A035JH
KEMET Corporation
KEMET Corporation's SCR25B-105-1R3A035JH is a UL approved EMI mains filter with 500V rated voltage and 10.5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter suitable for through-hole mounting applications.
SSHB21HS-10145
KEMET SSHB21HS-10145 is a UL approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 130°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions (23mm W x 26mm L x 15.5mm H) and through-hole mounting design.
RN202-1-02-3M0
Schaffner Holding Ag's RN202-1-02-3M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 1A. It is suitable for applications requiring single-phase EMI filtering in various industries.
ESP-03-221
Cosel
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
SSRH24NH-30145
KEMET Corporation's SSRH24NH-30145 is a UL-approved EMI mains filter with 250V rated voltage and 3A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and has a compact size of 25.5mm x 18mm x 25.5mm. Ideal for single-phase EMI filtering applications requiring reliable performance in various electronic devices.
6VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
7448030509
Wuerth Elektronik & Kg
Wurth Elektronik 7448030509 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A rated current. Operating from -40 to 125 °C, it's ideal for EMI mains filtering in various applications due to its compact dimensions of L22.0XB13.5XH25.0 mm and through-hole mounting design.
SCR25XV-150-1R6A010JV
KEMET's SCR25XV-150-1R6A010JV is a 15A, 1000V SINGLE PHASE EMI FILTER with 100 Mohm Insulation Resistance. Operating from -40 to 120 °C, it's ideal for EMI mains filtering applications. Dimensions: 26mm W x 35.5mm L x 33.5mm H, TRAY packing, THROUGH HOLE MOUNT type.
SC-03-06G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; High Pot: 500 V; Width (mm): 14; Length: 17.5 mm;
FN3256H-120-35-R69
Schaffner's FN3256H-120-35-R69 is a 3-phase EMI filter with 480V rated voltage, 120A current, and -25 to 100°C operating temperature range. Approved by EN, IEC, CSA, UL for applications requiring high-potential of 1300V and max leakage current of 0.9mA. Ideal for panel mounting in industrial settings with a frequency of 60Hz.
SS26V-070510
SS26V-070510 by KEMET Corporation is a single-phase EMI filter with a rated voltage of 250 V. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 120 °C. This filter is commonly used for EMI mains filtering applications.
CMS2-1-R
Eaton Corporation
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
7448640405
Wurth Elektronik 7448640405 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 0.45A rated current, and -40 to 125°C operating temperature range. It is used for EMI mains filtering applications due to its compact dimensions of L21.2xB21.2xH17.8 mm and through-hole mounting design.
7448061507
Wurth Elektronik 7448061507 is a single-phase EMI filter with 250V rated voltage and 15A current. It has approvals from ENEC-10 and VDE, operating at temperatures from -40 to 125°C. Ideal for applications requiring through-hole mounting, it measures L46.0xB27.0xH46.0mm and is designed for EMI mains filtering at 50Hz frequency.
10VSB1
The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
CMS2-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 2.8 A; Maximum Operating Temperature: 160 Cel; Packing Method: TAPE AND REEL; Width (mm): 8.89; Manufacturer Series: CMS;
20EQ1
SINGLE PHASE EMI FILTER; Maximum Frequency: .02 MHz; Rated Current: 20 A; Height: 57.9 mm; Insertion Loss At Maximum Frequency: 10 dB; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
10EMC1
10EMC1 by TE Connectivity is a UL, VDE, and CSA approved EMI mains filter with a rated voltage of 250V. It operates at temperatures ranging from -10°C to 40°C and has a max leakage current of 0.21mA. This single-phase filter has a rated current of 10A and is designed for panel mounting applications in systems requiring effective electromagnetic interference suppression.
PLA10AN1522R0R2
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 16.0; Length: 18 mm; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN112-4-02-0M7
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Approvals (V): UL; IEC; VDE; ENEC-10; Packing Method: TUBE; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Rated Voltage: 300 V;
RN112-0.5-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Width (mm): 17.1; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Height: 12.6 mm;
RN114-4-02-1M5
RN114-4-02-1M5 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A rated current. It operates b/w -40°C to 100°C temperatures and at 50/60Hz frequency. This single-phase filter is designed for through-hole mounting applications.
RN112-0.8-02-10M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Length: 17.7 mm; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
RN112-0.5-02-18M
Schaffner Holding Ag's RN112-0.5-02-18M EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rated voltage and 0.5A current. Ideal for single-phase applications with operating temp range -40 to 100°C. Through-hole mount type filter with compact dimensions of L17.7xB17.1xH12.6mm suitable for 50/60Hz frequency use.
RN114-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Dimensions: L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch); Maximum Operating Temperature: 100 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10;
RN114-4-02
RN114-4-02 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. Approved by UL and VDE, it operates at -40 to 125 °C, suitable for applications requiring EMI mains filtering in a compact design.
RN112-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Approvals (V): UL; IEC; VDE; ENEC-10; Operating Frequency (Hz): 50/60Hz; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
RN112-1.2-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Approvals (V): UL; IEC; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Operating Frequency (Hz): 50/60Hz;
RN114-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 21.5;
RN114-3-02-2M0
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Length: 22.5 mm; Approvals (V): UL; IEC; VDE; ENEC-10;
RN112-0.4-02
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Rated Voltage: 250 V; Approvals (V): UL; VDE;
RN112-0.4-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Maximum Operating Temperature: 100 Cel; Rated Voltage: 300 V; Width (mm): 17.1; Height: 12.6 mm;
RN112-0.6-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Height: 12.6 mm; Length: 17.7 mm; Width (mm): 17.1; Minimum Operating Temperature: -40 Cel;
RN112-1.5-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Length: 17.7 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT;
RN112-2-02-1M0
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Approvals (V): UL; IEC; VDE; ENEC-10; Length: 17.7 mm;
RN112-2-02-1M8
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 17.1; Approvals (V): UL; IEC; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN112-2.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Mounting Type: THROUGH HOLE MOUNT; Height: 12.6 mm; Length: 17.7 mm;
RN112-3.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Length: 17.7 mm; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Rated Voltage: 300 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved