Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 50 mm; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel;
Median Price
$9.200
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$8.420
100+ parts
$7.100
1k+ parts
$6.320
10k+ parts
$5.700
RS (Exports)
$8.440
-
Mouser Electronics
$9.960
RS Americas
$11.790
DigiKey
$15.550
$10.352
$9.730
Verical
$7.670
Nova Conductors
$9.144
Vyrian
Ampacity Inc.
$5.810
AZTECH Wire
$6.841
Continental Prestige Electronics
$8.961
Netroflash
Allen Electronics Distributors
$12.660
Neutron USA
$34.990
Authorized Procurement Solutions
Argo Parts USA
EMI Mains Filters RSEL-2002WL attributes and parameters. Explore more EMI Mains Filters devices from TDK-Lambda
Approvals (V):
Filter Type:
Height:
Minimum Insulation Resistance:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
TDK-Lambda was created in 2008 through a merger with the power supply business of TDK. The company is now a leader in the power supply field. With R&D bases located in five key areas, namely Japan, China, the rest of Asia, Europe, and America, and a comprehensive framework extending from development and manufacture to marketing and service, we can swiftly meet any customer requirements and needs. The highly efficient and utterly reliable power supplies from TDK-Lambda reflect the advanced materials technology, process technology, evaluation & simulation technology, circuit design technology and other core technologies of the TDK Group. Our products play a vital role in many sectors of the industry, including telecommunications, data communications, medical facilities, testing and measurement, rail transport, automotive applications, and LED devices. In the market for industrial equipment power supplies where reliability is especially important, TDK-Lambda is the top player worldwide.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Rochester Electronics
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Daco Semiconductor
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
3-103-715
Schurter Ag
Schurter Ag's 3-103-715 EMI Mains Filter is a single-phase filter with 250V rated voltage and 3A rated current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries due to its compact size of 25mm x 104mm x 82.6mm.
RSHN-2006D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: DIN RAIL MOUNT; Minimum Operating Temperature: -25 Cel; Dimensions: L98.0XB52.0XH35.0 (mm)/L3.858XB2.047XH1.378 (inch); Height: 35 mm;
6EDP
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 6 A; Length: 36.6 mm; Insertion Loss At Minimum Frequency: 10 dB; Insertion Loss At Maximum Frequency: 40 dB;
10VSB1
TE Connectivity
The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
RTEN-5060
THREE PHASE EMI FILTER; Rated Current: 60 A; Dimensions: L170.0XB90.0XH54.0 (mm)/L6.693XB3.543XH2.126 (inch); Operating Frequency (Hz): 60Hz; Maximum Leakage Current: 5 mA; Maximum Operating Temperature: 85 Cel;
1VB1
1VB1 by TE Connectivity is a SINGLE PHASE EMI FILTER with UL, CSA, VDE approvals. It offers 15 dB insertion loss at 0.15 MHz and 50 dB at 30 MHz. Ideal for applications requiring EMI mains filtering in a compact panel mount design.
1-6609032-3
TE Connectivity's 1-6609032-3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 10A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SC-02-30G
KEMET Corporation
KEMET Corporation's SC-02-30G EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 105°C. It is UL approved for single-phase filtering applications. With dimensions of L17.5xB14.0xH17.5 mm, it is designed for through-hole mounting with a rated current of 2A.
FN2010B-16-06
Schaffner Holding Ag
Schaffner Holding Ag's FN2010B-16-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and can handle a high pot of 2500V. This single-phase filter is panel mountable and ideal for applications requiring effective electromagnetic interference suppression.
RSHN-2006
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Operating Frequency (Hz): 60Hz; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel; High Pot: 2500 V;
SC-35-D010JH
KEMET SC-35-D010JH EMI Mains Filter rated at 250V, 35A with UL approval. Features single-phase filter type, -25 to 120°C operating temp range. Ideal for noise suppression in electronic equipment.
810913020
Wuerth Elektronik & Kg
Wurth Elektronik's 810913020 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A current. It operates b/w -25°C to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
PLH10AN1612R1P2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 160 MICRO HENRY; HIGH-FREQUENCY TYPE; CORE VERTICAL TYPE STRUCTURE; ALIGNED WINDING TYPE; JESD-609 Code: e2;
7448014501
Wurth Elektronik 7448014501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications. Compact at L15.0xB7.5xH16.0 (mm), it offers through-hole mounting and TIN COPPER terminal finish for efficient use in various electronic devices.
SCF-03-650
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 12.0; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -25 Cel; No. of Terminals: 4;
SU9VF-02100
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
RSEN-2010D
TDK
The TDK RSEN-2010D is a single-phase EMI filter with 250V rated voltage and 10A rated current. It offers approvals from UL, CSA, EN and operates b/w -25°C to 85°C. With dimensions of L98.0xB52.0xH43.5 (mm), it is ideal for panel mount applications requiring high insulation resistance and low leakage current.
PLA10AN4330R3R2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
600APS12L
TE Connectivity's 600APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a high pot of 2200V and max leakage current of 270mA. Ideal for panel mounting applications, this filter operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
SS30V-R180190
KEMET Corporation's SS30V-R180190 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max operating temperature of 120°C. With a rated current of 1.8A, it is designed for through-hole mounting applications where EMI filtering is required to ensure optimal performance and reliability in electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RSEL-2003WL
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 60Hz; Width (mm): 45;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 20 mm; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Width (mm): 40;
RSEL-2003W
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Leakage Current: 1 mA; Rated Voltage: 250 V; Approvals (V): UL; CSA; EN; Operating Frequency (Hz): 60Hz;
RSEL-2005M
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Minimum Insulation Resistance: 100 Mohm; Height: 30 mm; Width (mm): 38.0; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 30 mm; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
RSEL-2002WL
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 45 mm; High Pot: 500 V; Height: 20 mm; Minimum Operating Temperature: -25 Cel;
RSEL-2003AL
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 20 mm; Maximum Operating Temperature: 85 Cel; Rated Voltage: 250 V; Mounting Type: PANEL MOUNT;
RSEL-2006AL
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .001 mA; Width (mm): 40; Minimum Insulation Resistance: 100 Mohm;
RSEL-2006A
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: CHASSIS MOUNT; Height: 20 mm; Minimum Insulation Resistance: 100 Mohm; Dimensions: L50.0XB45.0XH20.0 (mm)/L1.969XB1.772XH0.787 (inch);
RSEL-2003A
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Leakage Current: 1 mA; Height: 20 mm; Operating Frequency (Hz): 60Hz; Length: 50 mm;
RSEL-2002M
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -25 Cel; Mounting Type: CHASSIS MOUNT; Operating Frequency (Hz): 60Hz; Rated Voltage: 250 V;
RSEL-2001WL
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Operating Frequency (Hz): 60Hz; Approvals (V): UL; CSA; EN;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Maximum Operating Temperature: 85 Cel; Height: 20 mm; Maximum Leakage Current: .01 mA;
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Maximum Leakage Current: .001 mA; Height: 20 mm;
RSEL-2006WL
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Maximum Leakage Current: .001 mA; Width (mm): 40; Maximum Operating Temperature: 85 Cel; Mounting Type: PANEL MOUNT;
RSEL-2002A
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Mounting Type: PANEL MOUNT; Width (mm): 45; Height: 20 mm;
RSEL-2001W
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 20 mm; Maximum Leakage Current: 1 mA; Operating Frequency (Hz): 60Hz; Length: 50 mm;
RSEL-2001A
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Leakage Current: 1 mA; Length: 50 mm; Width (mm): 45; Maximum Operating Temperature: 85 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 85 Cel; Approvals (V): UL; CSA; EN; SEMKO; Length: 50 mm; Dimensions: L50.0XB32.0XH23.0 (mm)/L1.969XB1.26XH0.906 (inch);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved