Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's RN112-0.8-02-10M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI filter with 300V rated voltage and 0.8A current. Operating at -40 to 100 °C, it's ideal for applications requiring EMI mains filtering in a compact L17.7xB17.1xH12.6 mm through-hole mount design.
Median Price
$2.080
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.440
100+ parts
$1.390
1k+ parts
$1.380
10k+ parts
$1.220
Element14
$2.042
$1.968
$1.777
-
Mouser Electronics
$1.340
$1.240
$1.160
Newark
$1.480
$1.280
Distrelec
$2.090
$1.372
$1.093
DigiKey
$2.200
$1.487
$1.223
$1.132
TE Connectivity
$3.740
Arrow
$1.263
$1.025
Master Electronics
$1.335
$1.034
$0.990
Verical
$4.857
Nova Conductors
$1.004
TME
$1.690
Bristol Electronics
$2.400
$1.488
$0.900
NAC Semi
$1.680
IBS Electronics
$1.935
$1.419
$1.304
Sensible Micro Corp
Vyrian
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Electro Sonic
$1.450
$0.980
Schukat
$1.072
Argo Parts USA
Corohmni
$1.550
Continental Prestige Electronics
$1.830
$1.190
Aztec Data Supply Inc.
$2.245
CoreStaff
$8.373
$3.195
Perfect Parts
Abacus Technologies
GreenTree Electronics
Netroflash
$0.984
$0.954
$0.934
Having multiple approvals ensures that the product meets various safety and quality standards, making it a reliable choice for different applications.
The high rated voltage of 300V allows this EMI mains filter to be used in a wide range of electrical systems without the risk of overloading.
The single-phase EMI filter design helps to effectively reduce electromagnetic interference, ensuring cleaner power output and improved performance of connected equipment.
With a maximum operating temperature of 100°C, this EMI mains filter can withstand high temperatures without compromising its functionality, making it suitable for various environments.
The low minimum operating temperature of -40°C ensures that this EMI mains filter can also function effectively in cold environments, providing versatility in its usage.
The compact width of 17.1mm allows for easy installation and integration of this filter into different electronic setups or systems with limited space.
The compatibility with standard operating frequencies of 50/60Hz makes this EMI mains filter suitable for use in most power systems and equipment.
The through-hole mounting type simplifies the installation process and provides a secure and stable attachment to the circuit board or device, ensuring reliable performance.
The specified dimensions offer a compact form factor for this EMI mains filter, making it ideal for applications where space is limited while still maintaining effective filtering capabilities.
The rated current of 0.8 A indicates the maximum current that can pass through this filter without causing any issues, ensuring compatibility with various electronic devices and appliances.
The moderate height of 12.6mm allows for easy stacking or placement of this EMI mains filter within a system, maximizing space utilization without compromising performance.
EMI Mains Filters RN112-0.8-02-10M attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
1N4148WT
Diotec Semiconductor Ag
Littelfuse
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Synsemi
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SCF29XV-250-2R2A008JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
CMS1-12-R
Eaton Corporation
Eaton Corporation's CMS1-12-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. With dimensions of L9.4XB7.2XH2.6 (mm), it operates b/w -40 to 160 °C, suitable for surface mount applications at a rated current of 1.15 A.
3-103-712
Schurter Ag
Schurter Ag's 3-103-712 is a SINGLE PHASE EMI FILTER with 240V rated voltage, CSA, EN, IEC, UL approvals. It operates at -40 to 100°C and has a max leakage current of 0.5mA. Ideal for PANEL MOUNT applications with 12A rated current.
6VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
6MV1
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 6 A; Insertion Loss At Maximum Frequency: 50 dB; Maximum Leakage Current: .07 mA; Minimum Frequency: .15 MHz;
1-6609037-4
TE Connectivity's 1-6609037-4 is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 40°C. With dimensions of L93.73XB57.66XH45.72 (mm), it is panel mountable and suitable for applications requiring a rated current of 15A.
10VW1
The TE Connectivity 10VW1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 18 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SCR-050-0R9A070JH
KEMET Corporation's SCR-050-0R9A070JH is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 50°C, and has dimensions of L29.0xB23.0xH27.0 mm. Ideal for EMI mains filtering applications with through hole mounting requirements.
RWK5420-1000-99-E0XXT
Schaffner Holding Ag
THREE PHASE EMI FILTER;
SC-26-S010JH
KEMET Corporation's SC-26-S010JH is a 3-phase EMI mains filter with 500V UL approval. It offers a rated current of 26A, insulation resistance of 500 Mohm, and operates b/w -25°C to 120°C. Ideal for applications requiring high-pot testing up to 100V, it has a diameter of 50mm and height of 28mm for through-hole mounting in various electronic systems.
6EHT3
TE Connectivity's 6EHT3 is a CSA, UL, VDE approved EMI mains filter with 250V rated voltage and 6A rated current. With single-phase filter type, it operates at -10 to 40°C temperatures and offers high pot of 2250V. Ideal for panel mounting applications due to its compact dimensions of L85.9xB54.6xH46 mm (L3.38xB2.15xH1.81 inch).
FN406-1-02
Schaffner Holding Ag's FN406-1-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 1A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at -25 to 100 °C and has a max leakage current of 0.373 mA. Ideal for applications requiring through-hole mounting and high-pot testing up to 2000V in frequency range of 50/60Hz.
ESP-03-221
Cosel
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
20VR6
The TE Connectivity 20VR6 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for applications requiring EMI mains filtering in electronic systems.
FN332Z-3-05
Schaffner Holding Ag's FN332Z-3-05 is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 3.6A current. With dimensions of L40.0xB28.0xH24.8 (mm), it operates at temperatures from -25 to 100 °C, making it ideal for panel mount applications requiring effective electromagnetic interference suppression in the frequency range of 50/60Hz.
10VR6
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
B84142B0012R000
TDK
TDK's B84142B0012R000 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 12A rated current. It offers high pot of 2700V and max leakage current of 3.5mA. Ideal for panel mount applications, measuring L121.0xB113.0xH61.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic systems.
8-1609148-2
TE Connectivity's 8-1609148-2 EMI Mains Filter is a THREE PHASE filter with 520V rated voltage and 250A rated current. It operates b/w -10°C to 50°C, with max leakage current of 222mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
SSR21NV-M20125
KEMET Corporation's SSR21NV-M20125 is a UL approved EMI mains filter with 250V rated voltage and 2A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L22.0xB16.0xH27.0 mm. Ideal for applications requiring single-phase EMI filtering in electronic devices.
400APS12L
TE Connectivity's 400APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and max operating temperature of 50°C. With a rated current of 400A, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN112-0.4-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Height: 12.6 mm; Maximum Operating Temperature: 100 Cel;
RN112-4-02-0M7
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Approvals (V): UL; IEC; VDE; ENEC-10; Packing Method: TUBE; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Rated Voltage: 300 V;
RN112-0.5-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Width (mm): 17.1; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Height: 12.6 mm;
RN114-4-02-1M5
RN114-4-02-1M5 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A rated current. It operates b/w -40°C to 100°C temperatures and at 50/60Hz frequency. This single-phase filter is designed for through-hole mounting applications.
RN112-0.5-02-18M
Schaffner Holding Ag's RN112-0.5-02-18M EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rated voltage and 0.5A current. Ideal for single-phase applications with operating temp range -40 to 100°C. Through-hole mount type filter with compact dimensions of L17.7xB17.1xH12.6mm suitable for 50/60Hz frequency use.
RN114-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Dimensions: L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch); Maximum Operating Temperature: 100 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10;
RN114-4-02
RN114-4-02 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. Approved by UL and VDE, it operates at -40 to 125 °C, suitable for applications requiring EMI mains filtering in a compact design.
RN112-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Approvals (V): UL; IEC; VDE; ENEC-10; Operating Frequency (Hz): 50/60Hz; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
RN112-1.2-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Approvals (V): UL; IEC; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Operating Frequency (Hz): 50/60Hz;
RN114-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 21.5;
RN114-3-02-2M0
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Length: 22.5 mm; Approvals (V): UL; IEC; VDE; ENEC-10;
RN112-0.8-02
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Approvals (V): UL; VDE; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Height: 12.6 mm;
RN112-0.4-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Maximum Operating Temperature: 100 Cel; Rated Voltage: 300 V; Width (mm): 17.1; Height: 12.6 mm;
RN112-0.6-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Height: 12.6 mm; Length: 17.7 mm; Width (mm): 17.1; Minimum Operating Temperature: -40 Cel;
RN112-1.5-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Length: 17.7 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT;
RN112-2-02-1M0
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Approvals (V): UL; IEC; VDE; ENEC-10; Length: 17.7 mm;
RN112-2-02-1M8
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 17.1; Approvals (V): UL; IEC; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz;
RN112-2.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Mounting Type: THROUGH HOLE MOUNT; Height: 12.6 mm; Length: 17.7 mm;
RN112-3.6-02-0M4
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Length: 17.7 mm; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Rated Voltage: 300 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved