Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK RSEL-2003W is a single-phase EMI mains filter with 250V rated voltage and 3A rated current. It offers approvals from UL, CSA, and EN, with a max operating temperature of 85°C. Ideal for chassis mounting applications requiring effective filtering at 60Hz frequency.
Median Price
$9.960
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$8.420
100+ parts
$7.610
1k+ parts
$7.340
10k+ parts
$7.030
RS (Exports)
$8.440
-
Verical
$9.659
Mouser Electronics
RS Americas
$12.660
DigiKey
$15.550
$10.352
$9.730
Misumi USA
$17.730
Nova Conductors
$9.188
Vyrian
ACDS - Activité Composants Distribution Service
Aztec Data Supply Inc.
$0.495
Corohmni
$3.162
Advanced Electronics
$3.222
$3.061
Semicontronic
$5.750
$5.606
$5.578
Ampacity Inc.
Continental Prestige Electronics
$9.004
Netroflash
CoreStaff
$11.929
$6.109
Allen Electronics Distributors
Neutron USA
$34.990
Argo Parts USA
Kepictronics
High insulation resistance ensures safety and prevents electrical leakage, making this filter a reliable choice for protecting electronic equipment.
Having approvals from UL, CSA, and EN demonstrates compliance with international standards and quality assurance, ensuring the product's reliability and performance.
Suitable for a wide range of applications that require filtering at 250 volts, providing versatility and compatibility across different systems.
Designed specifically for single-phase systems, offering efficient electromagnetic interference filtering for improved signal quality and system reliability.
With a high maximum operating temperature, this filter can withstand heat and maintain performance even in demanding conditions.
Capable of functioning in cold environments, making it suitable for a variety of applications in different temperature settings.
Compact size allows for easy integration into various systems without taking up too much space, ideal for applications with limited room.
Designed to work efficiently at 60Hz, which is a common frequency in many electrical systems, ensuring compatibility and reliable performance.
Optimal length for effective filtering and easy installation, making it a convenient choice for applications that require a filter of this size.
Low leakage current helps prevent energy loss and ensures the filter operates effectively without wasting electricity, making it an energy-efficient choice.
Chassis mounting provides secure installation and stability, ideal for applications where the filter needs to be firmly attached to the equipment or system.
Compact dimensions make this filter versatile and easy to integrate, suitable for a wide range of applications while offering flexibility in installation.
With a rated current of 3A, this filter is suitable for applications that require filtering at this current level, providing efficient EMI suppression.
Low height makes this filter compact and space-saving, allowing for easy integration into different systems while maintaining a sleek and unobtrusive design.
EMI Mains Filters RSEL-2003W attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
Minimum Insulation Resistance:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Electronic Devices
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
Frontier Electronics
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
RN202-0.6-02-4M4
Schaffner Holding Ag
Schaffner Holding Ag's RN202-0.6-02-4M4 is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.6A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L18.2xB8.8xH13.5 mm for through-hole mounting in various electronic devices.
SS11VL-06180
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 18 MILLIHENRY;
B82722J2202N001
TDK
TDK B82722J2202N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
LF-202U-1
KEMET Corporation
KEMET LF-202U-1 EMI Mains Filter has 300 Mohm Min Insulation Resistance, 250V Rated Voltage, and -20 to 55 °C Operating Temp. UL approved for PANEL MOUNT application in SINGLE PHASE systems with 60Hz freq.
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
FN2010-12-06
FN2010-12-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH29.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems up to 13.8A.
10EK3
TE Connectivity
The TE Connectivity 10EK3 is a UL, CSA, VDE approved EMI mains filter with insertion loss of 8-45 dB. Rated for 250V and 10A, it operates at frequencies from 0.15-30 MHz. Ideal for single-phase applications, this panel-mount filter has dimensions of L71.4xB52.6xH29.5 mm and withstands temperatures from -10 to 40°C.
MR-2021
The KEMET MR-2021 EMI Mains Filter is rated for 250V with a max operating temperature of 55°C. It has a min insulation resistance of 300 Mohm and a rated current of 2A, making it suitable for single-phase EMI filtering applications. Approved by CSA and UL, this filter has dimensions of 40mm x 49mm x 27mm and can be chassis mounted.
NAH-10-472
Cosel
The Cosel NAH-10-472 is a single-phase EMI filter with 250V rated voltage and 10A rated current. It has approvals from UL, CSA, VDE, and ENEC-10 for quality assurance. Ideal for chassis mount applications in electronics to reduce electromagnetic interference at operating temperatures ranging from -40°C to 85°C.
RC112-0.4-15M
RC112-0.4-15M by Schaffner Holding Ag is an EMI mains filter with UL, IEC, VDE, EN approvals. It has 2 functions and a rated voltage of 250V. With inductance of 15000uH, it's ideal for data line filtering applications due to its compact size and through-hole mounting design.
CMS1-5-R
Eaton Corporation
Eaton Corporation's CMS1-5-R EMI Mains Filter is a single-phase filter with 4 terminals, UL approval, and rated current of 3.6A. With dimensions of L9.4xB7.2xH2.6 mm, it operates b/w -40°C to 160°C and is ideal for surface mount applications in electronic devices.
NAH-20-472
NAH-20-472 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and dimensions of L92.0XB53.0XH41.0 (mm), it is suitable for chassis mount applications requiring up to 20A current capacity.
SSR10VS-08180
KEMET Corporation's SSR10VS-08180 EMI Mains Filter is UL approved with a rated voltage of 250V. It offers a min insulation resistance of 100 Mohm and can operate b/w -25°C to 120°C. This single-phase filter, with a rated current of 0.8A, is ideal for applications requiring effective electromagnetic interference suppression.
RSEL-2002WL
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 50 mm; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel;
CMS1-10-R
Eaton Corporation's CMS1-10-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.65A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
FN3270H-320-99
Schaffner Holding Ag's FN3270H-320-99 is a UL, CSA, ENEC-14 approved 3-phase EMI filter with 520V rated voltage and 320A rated current. With a max operating temperature of 100°C, it is ideal for panel mount applications requiring effective filtering at 60Hz frequency. Dimensions: L240.0xB200.0xH86.0mm.
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
10ET1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Height: 45.7 mm; Approvals (V): UL; CSA; VDE; Manufacturer Series: T;
7448041104
Wuerth Elektronik & Kg
Wurth Elektronik 7448041104 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 11A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring EMI mains filtering at 50Hz frequency.
SN8S-30P2
KEMET Corporation's SN8S-30P2 is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating from -25°C to 105°C, it has a diameter of 19mm and height of 10.5mm for through-hole mounting applications in EMI mains filters.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RSEL-2003WL
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 60Hz; Width (mm): 45;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 20 mm; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Width (mm): 40;
RSEL-2003W
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
RSEL-2005M
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Minimum Insulation Resistance: 100 Mohm; Height: 30 mm; Width (mm): 38.0; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 30 mm; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 45 mm; High Pot: 500 V; Height: 20 mm; Minimum Operating Temperature: -25 Cel;
RSEL-2006A
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: CHASSIS MOUNT; Height: 20 mm; Minimum Insulation Resistance: 100 Mohm; Dimensions: L50.0XB45.0XH20.0 (mm)/L1.969XB1.772XH0.787 (inch);
RSEL-2003A
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Leakage Current: 1 mA; Height: 20 mm; Operating Frequency (Hz): 60Hz; Length: 50 mm;
RSEL-2001M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 60Hz; Minimum Insulation Resistance: 100 Mohm; Approvals (V): UL; CSA; EN; SEMKO; Maximum Operating Temperature: 85 Cel;
RSEL-2002M
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -25 Cel; Mounting Type: CHASSIS MOUNT; Operating Frequency (Hz): 60Hz; Rated Voltage: 250 V;
RSEL-2001AL
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .01 mA; Mounting Type: PANEL MOUNT;
RSEL-2001WL
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Operating Frequency (Hz): 60Hz; Approvals (V): UL; CSA; EN;
RSEL-2003AL
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Maximum Operating Temperature: 85 Cel; Height: 20 mm; Maximum Leakage Current: .01 mA;
RSEL-2002W
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -25 Cel; Height: 20 mm; Maximum Leakage Current: 1 mA;
RSEL-2001W
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 20 mm; Maximum Leakage Current: 1 mA; Operating Frequency (Hz): 60Hz; Length: 50 mm;
RSEL-2001A
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Leakage Current: 1 mA; Length: 50 mm; Width (mm): 45; Maximum Operating Temperature: 85 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Operating Temperature: 85 Cel; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel; Approvals (V): UL; CSA; EN;
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 60Hz; Length: 50 mm; Maximum Leakage Current: 1 mA; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 85 Cel; Approvals (V): UL; CSA; EN; SEMKO; Length: 50 mm; Dimensions: L50.0XB32.0XH23.0 (mm)/L1.969XB1.26XH0.906 (inch);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved